330
19
Zoom out
Zoom in
Previous page
1/30
Next page
8. OPERATION Picture control
DATA MODE DISPLAY
Data display Fine Sync adjustments
When displaying computer patterns which are very detailed
(tiling, vertical stripes, etc.), interference may occur between
the LCD pixels, causing flickering, vertical stripes, or contrast
irregularities in portions of the screen. Should this occur, adjust
Clock, Phase, H-Pos and V-Pos for optimum computer
image (Fine Sync adjustment).
1.
Select the desired computer input mode by pressing either
Data 1 or Data 2 at the projector local keyboard or toggling
the Input button on the Remote Control unit.
2.
Press Menu. Menu bar and Picture menu screen appear.
GUI operation guide is also displayed.
3.
Press 1 / 2 to select Fine Sync.
4.
Press 3 / 4 to select a specific adjustment item.
5.
Press 1 / 2 to move the I mark of the selected
adjustment item to the desired setting.
6.
To exit from the GUI, press Menu.
Note:
To reset all adjustment items, select Reset on the Fine
Sync menu screen and press OK.
Auto Sync Adjustment
Used to automatically adjust a computer image.
Auto Sync adjustment can be made manually by pressing
Auto sync (either on local keyboard and remote control), or
automatically by setting Auto Sync to ON in the
projectors GUI menu.
When Auto Sync is set to ON:
The sync adjustment is automatically made each time the
projector is turned on while connected to a computer or the
input selection is changed.
The Auto Sync adjustment setting previously made is
cleared when the projectors setting is changed.
1.
Press Menu.
2.
Press 1 / 2 to select Fine Sync.
3.
Press 3 / 4 to select Auto Sync.
4.
Press 1 / 2 to select ON.
5
.
To exit from the GUI, press Menu.
Automatic adjustments can be made by pressing Auto sync.
When the optimum image cannot be achieved with Auto
Sync adjustment, use manual adjustments. (See Data
display Fine Sync adjustment).
During Auto Sync adjustment, the On-Screen Display changes:
Note:
Auto Sync adjustment may take some time to complete,
depending on the image of the computer connected to the
projector.
Auto Sync Display Function
Normally, an image is not superimposed during Auto Sync
adjustment. You can, however, choose to superimpose a
background image during Auto Sync adjustment.
1.
Press Menu.
2.
Press 1 / 2 to select Options
3.
Press 3 / 4 to select Auto Sync Disp.
4.
Press 1 / 2 to select “” to superimpose a background
image or “” to remove the background image during
Auto Sync adjustment.
5.
To exit from the GUI, press Menu.
17
English
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips lc1041 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips lc1041 in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info