53702

Philips ipf176 Manual

17
Zoom out
Zoom in
Previous page
1/44
Next page
17
Die Faxweiche
The intelligent fax switch enables you to phone and fax
from the same telephone connection and use additional
devices. The fax switch separates fax and voice messages.
For example, it can receive fax messages silently, i.e.
without ringing to avoid causing a disturbance.
The operating modes S and M for day and night
operation allow you to decide on different modes during
the day and at night, how often the machine should ring
prior to receipt of faxes or before the answering machine is
turned on.
Example:
During daytime it is assumed that calls should ring. After a
set time the fax reception is turned on or messages can be
left on the (internal or external) answering machine. At
night it is assumed that disturbances are minimised. Faxes
are then received silently and calls ring more quietly.
You may change-over the operating mode between S and
M of your fax machine automatically using the timer
function U. The integral clock ensures that your machine
is changed over at 10 pm to M and at 6 am to S. Of
course you may adjust these times to suit your own
requirements. The display allows you to check the current
operating status. You change-over between S and M by
briefly pressing the key S until the display shows the
required symbol.
Setting the mode
SMSM
SMSM
SM
with built-in answering device
Display Possible settings
0, 1, 2, 3, 4, 5, 6,
7, 5/2
FAX RINGS:
0, 1, 2, 3, 4, 5,
MANUAL RECEPTION
Low, Medium,
High
ON, OFF
1 Select function 31 (Day) by pressing MENU and numbers
3 and 1. Confirm with OK.
2 Select number of rings with </> before your answering
device will be activated.
TAM RINGS: 5/2
3 Confirm your entry with OK.
4 Now enter the number of ringing signals, after which the
automatic fax-switch should accept the call and separate
faxes from voice messages. Although the caller will continue
to hear slightly different ringing tones after this time,
charges will already accrue.
FAX RINGS: 5
5 Confirm your entry with OK.
6 Using </>, determine the ringer volume when receiving a
call. Press OK.
RINGER VOL.:HIGH
7 Select with </> if the caller should be heard while leaving
a message.
LISTEN-IN: ON
8 Confirm with OK.
9 To activate mode M select MENU 32 (Night) and
repeat steps 2 to 8.
without built-in answering machine
Display Possible settings
TOTAL RINGS:
0, 1, 2, 3, 4, 5,
6, 7
FAX RINGS:
0, 1, 2, 3, 4, 5,
MANUAL RECEPTION
RINGER VOL.:
Low, Medium,
High
1 Select function 31 (Day) by pressing MENU and numbers
3 and 1. Confirm with OK.
2 Using </>, set the total number of rings before the fax
reception commences.
TOTAL RINGS: 5
3 Confirm your entry with OK.
4 Now enter the number of ringing signals after which the
fax-switch should accept the call and separate faxes from
voice messages. Although the caller will continue to hear
slightly different ringing tones after this time, charges will
already accrue.
FAX RINGS: 5
5 Confirm your entry with OK.
6 Using </>, determine the ringer volume when receiving a
call. Press OK.
RINGER VOL.:HIGH
7 Confirm with OK.
8 To activate mode M select MENU 32 (Night) and repeat
steps 2 to 7.
4 Fax switch
TAM RINGS:
LISTEN-IN:
RINGER VOL.:
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips ipf176 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips ipf176 in the language / languages: English as an attachment in your email.

The manual is 11,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info