424071
37
Zoom out
Zoom in
Previous page
1/44
Next page
37
User Manual
Problems when faxing or printing
Faxes are of poor quality.
Change the resolution setting to F or f.
Check the document or set a higher contrast with function
47 (see chapter Fax & Copy / Contrast).
Test the fax machine by making a copy. If your copy is fault-
less the correspondent’s fax machine might be defective.
Call service if necessary.
Your fax or your recipient’s fax machine produces
black lines when printing.
Clean the scanner with a cloth (see Care).
Test the fax machine by making a copy. If your copy is fault-
less the correspondent’s fax machine might be defective.
Call service if necessary.
Copy is blank. Load the document with the printed side up.
Call service if necessary.
Problems with the connection
Your fax machine rings once, then there is a mo-
ment of silence and another ring signal after that.
This is entirely normal. After the first ring signal the fax ma-
chine takes over the call. When the fax machine has recog-
nised that the incoming call is a telephone correspondence,
the fax machine will continue to ring.
NO CONNECTION
or REDIAL FAILED
Try later or draw your fax partner’s attention to a possible
installation fault.
NO LOOP CURRENT
Check the installation of your fax machine.
When you lift the receiver of your fax machine
you do not hear the dial tone. The display shows:
NO DIALTONE
Connect your telephone cable to the socket on the bottom
of your fax machine identified with LINE.
BUSY
or
fax transmissions are constantly interrupted.
Try to send the fax manually: Press DIAL/z and dial the
fax number. If the recipient is using an automatic answer-
ing device, wait until you hear a tone after the pre-recorded
message. Press START.
You cannot receive any faxes. Set the number of ringing signals for the answering machine
or the total number of ringing signals with function 31 or
32 to lower than five.
On lifting the handset you hear a tone or silence.
You are receiving a fax. At the fax machine: Press START.
At an additional telephone: press * and 5. Replace the
handset.
EXTERNAL PHONE
The red lamp v flashes.
This is not a fault.
You are now using an additional tele-
phone.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips magic 3 primo ppf 531 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips magic 3 primo ppf 531 in the language / languages: English as an attachment in your email.

The manual is 8,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips magic 3 primo ppf 531

Philips magic 3 primo ppf 531 User Manual - German - 44 pages

Philips magic 3 primo ppf 531 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info