663514
12
Zoom out
Zoom in
Previous page
1/31
Next page
10
English
Connecting the speakers
Connect the supplied speaker systems using the supplied
speaker cables by matching the colours of the jacks and
speaker cables.
1 Press up (or down) the clip on the speaker’s jack and fully
insert the stripped portion of the speaker cable into the
jack, then release the clip.
8 mm
abc
2 Connect the subwoofer’s AUDIO INPUT jack to the
WOOFER LINE OUT jack and then connect the
speakers as follows :
Speakers
- +
Front Right (R) (FR) black red
Front Left (L) (FL) black white
Centre (C) black green
Surround Right (SR) black grey
Surround Left (SL) black blue
(for model LX8000SA only)
Before connecting the speakers;
Set up the speaker stands
(refer to the accompanying
“Installation Guide”) or/and
mount the speakers onto the
mini speaker stands as shown in
the illustration.
Remove the protective cover
only after the connection and
installation of speakers are
completed.
Notes:
Ensure that the speaker cables are correctly connected.
Improper connections may damage the system due to
short-circuit.
For optimal sound performance, use the supplied speakers.
Do not connect more than one speaker to any one pair of
+/- speaker jacks.
Do not connect speakers with impedance lower than the
speakers supplied. Please refer to the SPECIFICATIONS
section of this manual.
CONNECTIONS
Connecting a TV
You must connect a TV to the DVD system in order to use
the DVD system.
IMPORTANT!
There are various ways to connect the system to a
TV (as shown in the illustration below). You only
need to make ONE of the best connections,
depending on the capabilities of your TV system.
If your TV has a SCART input connector
1 Use the supplied audio cables to connect the system’s
AUDIO-TV IN (L/R) jacks to the corresponding
AUDIO OUT jacks on the TV.
2 Use the Scart cable to connect the system’s SCART
OUT jack to the corresponding SCART VIDEO IN jack on
the TV.
If your TV has a S-Video input connector
1 Use the supplied audio cables to connect the system’s
AUDIO-TV IN (L/R) jacks to the corresponding
AUDIO OUT jacks on the TV.
2 Use the S-Video cable to connect the system’s
S-VIDEO jack to the S-Video input jack on the TV.
If your TV is not equipped with a SCART or
S-Video input connector
1 Use the supplied audio cables to connect the system’s
AUDIO-TV IN (L/R) jacks to the corresponding
AUDIO OUT jacks on the TV.
2 Use the video cable (not supplied) to connect the system’s
CVBS jack to the video input jack on the TV.
Note: On the TV,
The S-Video In jack may be labeled Y/C, S-Video or S-VHS.
The CVBS jack is usually yellow and might be labeled
Video In, Composite or Baseband.
+
+
M
W
FM/MW
ANTENNA
FM
75
SCA
RT O
U
T
S-VIDEO
CVBS
V
ID
EO
O
U
T
A
U
D
IO
AUX
IN
TV
IN
LINE
O
UT
DIG
ITAL
O
UT
CENTER
O
UT
DIGITAL
IN
W
O
O
FER
LINE O
UT
CD
R
1
2
2
2
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips LX7000SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips LX7000SA in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips LX7000SA

Philips LX7000SA User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info