424302
31
Zoom out
Zoom in
Previous page
1/40
Next page
Service 31
EN
10 Wait until INSERTCARD appears on the display.
Push the Plug’n’Print card of the new toner cartridge
into the opening on the left side next to the paper tray,
with the contacts facing to the left.
11 It may take a moment to update the cartridge. When
the process is completed, the following appears on the
display:
ACTION COMPLETED / EJECT CARD.
12 Pull the Plug’n’Print card out of the device.
Restart the Recharging Process
1 Press OK, 62 and OK.
2 Using [ select
NEW BLACK.
3 Confirm with OK.
4 Using [ select
YES. After a short time, the device will
ask you to insert the Plug’n’Print card.
Toner Level Memory 3
Displaying the Toner Level
Toner Level Memory 2
1 Press OK, 62 and OK.
2 Select with [
CART CAPACITY.
3 Confirm with OK. The toner level of the toner car-
tridge is indicated by a percentile value between 100
percent (full) and 0 percent (empty).
Fixing a Paper Jam
Introduction
Your device is equipped with sensors that quickly recognise
a paper or document jam. If trouble of this sort arises, the
feeding of the printer paper or document is stopped imme-
diately.
1 Open the cover by taking hold of both document
guides and tipping the cover backward.
2 It is possible that you will have to remove the toner car-
tridge in order to reach the paper.
Should the error message
UNREADABLECARD
appear on the display, you may have inserted the
Plug’n’Print card incorrectly. The contacts must
face to the left as you insert the card into the de-
vice.
You can interrupt the recharging process at any
time, by pressing j. However, the toner level
memory must be updated for each new toner car-
tridge.
If the toner level of the cartridge is low, then every
time you open and close the cover, the following
question will appears on the display:
BLACK=NEW?. If you have not installed a new car-
tridge, press j. If you have installed a new cartridge,
press OK and follow the description set forth above.
Whenever you insert a new toner cartridge, you must
update the toner level memory of your device with
the PlugnPrint card that is included with the new
cartridge. Your device registers the extent of toner us-
age for every print-out and calculates the toner level
of the cartridge based on this. The indicated toner
level is only meaningful if you update each new toner
cartridge with the Plug’n’Print card that is provided
with the cartridge.
Carefully remove the toner cartridge from the de-
vice so that no toner dust spills out. Take care
where you place the toner cartridge, escaping ton-
er dust may soil the surface.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips lpf 925 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips lpf 925 in the language / languages: English as an attachment in your email.

The manual is 8,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info