598010
18
Zoom out
Zoom in
Previous page
1/27
Next page
17
4 Select and adjust the following settings:
[Menu language] : Selects the on-
screen display menu language.
[Audio] : Selects audio language for
video.
[Subtitle] : Selects subtitle language for
video.
[Disc Menu] : Selects menu language
for video disc.
[Parental Control] : Restricts access to
discs that are recorded with ratings. To
play all discs irrespective of the rating,
select level ‘8’.
[Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
[Auto Subtitle Shift] : Enables or
disables shift subtitle. If enabled,
it adjusts the subtitle position
automatically to t the TV screen.
[Change Password] : Sets or changes
a PIN code to play a restricted disc.
Enter ‘0000’ if you do not have a PIN
or if you have forgotten your PIN.
[Display Panel] : Changes the
brightness of the display panel.
[Auto Standby] : Enables or disables
auto standby. If enabled, the home
theater switches to standby after 30
minutes of inactivity (for example, in
pause or stop mode).
[VCD PBC] : Displays or skips the
content menu for VCD and SVCD
discs.
[Sleep Timer] : Sets a sleep timer to
switch the home theater to standby
after a specic time.
5 Press OK to conrm your choice.
Note
If your preferred disc language is not available,
you can select [Other] from the list and enter
the 4-digit language code which can be found
at the back of this manual.
If you select a language that is not available
on a disc, the home theater uses the default
language of the disc.
[View Network Settings] : Displays
the current network settings.
5 Press OK to conrm your choice.
Set up EasyLink
1 Press (Home).
2 Select [Setup], then press OK.
3 Select [EasyLink], then press OK.
4 Select and adjust the following settings:
[EasyLink] : Enables or disables
EasyLink.
[One Touch Play] : Enables or disables
One Touch Play.
If enabled, you can use the remote
control to start disc play in the
home theater and the TV switches
automatically to the correct channel.
[One Touch Standby] : Enables or
disables One Touch Standby.
If enabled, the home theater can
be switched off to standby by a
remote control from the TV or other
connected HDMI CEC devices.
[System Audio Control] : Enables or
disables System audio control.
If enabled, follow the instructions on
the TV to map the connected devices
correctly to the audio connectors of
the home theater. The home theater
switches automatically to the audio
source of the connected device.
[Audio Input Mapping] : Updates audio
input mapping if there are new devices
connected.
5 Press OK to conrm your choice.
Note
The connected devices must be connected
through HDMI and switched on.
Change preference settings
1 Press (Home).
2 Select [Setup], then press OK.
3 Select [Preference], then press OK.
Engli s h
EN
18


Need help? Post your question in this forum.

Forumrules
1

Forum

philips-hts3560

Reset search

  • At times sometimes some speakers do not operate.what causes that? Submitted on 9-8-2021 at 22:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HTS3560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HTS3560 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips HTS3560

Philips HTS3560 Quick start guide - English - 8 pages

Philips HTS3560 User Manual - German - 29 pages

Philips HTS3560 Quick start guide - Dutch - 8 pages

Philips HTS3560 User Manual - Dutch - 29 pages

Philips HTS3560 User Manual - French - 29 pages

Philips HTS3560 User Manual - Portuguese - 29 pages

Philips HTS3560 User Manual - Spanish - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info