44365

Philips Laserfax 725 Manual

19
Zoom out
Zoom in
Previous page
1/32
Next page
19
Memory
If there is no paper in the paper tray or if the toner is empty,
incoming faxes will be stored in memory (around 120 pages
according to Slerexe letter). If an incoming fax has been stored
in memory the display will show . Once the
paper tray is refilled or the toner replaced all the faxes stored in
memory can be printed out (see Printing from memory).
When a fax has been printed it is deleted from memory. If
printing is interrupted all the faxes that have not yet been printed
in full remain in memory. Once the memory is full no further
pages can be stored.
Printing later
You can choose whether faxes are to be printed immediately
from memory or later.
1 Press MENU, 333. The display shows
. Press START/COPY.
2 Use u to select (faxes are printed out as
soon as the paper tray is refilled) or (faxes
are printed out when you want).
3 Press START/COPY and then STOP twice.
Printing from memory
If there is a document in memory the display will show
.
1 Press MEMORY and 3.
2 Press START/COPY. If faxes are stored they will be printed
out.
Sending from memory
You can scan in documents, store them in memory and send
them from memory. When they have been sent, the faxes are
cleared from memory.
1 Place the document to be faxed (maximum of 15 sheets)
loosely in the document feeder, face down.
2 Press MEMORY, 2 and START/COPY.
a If you want to sent the fax immediately, select 1 and
press START/COPY.
b If you want to send the fax later select 2 , and
press START/COPY. Enter the time you want to send it
(within 24 hours, e.g.18 30 for 6.30 pm) and press
START/COPY.
3 Enter the fax number and press START/COPY. The docu-
ment will be scanned and sent.
Canceling
1 Press MEMORY, 4 and START/COPY. The display
shows
2 Press START/COPY to delete the faxes from memory.
If the line is busy, automatic redial is activated.
1 If you wish to cancel automatic redial, press MENU,
774 and then START/COPY.
2 Press START/COPY again to confirm.
D A power failure will clear the faxes from memory.
Broadcast
You can send the fax either to a group you have already stored
or to individual telephone numbers.
1 Place the document to be faxed (maximum of 15 sheets)
loosely in the document feeder, face down.
2 Press MEMORY and 2. The display shows
. Press START/COPY.
a If you want to sent the fax immediately, select 1 and
press START/COPY.
b If you want to send the fax later select 2 and
press START/COPY. Enter the time you want to send it
(within 24 hours, e.g. 18 30 for 6.30 pm) and press
START/COPY.
3 The display shows: . Enter the
recipients:
a If you want to sent the fax to a group, use u to select
and press START/COPY. Use u to select the
group. You can also use the digit keys to select a group.
b If you want to send the fax to specific telephone numbers,
use u to select and press START/
COPY. Enter the telephone number and press START/
COPY. If you want to enter further numbers, use u
to select and enter the press START/
COPY to confirm. When you have finished adding num-
bers, press .
4 Finally, press START/COPY. The document will be
scanned and automatically sent.
Broadcast list
The broadcast list contains the numbers of all the addresses in
a broadcast (up to 50 telephone numbers).
1 Press MENU and 664. The display shows
.
2 Press START/COPY. The list will be printed out.
Clearing memory
With this function you can delete faxes or documents from
memory.
1 Press MEMORY, 4 and START/COPY. The display
shows
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips Laserfax 725 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips Laserfax 725 in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips Laserfax 725

Philips Laserfax 725 User Manual - German - 36 pages

Philips Laserfax 725 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info