521763

Philips Magic 2 Manual

17
Zoom out
Zoom in
Previous page
1/40
Next page
17
Die Faxweiche
If you cannot receive any faxes, you may have set both
ringing signal numbers too high (see points 2 and 4). Set
both ringing signal numbers to values lower than five .
If you are using other devices apart from the fax machine
(telephones, answering machines), which are not connected by
serial links (see Glossary), the ringing pattern may change as
follows: Other devices ring as often as set under
FAX RINGS
.
Your fax will ring as often as set under
TAM RINGS
or
TOTAL RING
S
.
Special settings
Silent fax reception FAX RINGS: 0
To receive faxes without any ring signals, set the amount of ring
signals in
FAX RINGS
to 0.
Completely silent operation
You should use this option only with devices with integral answer-
ing machines. If, for example, you do not wish to be disturbed by calls
or faxes arriving at night, you may set the number of ringing signals to 0.
Faxes are then received silently and calls are immediately answered by the
answering machine, provided you have switched the answering machine
on.
For devices without integral answering machine the fax-switch
is turned off, i.e. your device immediately switches over to fax reception
and will not ring, when calls are received (the caller hears a whistling
tone).
ATTENTION: For this reason calls cannot be recorded by any
external answering machine which may be connected.
Manual fax reception fax: manual
If you select
fax: manu
a
, then faxes are only automati-
cally printed out by your fax machine, if you activate the fax
reception by pressing START. This may be sensible for example,
if you wish to receive your faxes by modem at your computer.
Economy operating mode - answering machine *)
TAM RINGS: 5/2
If you select option 5/2 at
TAM RINGS:
, then your answering
machine will start after two ringing signals instead of after five,
when you receive messages. Via the remote access function you
have the opportunity to check, whether your answering machine
holds any messages without incurring telephone costs (if your
answering machine turns itself on after only two ringing signals
you will know, that new messages have been left). After listening
to your new messages your answering machine will, at the next
call, switch itself on again after five ringing signals.
Mode
UU
UU
U
The default operating mode set in the factory is S. You may
also select operating mode U. In mode U your machine switches
automatically between S and M. The factory setting provides
that your machine switches at 10 pm to M and at 6 am back to
S.
UU
UU
U activating/deactivating
1 If you want to switch on function U, press SM for two seconds,
until you hear a confirmation tone and U appears on the display.
2 If you want to switch off function U, press SM for two
seconds, until you hear a confirmation tone and U
disappears. On the display appears S or M.
UU
UU
U configuring/checking
1 Select function 33 by pressing MENU and numbers 3 and
3. Press OK.
2 Enter the time at which you want your fax machine to
switch automatically to S and confirm with OK.
3 Enter the time at which you want your fax machine to
switch automatically to M. To confirm your settings press
OK.
EASYLINK
Setting additional devices
The three codes below will help you, when you receive a call on an
additional telephone and wish to transfer a call or fax to your fax ma-
chine.
1 Code for starting your fax machine from another telephone: *5
2 Serial connection (see Glossary): Code for transferring a call
from another telephone connected serial to your fax machine:
*0
Please note that when using this code you have to replace
the handset of your additional device after you have
entered the code. See chapter Telephone / Call transfer.
3 Parallel connection (see Glossary): Code for turning off the
answering message, if the answering machine is switched
on: ** For fax machines without built-in answering
machine this code is used to switch off the fax machine.
*) only with built-in answering machine
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips Magic 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips Magic 2 in the language / languages: English as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips Magic 2

Philips Magic 2 User Manual - German - 44 pages

Philips Magic 2 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info