330
11
Zoom out
Zoom in
Previous page
1/30
Next page
6. SET UP
LENS ADJUSTMENT
Focus, Zoom and electronic Keystone
1.
Press Lens to select mode.
Each time Lens is pressed, the screen changes in the
following order.
2.
Press OK to display test pattern.
3.
Press 1, 2, 3 or 4 to make adjustments.
4.
Press Lens until normal screen appears.
Note:
The On Screen Displays will automatically disappear when
no changes have been made within 30 seconds.
Straight lines and the edges of the displayed image may
appear jagged, when adjusting the KEYSTONE setting.
Do not touch the lens when adjusting the focus or zoom.
CAUTION!
When all required adjustments have been made, switch off the
projector before making any other connections (see
Installation).
MOVING THE PROJECTOR
1.
Press the Standby/OFF button to switch off the projector.
The standby indicator lights up red.
2.
Wait until the cooling fan has stopped (about 2 minutes after
the projector has been switched off) and disconnect the
mains lead and all other cables.
3.
Put the lens cap back in place to prevent dust, dirt or other
contamination from harming or damaging the front of the
projector lens when moving the projector.
4.
When transporting the projector, carry it by the carrying
handle on the side.
CAUTION!
Do not lift or carry the projector by the lens or the lens cap as
this may damage the lens.
INSERTING THE BATTERIES IN THE REMOTE CONTROL
1.
Press in and downward on the arrow to remove the battery
cover.
2.
Insert three AA size batteries for the remote control, making
sure their polarities match the (+) and (-) marks inside the
battery compartment.
3.
Insert the side tabs of the battery cover into their slots and
press the cover in until it is properly seated.
CAUTION!
Do not mix old and new batteries (also never mix alkaline and
manganese batteries).
Push
KEYSTONE
END
ADJUST
EXIT TEST PTRN
OK
KEYSTONE
END (Lens)
ADJUST
OK
TEST PTRN
NEXT (Lens)
ADJUST
ZOOM
OK
FOCUS
NEXT (Lens)
ADJUST
OK
9
English
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips lc1041 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips lc1041 in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info