531637

Philips HTS3261 Manual

35
Zoom out
Zoom in
Previous page
1/48
Next page
HTS3261
HTS3271
Register your product and get support at
www.philips.com/welcome
3
English
8 Change settings 34
Picture 34
Sound 35
Language 35
Parental control 36
Energy saving 36
Apply factory settings 37
9 Update software 37
Check software version 37
Update software through the Internet 37
Update software through USB 38
10 Product specications 39
11 Troubleshooting 42
12 Index 44
Contents
1 Using help 4
Navigate the onscreen help 4
2 Help and support 5
Update your onscreen help 5
FAQs 6
Contact Philips 6
3 Notice 6
Open source software 6
Trademarks 7
4 Important 8
Safety 8
Care for your product 8
Care of the environment 9
3D health warning 9
5 Your home theater 10
Main unit 10
Remote control 10
6 Connect your home theater 13
Speakers 13
Connectors 14
Connect to TV 15
Connect audio from TV and other devices 16
Computers and the Internet 17
7 Use your home theater 19
Choose sound 19
Discs 20
USB storage devices 23
DivX 23
Audio, video, and picture options 24
Radio 25
MP3 player 26
iPod or iPhone 26
Use smartphone 27
Browse PC through DLNA 28
Browse Net TV 31
Rent online video 32
EasyLink 33
EN
4
Navigate the onscreen help
a Yellow button
Access the onscreen help.
b BACK
• Move up in the Contents or Index.
• From the right panel, move to the
Contents on the left panel.
c OK
Display the selected page.
d Navigation buttons
• Up: Scroll up or move to the previous
page.
• Down: Scroll down or move to the
next page.
• Right: Navigate to the right panel or
next index entry.
• Left: Navigate to the left panel or
previous index entry.
e / (Previous/Next)
• : Display the last viewed page in history.
• : Display the next page from history.
1 Using help
Philips is committed to develop products that
contribute to a greener environment. To save
paper and the environment, access the help on
your home theater through the onscreen interface.
The onscreen help contains all the information
that you need to set up your home theater.
However, if you prefer to print the user manual,
download the PDF version from www.philips.com/
support. Follow the instructions on the website to
select your language, and then enter your model
number.
Access the onscreen help by pressing HELP
(yellow button) on your remote control.
The onscreen help has two panels.
• The left panel contains the Contents and
Index. Navigate the Contents or Index to
select a page.
• The right panel contains the content of each
page. Select Related topics for additional
help on the content.
EN
5
English
3 AtthePhilipssupportwebsite,ndyour
product and click on User manuals, and
then locate the User Manual Upgrade
Software.
» Thehelpupdateisavailableasaziple.
4 Savethezipleintherootdirectoryof
yourUSBashdrive.
5 Use the archive utility to extract the help
updateleintherootdirectoryoftheUSB
ashdrive.
» Alenamed‘HTSxxxxeDFU.zip’is
extracted under the UPG_ALL folder
ofyourUSBashdrive,‘xxxx’beingthe
model number of your home theater.
6 DisconnecttheUSBashdrivefromyour
computer.
Step 3: Update onscreen help
Caution
•
BeforeyouconnecttheUSBashdriveto
your home theater, make sure that there is
no disc in the disc compartment, and the disc
compartment is closed.
1 Switch on the TV.
2 ConnecttheUSBashdrivecontainingthe
downloadedletoyourhometheater.
3 Press (Home).
4 Enter 338 on the remote control.
» Follow the instructions on the TV to
conrmtheupdate.Donotswitchoff
the home theater or remove the USB
ashdriveduringtheupdate.
5 DisconnecttheUSBashdrivefromthe
home theater.
Warning
•
If power fails during the update, do not
removetheUSBashdrivefromthehome
theater.
• If an error occurs during the update, retry
the procedure. If the error reoccurs, contact
Philips Consumer Care.
2 Help and support
Downloadasoftwareupdateandndanswersto
many frequently answered questions (FAQs) on
your product at www.philips.com.
Update your onscreen help
Philips continually tries to improve its products.
To make sure that your onscreen help is up to
date with the latest information, update your
home theater with the latest onscreen help.
Download the latest help from www.philips.com/
support.
What you need
• AUSBashdrive,withatleast35MBof
memory.TheUSBashdrivemustbeFAT
or NTFS formatted. Do not use a USB hard
drive.
• A computer with Internet access.
• An archive utility that supports the ZIP
leformat(forexample,WinZip®for
Microsoft®Windows®orStuft®for
Macintosh®).
Step 1: Check the current version of help
Check the current version of onscreen help
installed in your home theater. If the version is
lower than the version available at www.philips.
com/support, download and install the latest
onscreen help.
The last two digits indicate the version of the
onscreen help installed in your home theater.
For example, if the version in the home theater
is‘SubsystemSW:35-00-00-05’,‘05’represents
the version of the onscreen help currently
installed.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Version Info.], and
then press OK.
Step 2: Download the latest onscreen
help
1 ConnectaUSBashdrivetoyour
computer.
2 In your web browser, go to www.philips.
com/support.
EN
6
3 Notice
This section contains the legal and trademark
notices.
Open source software
Philips Electronics Singapore Pte Ltd hereby
offers to deliver, upon request, a copy of the
complete corresponding source code for the
copyrighted open source software packages used
in this product for which such offer is requested
by the respective licenses. This offer is valid up
to three years after product purchase to anyone
in receipt of this information. To obtain source
code, please contact open.source@philips.com.
If you prefer not to use email or if you do not
receiveconrmationreceiptwithinaweekafter
mailing to this email address, please write to
“Open Source Team, Philips Intellectual Property
& Standards, P.O. Box 220, 5600 AE Eindhoven,
The Netherlands”. If you do not receive timely
conrmationofyourletter,pleaseemailtothe
email address above. The texts of the licenses
and acknowledgements for open source
software used in this product are included in the
user manual.
FAQs
If you have a problem, refer to the frequently
asked questions (FAQs) for this home theater at
www.philips.com/support.
If you still need help, contact Philips Consumer
Care in your country.
Warning
•
Do not attempt to repair your home theater
yourself. This may cause severe injury,
irreparable damage to your home theater, or
void your warranty.
Contact Philips
If you contact Philips, you will be asked for the
model and serial number of your product. The
model number and serial number are on the
back or bottom of your product. Note the
numbers before you call Philips:
Model No. __________________________
Serial No. ___________________________
EN
7
English
DivX ,DivXCertied , DivX Plus™ HD and
associated logos are trademarks of DivX, Inc. and
are used under license.
ABOUTDIVXVIDEO:DivX®isadigital
video format created by DivX, Inc. This is an
ofcialDivXCertied®devicethatplaysDivX
video. Visit divx.com for more information and
softwaretoolstoconvertyourlesintoDivX
video.
ABOUTDIVXVIDEO-ON-DEMAND:This
DivXCertied
device must be registered
inordertoplaypurchasedDivXVideo-on-
Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
HDMI,theHDMIlogo,andHigh-Denition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
SDHCLogoisatrademarkofSD-3C,LLC.
CLASS 1
LASER PRODUCT
Trademarks
“Blu-ray3D”and“Blu-ray3D”logoare
trademarksofBlu-rayDiscAssociation.
BONUSVIEW™
‘BDLIVE’and‘BONUSVIEW’aretrademarksof
Blu-rayDiscAssociation.
Java and all other Java trademarks and logos are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and/or
other countries.
Manufactured under license under U.S. Patent
#’s:5,451,942;5,956,674;5,974,380;5,978,762;
6,226,616;6,487,535;7,392,195;7,272,567;
7,333,929;7,212,872&otherU.S.andworldwide
patents issued & pending. DTS and the Symbol
areregisteredtrademarks,&DTS-HD,andDTS-
HD Master Audio | Essential and the DTS logos
are trademarks of DTS, Inc. Product includes
software.
DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby
Laboratories.Dolbyandthedouble-Dsymbol
are trademarks of Dolby Laboratories.
EN
8
• Never place the product or any objects
on power cords or on other electrical
equipment.
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
• Visible and invisible laser radiation when
open. Avoid exposure to beam.
• Do not touch the disc optical lens inside the
disc compartment.
• Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.
Risk of overheating!
• Neverinstallthisproductinaconned
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries if they are exhausted or
if the remote control is not to be used for a
long time.
• Batteries contain chemical substances, they
should be disposed of properly.
Risk of swallowing batteries!
• The product/remote control may contain a
coin type battery, which can be swallowed.
Keep the battery out of reach of children at
all times!
Care for your product
• Do not insert any objects other than discs
into the disc compartment.
• Do not insert warped or cracked discs into
the disc compartment.
• Remove discs from the disc compartment
if you are not using the product for an
extended period of time.
• Useonlymicroberclothtocleanthe
product.
4 Important
Read and understand all instructions before you
use your home theater. If damage is caused by
failure to follow instructions, the warranty does
not apply.
Safety
Risk of electric shock or re!
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
• Never place the product and accessories
nearnakedamesorotherheatsources,
including direct sunlight.
• Never insert objects into the ventilation
slots or other openings on the product.
• Wherethemainsplugoranappliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Disconnect the product from the power
outlet before lightning storms.
• Whenyoudisconnectthepowercord,
always pull the plug, never the cable.
Risk of short circuit or re!
• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Risk of injury or damage to the home theater!
• Forwall-mountableproducts,useonlythe
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
wall mounting that results in accident, injury
or damage.
• For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
onat,levelsurfacesthatcansupportthe
combined weight of the speaker and stand.
EN
9
English
3D health warning
If you or your family has a history of epilepsy
or photosensitive seizures, consult a medical
professionalbeforeexposingyourselftoashing
light sources, rapid image sequences or 3D
viewing.
To avoid discomfort such as dizziness, headache
or disorientation, we recommend not watching
3D for extended periods of time. If you
experience any discomfort, stop watching 3D
and do not immediately engage in any potentially
hazardous activity (for example driving a car)
until your symptoms have disappeared. If
symptoms persist, do not resume watching 3D
withoutconsultingamedicalprofessionalrst.
Parents should monitor their children during 3D
viewing and ensure they do not experience any
discomfortasmentionedabove.Watching3Dis
not recommended for children under six years of
age as their visual system is not fully developed
yet.
Care of the environment
Your product is designed and manufactured with
high quality materials and components, which
can be recycled and reused.
Whenthiscrossed-outwheeledbinsymbolis
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences
for the environmental and human health.
EN
10
Remote control
This section includes an overview of the remote
control.
Overview
Control your home theater with the remote
control.
a (Standby-On)
• Switch the home theater on or to
standby.
• WhenEasyLinkisenabled,press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
b (Home)
Access the home menu.
c Source buttons
• DISC/POP-UP MENU: Access or exit
the disc menu when you play a disc.
• RADIO: Switch to FM radio.
• AUDIO SOURCE: Select an audio
input source.
d TOP MENU
Access the main menu of a video disc.
5 Your home theater
Congratulations on your purchase, and welcome
toPhilips!Tofullybenetfromthesupportthat
Philips offers, register your home theater at www.
philips.com/welcome.
Main unit
a Disc compartment
b (Open/Close)
Open or close the disc compartment, or
eject the disc.
c (Play/Pause)
Start, pause or resume play.
d (Stop)
Stop play.
e (Standby-On)
Switch the home theater on or to standby.
f SOURCE
Select an audio or video source for the
home theater.
g +/- (Volume)
Increase or decrease volume.
h Display panel
EN
11
English
a (Stop) / (Eject/Open/Close)
• Stop play.
• Press and hold for three seconds to
open or close the disc compartment,
or eject the disc.
b (Play)
Start or resume play.
c / (Previous/Next)
• Skip to the previous or next track,
chapterorle.
• In radio mode, select a preset radio
station.
d (Pause)
Pause play.
e / (Fast Backward/Fast Forward)
Search backwards or forward. Press
repeatedly to change the search speed.
a BACK
• Return to a previous menu screen.
• In radio mode, press and hold to erase
the current preset radio stations.
b Navigation buttons
• Navigate menus.
• In radio mode, press left or right to
start auto search.
• In radio mode, press up or down to
tune the radio frequency.
c OPTIONS
Access more play options while playing a
disc or a USB storage device.
• In radio mode, set a radio station.
d OK
Conrmanentryorselection.
EN
12
EasyLink controls
WithEasylink,youcancontrolyourhome
theater and the TV with the following buttons
on your home theater remote control (see
‘EasyLink’onpage33).
• (Standby-On): Press and hold to switch
your home theater, TV and the connected
devices to standby.
• (Play):Whenavideodiscisinthedisc
compartment, wake up the TV from
standby, and then play a disc.
a +/- (Volume)
Increase or decrease volume.
b SOUND SETTINGS
Access or exit sound options.
c (Mute)
Mute or restore volume.
d AUDIO
Select an audio language or channel.
a Alphanumeric buttons
Enter values or letters (using SMS style
entry).
b REPEAT
Select or turn off repeat mode.
c DOCK for iPod
Switch to Philips dock for iPod or iPhone.
d SUBTITLE
Select subtitle language for video.
e Color buttons
SelecttasksoroptionsforBlu-raydiscs.
f HELP
Access the onscreen help.
EN
13
English
Note
•
Surround sound depends on various factors
such as room shape and size, type of wall and
ceiling,windowsandreectivesurfaces,and
speaker acoustics.
Follow these general guidelines, and then set up
your subwoofer.
1 Seating position:
This is the center of your listening area.
2 SPEAKER LEFT (speaker left) and
SPEAKER RIGHT (speaker right) speakers:
Placethe left and right speakers in the front,
and equidistant from the main unit in an
arc, so that the two speakers are at same
distance from your seating position. For
best effect, point the speakers towards
the seating position and place the speakers
close to the ear level (when seated).
3 SUBWOOFER (subwoofer):
Place the subwoofer at least one meter to
the left or right of the TV. Leave about ten
centimeter clearance from the wall.
Connect
Connect your speakers and the subwoofer to
your home theater as described in the quick
start guide.
Setup
Set up your subwoofer through the audio menu.
1 Connect your subwoofer as described in
the quick start guide.
2 Press (Home) on your home theater
remote control, and select [Setup] >
[Audio] > [Subwoofer volume].
3 Change the volume.
6 Connect your home
theater
This section helps you connect your home theater
to a TV and other devices.
For information about the basic connections of
your home theater and accessories, see the quick
start guide. For a comprehensive interactive guide,
see www.connectivityguide.philips.com.
Note
•
Foridenticationandsupplyratings,referto
the type plate at the back or bottom of the
product.
• Before you make or change any connections,
make sure that all devices are disconnected
from the power outlet.
Speakers
Position, connect, and set up your speakers for
best surround sound.
Position
Speaker position plays a critical role in setting up
a surround sound effect.
For best results, place your speakers and the
subwoofer as shown below.
EN
14
a VIDEO OUT-VIDEO
Connect to the composite video input on
the TV.
b AUDIO IN-AUX 1/AUX 2
Connect to an analog audio output on the
TV or an analog device.
c ANTENNA FM 75
Signal input from an antenna, cable or
satellite.
d DOCK for iPod
Connect to a Philips dock for iPod or iPhone.
(Model: Philips DCK3060, sold separately)
e DIGITAL IN-COAXIAL
Connect to a coaxial audio output on the
TV or a digital device.
f DIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.
Rear right
a HDMI OUT (ARC)
Connect to the HDMI input on the TV.
b LAN
Connect to the LAN input on a broadband
modem or router.
c Wi-Fi
ConnecttoaWi-Fidongle(Model:Philips
WUB1110,soldseparately).
d SD CARD-FOR VOD/BD-LIVE ONLY
Slot for SD card. The SD card is used to
rentonlinevideosandaccessBD-Live.
Connectors
Connect other devices to your home theater.
Side right
a (USB)
Audio, video or picture input from a USB
storage device.
b MUSIC iLINK
Audio input from an MP3 player.
Rear left
a AC MAINS
Connect to the power supply.
b SPEAKER RIGHT/SPEAKER LEFT
Connect to the supplied speakers.
SUBWOOFER
Connect to the supplied subwoofer.
Rear center
EN
15
English
Option 2: Connect to TV through HDMI
Best quality video
If your TV is not HDMI ARC compliant, connect
your home theater to the TV through a standard
HDMI connection.
WithastandardHDMIconnection,youneedan
additional audio cable to play the audio from the
TVthroughyourhometheater(see‘Connect
audiofromTVandotherdevices’onpage16).
1 Using a High Speed HDMI cable, connect the
HDMI OUT (ARC) connector on your home
theater to the HDMI connector on the TV.
The HDMI connector on the TV might be
labeled HDMI IN.
2 OnyourTV,turnonHDMI-CEC.For
details, see the TV user manual.
» Whenyouplayadisconyourhome
theater, the video is automatically
displayed on TV and the audio is
automatically played on the home theater.
3 To play audio from TV programs through
your home theater, connect an additional
audiocable(see‘ConnectaudiofromTV
andotherdevices’onpage16).
4 If audio from the TV does not play
automatically on your home theater, set up
theaudiomanually(see‘Setupaudiofor
connecteddevices’onpage17).
Note
•
If your TV has a DVI connector, you can use an
HDMI/DVI adapter to connect to TV.
TV
Connect to TV
Connect your home theater to a TV to watch videos.
You can listen to audio from TV programs through
your home theater speakers. Use the best quality
connection available on your home theater and TV.
Option 1: Connect to TV through HDMI
(ARC)
Best quality video
YourhometheatersupportsHDMIversion1.4-
Audio Return Channel (ARC). If your TV is HDMI
ARC compliant, connect your home theater to the
TV through the HDMI ARC connection for easy
and quick setup.
WithHDMIARC,youdonotneedanadditional
audio cable to play audio from TV through your
home theater.
1 Using a High Speed HDMI cable, connect the
HDMI OUT (ARC) connector on your home
theater to the HDMI ARC connector on the TV.
The HDMI ARC connector on the TV might
be labeled HDMI IN or HDMI. For details on
TV connectors, see the TV user manual.
2 OnyourTV,turnonHDMI-CEC.For
details, see the TV user manual.
» Whenyouplayadisconyourhome
theater, the video is automatically
displayed on TV and the audio is
automatically played on the home theater.
3 If audio from the TV does not play
automatically on your home theater, set up
theaudiomanually(see‘Setupaudiofor
connecteddevices’onpage17).
TV
EN
16
Option 1: Connect audio through a digital
optical cable
Best quality audio
Using an optical cable, connect the OPTICAL
connector on your home theater to the
OPTICAL OUT connector on the TV or other
device.
The digital optical connector might be labeled
SPDIF, SPDIF OUT, or OPTICAL.
Option 2: Connect audio through a digital
coaxial cable
Good quality audio
Using a coaxial cable, connect the COAXIAL
connector on your home theater to the
COAXIAL/DIGITAL OUT connector on the TV
or other device.
The digital coaxial connector might be labeled
DIGITAL AUDIO OUT.
TV
Option 3: Connect to the TV through
composite video
Basic quality video
If your TV does not have HDMI connectors,
connect your home theater to the TV through a
composite connection. A composite connection
doesnotsupporthigh-denitionvideo.
Withacompositeconnection,youneedan
additional audio cable to play the audio from the
TVthroughyourhometheater(see‘Connect
audiofromTVandotherdevices’onpage16).
1 Using a composite video cable, connect the
VIDEO connector on your home theater to
the composite video connector on the TV.
The composite video connector might be
labeled AV IN, VIDEO IN, COMPOSITE,
or BASEBAND.
2 On your TV, switch to the correct video
input.
3 To play audio from TV programs through
your home theater, connect an additional
audiocable(see‘ConnectaudiofromTV
andotherdevices’onpage16).
On your home theater, press SOURCE
repeatedly to select the correct audio input.
Connect audio from TV and
other devices
Play audio from TV or other devices through
your home theater.
Use the best quality connection available on your
TV, home theater, and other devices.
Note
•
The audio connections in this user manual are
only recommendations. You can use other
connections too.
• WhenyourhometheaterandTVare
connected through HDMI ARC, an audio
connection is not required.
TV
EN
17
English
Computers and the Internet
Connect your home theater to your computer
network and the internet, and enjoy:
• Multimedia content streamed from your
computer: Play music, photo, and video
from a computer or other media server
onyournetwork(see‘BrowsePCthrough
DLNA’onpage28).
• Net TV (Not available in China):
Browse Net TV services to access online
information, games, news, music, and other
services(see‘BrowseNetTV’onpage31).
• Software update:Update the home theater
softwarethroughthenetwork(see‘Update
softwarethroughtheInternet’onpage37).
Caution
•
Before you try to connect the home theater to
a computer network, familiarize yourself with
the network router, media server software
and networking principles. If necessary, read
documentation that accompanies the network
components. Philips is not responsible for lost,
damaged, or corrupt data.
Wired connection
Connect your home theater to your router
through a network cable.
What you need
• A network router (with DHCP enabled).
• A network cable (RJ45 straight cable).
• A computer with media server software
installed(see‘Setupmediaserversoftware’
on page 28).
• For Net TV and software update, make sure
that the network router has access to the
Internet,andisnotrestrictedbyrewallsor
other security systems.
Option 3: Connect audio through analog
audio cables
Basic quality audio
Using an analog cable, connect the AUX
connectors on your home theater to the AUDIO
OUT connectors on the TV or other device.
Set up audio for connected devices
Whenyouconnectadevicetoyourhome
theater, check the audio settings.
1 On your TV and other devices, turn on
HDMI-CEC.Fordetails,seetheuser
manual of the TV and the other device.
2 Select‘Amplier’fromtheTVspeakers
menu. For details, see the TV user manual.
3 On your home theater, turn on System
Audio Control, and then map the audio
of the connected device to the correct
connectorsonyourhometheater(see‘Play
audiofromhometheater’onpage33).
IftheconnecteddeviceisnotHDMI-CEC
compliant, press SOURCE repeatedly on your
home theater to select the correct audio input.
VCR
EN
18
Wireless connection
Connect your home theater to your router
through a wireless connection.
What you need
• A network router (with DHCP enabled).
• AWi-Fidongle(Model:PhilipsWUB1110).
• A computer with media server software
installed(see‘Setupmediaserversoftware’
on page 28).
• For Net TV and software update, make sure
that the network router has access to the
Internetandisnotrestrictedbyrewallsor
other security systems.
Set up the wireless network
Connect your home theater to your router as
shown below, and then switch on the devices.
1 Connect the home theater to a network
router through a wireless connection (see
‘Wirelessconnection’onpage18).
2 Turn on your TV, and switch to the correct
source for the home theater.
3 Press (Home).
4 Select [Setup], and then press OK.
5 Select [Network] > [Network Installation]
> [Wireless (Wi-Fi)], and then press OK.
6 Follow the instructions on the TV to
complete the setup.
» The home theater connects to the
internet. If connection fails, select [Retry],
and then press OK.
7 Select [Finish], and then press OK to exit.
Set up the wired network
Connect your home theater to your router as
shown below, and then switch on the devices.
1 Connect the home theater to a network
router through a wired connection (see
‘Wiredconnection’onpage17).
2 Turn on your TV, and switch to the correct
source for the home theater.
3 Press (Home).
4 Select [Setup], and then press OK.
5 Select [Network] > [Network Installation]
> [Wired (Ethernet)], and then press OK.
6 Follow the instructions on the TV to
complete the setup.
» The home theater connects to the
internet. If connection fails, select [Retry],
and then press OK.
7 Select [Finish], and then press OK to exit.
Check wired network settings
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Network] > [View Network
Settings], and then press OK.
» The current network settings are
displayed.
LAN
www
EN
19
English
7 Use your home
theater
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
• Make the necessary connections described
in the quick start guide and the onscreen
help.
• Completetherst-timesetup.First-time
setup appears when you turn on the home
theaterforthersttime.Ifyoudonot
complete the setup, you are prompted
to complete it each time you turn on the
home theater.
• Switch the TV to the correct source for the
home theater.
Choose sound
This section helps you choose the ideal sound for
your video or music.
1 Press SOUND SETTINGS.
2 Press the Navigation buttons (left/ right) to
access the sound options on the display.
Sound settings Description
SOUND Select a sound mode.
SURROUND Select surround sound or
stereo sound.
TREBLE Change the high frequency
output.
MID Change the middle frequency
output.
BASS Change the low frequency
output.
AUD SYNC Delay the audio to match the
video.
3 Select an option, and then press OK.
4 Press BACK to exit.
If you do not press a button within a
minute, the menu exits automatically.
Check wireless network settings
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Network] > [View Wireless
Settings], and then press OK.
» ThecurrentWi-Fisettingsaredisplayed.
Name your home theater
To easily identify your home theater on a
network, name your home theater.
1 Turn on your TV, and switch to the correct
source for the home theater.
2 Press (Home).
3 Select [Setup], and then press OK.
4 Select [Network] > [Name your Product:],
and then press OK.
5 Press the Alphanumeric buttons to enter
the name.
6 Select [Done], and then press OK to exit.
EN
20
Discs
Your home theater can play DVDs, VCDs, CDs,
andBlu-raydiscs.Itcanalsoplaydiscsthatyou’ve
madeathome,suchasCD-Rdiscsofphotosand
music.
What you need
For audio or 2D video:
• Audio and video connection between your
home theater and the TV.
• An audio or a video disc.
For 3D video:
• A 3D TV.
• An HDMI connection between your home
theater and the TV.
• ABlu-ray3Ddisc.
• A pair of 3D glasses that are compatible
with your 3D TV.
Play discs
1 Insert a disc into the home theater.
» Your TV switches to the correct source
and the disc plays automatically.
2 If the disc does not play automatically, press
DISC or select [play Disc] in the home
menu, and then press OK.
3 For a 3D video, put on your 3D glasses.
4 Press the play buttons to control play (see
‘Playbuttons’onpage21).
Note
•
For a 3D video, during search forward or
backward, and in some other play modes, the
video displays in 2D. It returns to 3D display
when you play normally again.
Tip
•
Toavoidickering,changethebrightnessof
thedisplay(see‘Displaypanel’onpage37).
Sound mode
Selectpredenedsoundmodestosuityour
video or music.
1 Press SOUND SETTINGS.
2 Select SOUND, and then press OK.
3 Press the Navigation buttons (up/down) to
select a setting on the display:
• MOVIE: Enjoy a cinematic audio
experience, specially enhanced for movies.
• MUSIC: Recreate the original recording
environment of your music, in the studio
or at a concert.
• ORIGINAL: Experience the original
sound of your movies and music,
without added sound effects.
• NEWS: Hear every word with
optimized speech and clear vocals.
• GAMING: Enjoy thrilling arcade
sounds,idealforaction-packedvideo
games or loud parties.
4 Press OKtoconrm.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1 Press SOUND SETTINGS.
2 Select SURROUND, and then press OK.
3 Press the Navigation buttons (up/down) to
select the following settings:
• AUTO: Surround sound based on the
audio stream.
• DOLBY VS: Dolby Virtual Speaker
technology creates a highly compelling
5.1-channellisteningexperiencefromas
few as two speakers.
• STEREO:Two-channelstereosound.
Ideal for listening to music.
4 Press OKtoconrm.
Equalizer
Change the high frequency (treble), mid frequency
(mid), and low frequency (bass) settings of the
home theater.
1 Press SOUND SETTINGS.
2 Select TREBLE, MID or BASS, and then
press OK.
3 Press the Navigation buttons (up/down) to
change the frequency.
4 Press OKtoconrm.
EN
21
English
Display menu for VCD and SVCD
Display the content menu on VCD and SVCD
discs.
1 Press (Home).
2 Select [Setup] > [Preference], and then
press OK.
3 Select [VCD PBC] > [On], and then press OK.
Note
•
To skip the content menu, select [Off].
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1 Press SOUND SETTINGS.
2 Select AUD SYNC, and then press OK.
3 Press the Navigation buttons (up/down) to
synchronize the audio with the video.
4 Press OKtoconrm.
Bonus View on Blu-ray
OnBlu-raydiscsthatsupporttheBonus
View,enjoyextracontent,suchasadirector’s
commentary, while you watch the main feature.
BonusViewisalsoknownaspicture-in-picture.
1 EnableBonusView(picture-in-picture)in
theBlu-raydiscmenu.
2 Whileyouplaythemainfeature,press
OPTIONS.
» The options menu is displayed.
3 Select [PIP Selection] > [PIP], and then
press OK.
» Depending on the video, PIP option [1]
or [2] is displayed.
» Thepicture-in-picturevideoisdisplayed
in a small window.
4 Select [2nd Audio Language] or [2nd
Subtitle Language], and then press OK.
5 Select the language, and then press OK.
Note
•
To turn off Bonus View, press OPTIONS, select
[PIP Selection] > [Off], and then press OK.
Play buttons
Button Action
Navigation
buttons
Navigate menus.
OK Conrmanentryorselection.
(Play)
Start or resume play.
Pause play.
Stop play.
/
Skip to the previous or next
track,chapterorle.
/
Fast backwards or fast forwards.
Press repeatedly to change the
search speed.
Navigation
buttons (up/
down)
Rotate the picture clockwise or
counter-clockwise.
SUBTITLE Select subtitle language for
video.
DISC Access or exit the disc menu.
AUDIO Select an audio language or
channel.
REPEAT Select or turn off repeat mode.
OPTIONS
Access the advanced options
when you play your audio,
video,ormediales(see‘Audio,
video,andpictureoptions’on
page 24).
ForvideoformatssuchasDivXandWMV:
• To stop play, press .
• To resume the video from where you
stopped, press
(Play).
• To play the video from the start, press OK.
Play 3D discs in 2D mode
If you do not have a 3D TV, watch the 3D disc in
2D mode.
1 Press (Home).
2 Select [Setup] > [Video] > [Watch 3D
video] > [Off].
3 Press OK.
4 PlayyourBlu-ray3Ddisc.
» The 3D video is displayed in 2D.
EN
22
Access BD-Live with an SD card
1 Connect your home theater to the home
networkandinternet.(see‘Computersand
theInternet’onpage17)
2 Insert the SD memory card into the SD
CARD slot on your home theater.
» ThersttimeyouinsertanSDmemory
card, the card is formatted. After formatting,
leave the card in the home theater (see
‘FormatanSDcard’onpage32).
3 Press (Home).
4 Select [Setup], and then press OK.
5 Select [Advanced] > [Local Storage] > [SD
card], and then press OK.
6 SelecttheBD-Liveiconinthediscmenu,
and then press OK.
» BD-Livestartstoload.Theloadingtime
depends on the disc and your internet
connection.
7 Press the Navigation buttonstonavigateBD-
Live, and then press OK to select an item.
Clear memory
If your storage device does not have enough
memoryfortheBD-Livecontent,clearthe
memory on the storage device.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Clear memory], and
then press OK.
» This clears the local memory and deletes
theBD-Livelesthatyoudownloaded
on your storage device.
Disable BD-Live
TorestrictaccesstoBD-Live,turnontheBD-
Live security.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [BD-Live security] >
[On], and then press OK.
» BD-Liveaccessisrestricted.
Note
•
You cannot restrict internet access on
commercialBlu-raydiscs.
BD-Live on Blu-ray
OnBlu-raydiscswithBD-Livecontent,access
additional features, such as internet chats with
the director, the latest movie trailers, games,
wallpaper, and ringtones.
What you need
• aBlu-raydiscwithBD-Livecontent
• an internet connection
• a storage device:
• a USB storage device, with at least 1
GB of memory, or
• an SD memory card of type SDHC
Class 6, with at least 8 GB of memory.
Note
•
BD-Liveservicesvaryfromcountrytocountry,
and depend on the disc.
• WhenyouuseBD-Live,dataonthediscand
home theater are accessed by the content
provider.
Access BD-Live with a USB storage
device
1 Connect your home theater to the home
networkandinternet(see‘Computersand
theInternet’onpage17).
2 Connect the USB storage device to the
home theater.
• The USB storage device is used
tostorethedownloadedBD-Live
content.
3 Press (Home).
4 Select [Setup], and then press OK.
5 Select [Advanced] > [Local Storage] >
[USB], and then press OK.
6 SelecttheBD-Liveiconinthediscmenu,
and then press OK.
» BD-Livestartstoload.Theloadingtime
depends on the disc and your internet
connection.
7 Press the Navigation buttons to navigate
BD-Live,andthenpressOK to select an
item.
EN
23
English
VOD code for DivX
Before you purchase DivX videos and play them
on your home theater, register the home theater
on www.divx.com using the DivX VOD code.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [DivX® VOD Code],
and then press OK.
» The DivX VOD registration code for
your home theater is displayed.
Subtitles
If your video has subtitles in multiple languages,
select a subtitle language.
1 Whileplayingvideo,pressSUBTITLE to
select a language.
Note
•
Makesurethatthesubtitlelehasthesame
nameasthevideole.Forexample,ifthe
videoleisnamed‘movie.avi’,savethesubtitle
leas‘movie.srt’or‘movie.sub’.
• Yourhometheatercanplaysubtitlelesinthe
following formats: .srt, .sub, .txt, .ssa, .ass, smi,
and.sami.Theselesdonotappearinthele
navigation menu.
• If the subtitles do not appear correctly, change
the character set.
Subtitle character set
If the subtitles do not appear correctly, change
the character set that supports the DivX or
RMVB/RM subtitle.
1 Press OPTIONS.
» The options menu is displayed.
2 Press the Navigation buttons to select
[Character Set], and then press OK.
3 Select a character set.
USB storage devices
Enjoy pictures, audio and video on a USB storage
device.
What you need
• A USB storage device that is formatted for
FATorNTFSlesystems,andcomplies
with the Mass Storage Class.
• A USB extension cable, if the USB storage
devicedoesnottintotheconnector.
Note
•
You can use digital cameras connected by USB
iftheycanplaytheleswithoutusingaspecial
computer program.
• ToplayDivXDRM-protectedlesfrom
a USB storage device, connect your home
theater to a TV through an HDMI cable.
Play les
1 Connect the USB storage device to the
home theater.
2 Press (Home).
» The home menu is displayed.
3 Select [browse USB], and then press OK.
» A content browser is displayed.
4 Selectale,andthenpressOK.
5 Press the playback buttons to control play
(see‘Playbuttons’onpage21).
DivX
Play DivX videos from :
• adisc(see‘Discs’onpage20),
• aUSBstoragedevice(see‘USBstorage
devices’onpage23),or
• anonlinevideostore(see‘Rentonline
video’onpage32).
Note
•
ToplayDivXDRMprotectedlesfromadisc,
a USB storage device, or an online video store,
connect your home theater to a TV through
an HDMI cable.
EN
24
Video options
Whilewatchingvideo,selectoptionssuchas
subtitles, audio language, time search, and picture
settings. Depending on the video source, some
options are not available.
1 Press OPTIONS.
» The video options menu is displayed.
2 Press the Navigation buttons and OK to
select and change:
• [Audio Language]: Select audio
language for video.
• [Subtitle Language]: Select subtitle
language for video.
• [Subtitle Shift]: Change the subtitle
position on the screen.
• [Info]: Display information about what
is playing.
• [Character Set]: Select a character set
that supports the DivX subtitle.
• [Time Search]:Skiptoaspecicpart
of the video by entering the time of
the scene.
• [2nd Audio Language]: Select the
secondaudiolanguageforBlu-ray
video.
• [2nd Subtitle Language]: Select the
secondsubtitlelanguageforBlu-ray
video.
• [Titles]:Selectaspecictitle.
• [Chapters]:Selectaspecicchapter.
• [Angle List]: Select a different camera
angle.
• [Menus]: Display the disc menu.
• [PIP Selection]:DisplayPicture-in-
PicturewindowwhenplayingaBlu-ray
disc that supports the Bonus View.
• [Zoom]: Zoom into a video scene or
picture. Press the Navigation buttons
(left/right) to select a zoom factor.
• [Repeat]: Repeat a chapter or title.
• [Repeat A-B]: Mark two points within
a chapter or track to repeat play, or
turn off the repeat mode.
• [Picture Settings]:Selectapredened
color setting.
Europe, India, and Russia
Character
Set
Language
[Standard] English, Albanian, Danish, Dutch, Finnish,
French, Gaelic, German, Italian, Kurdish
(Latin), Norwegian, Portuguese,
Spanish, Swedish and Turkish
[Central
Europe]
Albanian, Croat, Czech, Dutch,
English, German, Hungarian, Irish,
Polish, Romanian, Slovak, Slovene
and Sorbian
[Cyrillic] Bulgarian, Belorussian, English,
Macedonian, Moldavian, Russian,
Serbian and Ukrainian
[Greek] Greek
Asia Pacic and China
Character Set Language
[Standard] Albanian, Danish, Dutch, English,
Finnish, French, Gaelic, German,
Italian, Kurdish (Latin), Norwegian,
Portuguese, Spanish, Swedish, Turkish
[Chinese] SimpliedChinese
[Chinese-
Traditional]
Traditional Chinese
[Korean] English and Korean
Audio, video, and picture
options
Use advanced features when you play audio, video,
ormedialesfromadiscoraUSBstoragedevice.
Audio options
Whileplayingaudio,repeatanaudiotrack,adisc,
or a folder.
1 Press OPTIONS repeatedly to cycle
through the following functions:
• RPT TRACK / RPT FILE: Repeat the
currenttrackorle.
• RPT DISC / RPT FOLDER: Repeat all
the tracks on the disc or the folder.
• RPT RANDOM: Play audio tracks in
random order.
• RPT OFF: Turn off the repeat mode.
EN
25
English
Musical slideshows
Create a musical slideshow to play music and
pictures at the same time.
1 Select a music track, and then press OK.
2 Press BACK, and go to the picture
folder.
3 Select a picture, and then press (Play) to
start the slideshow.
4 Press to stop slideshow.
5 Press again to stop music.
Radio
Listen to FM radio on your home theater, and
store up to 40 radio stations.
What you need
• FM antenna.
Note
•
AM and digital radio are not supported.
• If no stereo signal is detected, you are
prompted to install the radio stations again.
• For the best reception, place the antenna away
from the TV or other sources of radiation.
Tune stations
1 Connect the FM antenna as described in the
Quick start guide.
2 Press RADIO.
» If you have already installed the radio
stations, the last channel that you listened
to is played.
» If you have not installed any radio
stations, the message AUTO INSTALL...
PRESS PLAY appears on the display
panel. Press
(Play).
Picture options
Whileviewingapicture,zoomintothepicture,
rotate it, add animation to a slideshow, and
change the picture settings.
1 Press OPTIONS.
» The picture options menu appears.
2 Press the Navigation buttons and OK to
select and change the following settings:
• [Rotate +90]: Rotate the picture 90
degree clockwise.
• [Rotate -90]: Rotate the picture 90
degreecounter-clockwise.
• [Zoom]: Zoom into a video scene or
picture. Press the Navigation buttons
(left/right) to select a zoom factor.
• [Info]: Display picture information.
• [Duration per slide]: Select the display
speed for each picture in a slide show.
• [Slide Animation]: Select animation for
the slide show.
• [Picture Settings]:Selectapredened
color setting.
• [Repeat]: Repeat a selected folder.
Slideshows
Whileplayingaudio,accessfunfeaturessuchas
picture and musical slideshows.
Picture slideshows
View a slideshow of your pictures stored in your
disc or a USB storage device.
1 Select a picture from a disc or USB storage
device, and then press
(Play).
2 Press OPTIONS.
3 Press Navigation buttons and OK to select
the following settings:
• [Slide Animation]: Select an animation
for the slideshow.
• [Duration per slide]: Select a display
speed for each picture in a slideshow.
4 Press to stop the slideshow.
EN
26
MP3 player
ConnectyourMP3playertoplayyouraudioles
or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
Play music
1 Connect the MP3 player to the home
theater as described in the Quick start
guide.
2 Press AUDIO SOURCE repeatedly until
‘MUSIC I-LINK’appearsonthedisplay
panel.
3 Press the buttons on the MP3 player to
selectandplayaudiolesormusic.
iPod or iPhone
WhenyouconnectaPhilipsdockforiPod/iPhone,
you can use the home theater to play music,
movies and photos from your iPod or iPhone.
What you need
• A Philips dock (Model: Philips DCK3060,
sold separately).
• A yellow composite cable.
Note
•
Charge your iPod/iPhone on the dock while
the home theater is in iPod mode.
Dock your iPod or iPhone
1 Move the slide at the bottom of the dock to
STANDARD, and then connect the dock to
the home theater.
2 Connect the yellow composite cable to the
dock and TV.
3 Switch on the iPod or iPhone, and place it
on the dock.
3 Press the following buttons to listen or to
change radio stations:
Button Action
/ or
Alphanumeric
buttons
Select a preset radio station.
Navigation
buttons (left/
right)
Search for a radio station.
Navigation
buttons (up/
down)
Fine tune a radio frequency.
Press to stop the installation of
radio stations.
BACK
Press and hold to erase the
preset radio station.
OPTIONS
Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
Listen to radio
1 Press RADIO.
• To listen to a preset station, press
or
.
• To search for a radio station, and then
listen, press Navigation buttons (left/
right).
2 Press +/- (Volume) to change the volume.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. Switching the
tuning grid erases all preset radio stations.
1 Press RADIO.
2 Press .
3 Press and hold (Play) to toggle between
50 kHz or 100 kHz.
EN
27
English
Download MyRemote application
Download the Philips application, MyRemote
(MyRemote) to your smartphone. This
application is free.
Note
•
Philips MyRemote is only available for iPhones
and Android smartphones.
1 Tap the App Store (App Store) icon on the
iPhone or the Market (Market) icon on the
Android smartphone.
2 Searchfor‘PhilipsMyRemote’application.
3 Follow the instructions on your smartphone
to download the application.
» The MyRemote (MyRemote) icon is
added to the home screen of your
smartphone.
Access MyRemote application
Access the MyRemote application from your
smartphone, and then identify your home
theater on the home network.
1 Tap MyRemote (MyRemote) on your
smartphone.
» Your home theater and the other
devices on the network are displayed on
your smartphone. A browsing bar with
Devices, Remote, and Source tabs is also
displayed.
2 If your home theater is not found, check the
networkconnection(see‘Computersand
theInternet’onpage17).
Then, tap the Devices (Devices) tab on
your smartphone to search again.
3 Tap the home theater icon on the
smartphone.
» The virtual remote control is displayed
on the smartphone.
4 To exit the application, press the home
button on your smartphone.
Play music
1 DockyouriPodoriPhone(see‘Dockyour
iPodoriPhone’onpage26).
2 Press DOCK for iPod on the home theater
remote control.
3 Browse on the iPod or iPhone screen to
select music tracks.
• To view the playlist on your TV and
use the home theater remote control
to select a track, press DOCK for iPod
again.
Play video and slideshows
1 DockyouriPodoriPhone(see‘Dockyour
iPodoriPhone’onpage26).
2 On the home theater remote control, press
(Home).
3 Select [browse iPod], and then press OK.
4 Switch the TV to the AV/VIDEO source
(corresponding to the yellow composite
cable).
» The TV screen goes blank.
5 Browse on the iPod or iPhone screen to
select videos or photos.
6 Press (Play) to play the videos or photos.
Use smartphone
Turn your iPhone or Android smartphone into
a virtual remote control, or use it to browse the
contents of a disc or USB storage device on your
home theater.
What you need
• An iPhone (iOS 3.1.3 and above) or
Android (Android 2.1 and above)
smartphone.
• A wired or wireless home network.
Before you start
• Connect your home theater to your home
network(see‘ComputersandtheInternet’
on page 17).
• Nameyourhometheater(see‘Nameyour
hometheater’onpage19).
• Connect your smartphone to the same
home network. For details, see your
smartphone user manual.
EN
28
Browse PC through DLNA
Whenyouconnectyourhometheatertoyour
home network, you can enjoy music, photo, and
video stored on a computer or other media
server on the network.
What you need
• A wired or wireless home network,
connected with a Universal Plug and Play
(uPnP) router.
• A Philips wireless USB adapter or a LAN
cable to connect your home theater to your
home network.
• A media server such as:
• PCrunningWindowsMediaPlayer11
orhigher;or
• Mac running Twonky Media Server.
Note
•
For help to use other media servers, such as
TVersity, see the web site of the media server.
Set up media server software
To enable media sharing, set up the media server
software.
Before you start
• Connect your home theater to your home
network(see‘ComputersandtheInternet’
on page 17).
• Connect your computer to the same home
network.
• MakesurethatyourPCrewallallowsyou
torunWindowsMediaPlayerprograms.
• Switch on your computer and the router.
Microsoft Windows Media Player 11
Note
•
Depending on your version of Microsoft
Windows,thescreensmightlookdifferentto
the following screens.
1 StartWindowsMediaPlayeronyourPC.
2 Click the Library tab, and then select Media
Sharing.
Use your smartphone as a remote control
The virtual remote control is displayed in multiple
screens on the smartphone. To access the buttons,
swipe the smartphone screen to the left or right.
Only the control buttons that are relevant to the
play mode are enabled on your smartphone. For
example, if you play pictures, only the remote
control buttons that are used to control the
pictures are enabled. However, if you play a video,
additional buttons, such as SUBTITLE and TOP
MENU, are enabled on your smartphone.
1 Launch the application on your smartphone
(see‘AccessMyRemoteapplication’onpage
27).
» Depending on the play mode, the
relevant remote control buttons are
enabled.
2 If the remote control buttons do not
appear, tap the Remote (Remote) tab on
your smartphone.
3 Swipe to the left or right screen to access
more buttons.
Note
•
Some control functions are not available on
smartphones.
Browse a disc or USB storage device
Browse a disc or USB storage device from
your smartphone, and play an audio, video, or
multimediale.
1 Launch the remote control application on
yoursmartphone(see‘AccessMyRemote
application’onpage27).
2 Load a data disc or connect a USB storage
device into your home theater.
3 On your smartphone, tap the Source
(Source) tab, and then select DISC (DISC)
or USB (USB).
» The folders in your disc or USB storage
device are displayed.
4 Select a folder to browse, and then select a
letoplay.
» The relevant remote control buttons are
enabled on your smartphone.
5 To access the remote control while you
browse the contents, tap the Remote
(Remote) tab on your smartphone.
EN
29
English
7 Select My folders and those of others I can
access, and then click Add.
8 Follow the onscreen instructions to add the
otherfoldersthatcontainyourmediales.
Microsoft Windows Media Player 12
Note
•
Depending on your version of Microsoft
Windows,thescreensmightlookdifferentto
the following screens.
1 StartWindowsMediaPlayeronyourPC.
2 InWindowsMediaPlayer,clicktheStream
tab, and then select Turn on media
streaming.
» The Media streaming options screen is
displayed.
3 Click Turn on media streaming.
3 ThersttimeyouselectMedia Sharing on
yourPC,apop-upscreenappears.Check
the Share my media box and click OK.
» The Media Sharing screen is displayed.
4 In the Media Sharing screen, make sure that
you see a device marked as Unknown Device.
» Ifyoudon’tseeanunknowndevice
after a minute or so, check that your PC
rewallisnotblockingtheconnection..
5 Select the unknown device and click Allow.
» A green tick appears next to the device.
6 Bydefault,WindowsMediaPlayershares
from these folders: My Music, My Pictures,
and My Videos.Ifyourlesareinother
folders, select Library > Add to Library.
» The Add to Library screen is displayed.
» If necessary, select Advanced options to
display a list of monitored folders.
EN
30
Macintosh OS X Twonky Media (v4.4.2)
Note
•
Depending on which version of the Mac
operating system you use, your screens might
look different to the following screens.
1 Visit http://www.twonkymedia.com to
purchase the software, or download a free
30-daytrialtoyourMacintosh.
2 Start Twonky Media on the Macintosh.
3 In the Twonky Media Server screen, select
Basic Setup and First Steps.
» The First steps screen is displayed.
4 Type a name for your media server, and
then click Save changes.
5 Back in the Twonky Media screen, select
Basic Setup and Sharing.
» The Sharing screen is displayed.
6 Browse and select folders to share, and
then select Save Changes.
» Your Macintosh rescans the folders
automatically so that they are ready to
share.
» YoureturntoWindowsMediaPlayer
screen.
4 Click the Stream tab and select More
streaming options.
» The Media streaming options screen is
displayed.
5 Make sure that you see a media program in
the Local network screen.
» Ifyoudon’tseeamediaprogram,check
thatyourPCrewallisnotblockingthe
connection.
6 Select the media program and click Allowed.
» A green arrow appears next to the
media program.
7 Bydefault,WindowsMediaPlayershares
from these folders: My Music, My Pictures,
and My Videos.Ifyourlesareinother
folders, click the Organize tab and select
Manage libraries > Music.
» The Music Library Locations screen is
displayed.
Follow the onscreen instructions to add the
otherfoldersthatcontainyourmediales.
EN
31
English
4 Press the Navigation buttons to select
App Gallery (App Gallery) or Internet
(Internet), and then press OK.
• Access App Gallery (App Gallery) to
add more Apps to your screen.
• Access Internet (Internet) to browse
the Internet.
5 Press BACK to return to the previous
page, or press
(Home) to exit.
Browse internet
1 Press the Navigation buttons to select
Internet (Internet) from the Net TV home
page, and then press OK.
2 Select the address bar, and then press the
Alphanumeric buttons to enter the URL of
the website.
• To clear the text in the address bar,
press
BACK.
• To display the onscreen keyboard,
follow the instructions on the screen.
3 After you enter the URL, press the
Navigation buttons to select the arrow
next to the address bar, and then press OK
toconrm.
4 Whilebrowsinginternet,press
OPTIONS to access the address bar,
shortcut keys and other advanced options.
5 Press BACK to return to the previous
page, or press
(Home) to exit.
Clear browsing history
Clear the browsing history to remove passwords,
cookies, and browsing data from your home
theater.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Network] > [Clear Net TV
Memory], and then press OK.
Play les from your PC
Note
•
Before you play multimedia content from the
computer, make sure that the home theater
is connected to the home network, and the
media server software is properly set up.
1 Switch your TV to the correct HDMI source
for your home theater.
2 Press (Home).
» The home menu is displayed.
3 Select [browse PC], and then press OK.
» A content browser is displayed.
4 Selectale,andthenpressOK.
5 Press the playback buttons to control play.
Browse Net TV
Not available in China
Use Net TV to access variety of internet
applications and specially adapted internet
websites.
For interactive discussions on Net TV services, visit
the Net TV forum at www.supportforum.philips.
com
Note
•
Koninklijke Philips Electronics N.V. bears no
responsibility for content provided by Net TV
service providers.
Access Net TV
1 Connect your home theater to a home
networkandtheInternet(see‘Computers
andtheInternet’onpage17).
2 Press (Home).
» The home menu is displayed.
3 Select [browse Net TV], and then press
OK.
» The Net TV home page is displayed. The
rsttimeyouaccessNetTV,followthe
onscreen instructions to agree to the
terms and conditions, and then register
with Club Philips.
EN
32
Rent and play online video
1 Connect your home theater to the home
networkandinternet(see‘Computersand
theInternet’onpage17).
2 Press (Home).
3 Select [browse Net TV], and then press
OK.
» The online services available in your
country are displayed.
4 Press the Navigation buttons to go to a
video store, and then press OK.
5 If prompted, follow the video store
instructions to register or log in to an
account.
» You see an option to rent videos.
» If you have rented videos and are still
within the rental period, you also see an
option to watch the videos.
6 Follow the video store instructions to rent
or watch a video.
• The video is downloaded to your SD
memory card. You can watch it now or
at any time within the rental period.
• Whenyouhavedownloadedavideo
to your card, you can watch it only on
yourhometheater.Youcan’tmovethe
card and watch it on another device.
• If you move the card and format it
in another device, your downloaded
video is erased. Download your video
again before you watch.
7 Press the play buttons on your remote
control to play, pause, search, or stop the
video.
Rent online video
Not available in China
Rent videos from online stores, through your
home theater. You can watch them right away or
later.
Many online video stores offer a huge choice of
video, with different rental prices, periods, and
conditions. For some stores, you must create an
account before you can rent.
What you need
• Ahigh-speedinternetconnectiontothe
home theater.
• An HDMI connection between your home
theater and TV.
• An SD memory card of type SDHC Class 6,
with at least 8 GB of memory.
Format an SD card
BeforeyoudownloadanyonlinevideoorBD-
Live content, your SD card must be in the SD
card slot of your home theater, and formatted.
1 Switch your TV to the correct HDMI source
for your home theater.
2 Insert the SD memory card into the SD
CARD slot on your home theater.
3 Follow the onscreen instructions to format
the card.
» Any content on the card is erased during
formatting.
4 After formatting, leave the card in the SD
CARD slot.
EN
33
English
One-touch play
IfyouenableOne-touchplay,theTV
automatically switches to the correct channel
when you play a disc in your home theater.
One-touch standby
Whenyoupressandhold
(Standby) on the
remote control, the home theater and all the
connectedHDMI-CECdevices(thatsupport
one-touchstandby)switchtothestandbymode.
Ifone-touchstandbyisenabledonyourhome
theater, you can switch to standby with the
remotecontroloftheTVorotherHDMI-CEC
devices.
System Audio Control
Whenyouplayadevicethathasitsaudio
output routed to the home theater, the home
theater switches to the corresponding audio
source automatically.
Touseone-touchaudio,turnonSystemAudio
Control and follow the instructions on the TV
to map connected devices to the audio input
connectors of the home theater.
Audio Input Mapping
Whenyouconnectanewdevicetoyourhome
theater, map the device to the audio input
connector(see‘Playaudiofromhometheater’
on page 33).
Play audio from home theater
Play the audio from a connected device through
your home theater.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [EasyLink] > [System Audio
Control] > [On], and then press OK.
• To play the audio from the TV
speakers, select [Off], and skip the
following steps.
4 Select [EasyLink] > [Audio Input Mapping],
and then press OK.
5 Follow the instructions on the TV to map
the audio of the connected device to the
audio inputs on your home theater.
Note
•
If you connect your home theater to the TV
through an HDMI ARC connection, make sure
that the TV audio is mapped to the ARC input
on your home theater.
EasyLink
The home theater supports Philips EasyLink, which
usestheHDMI-CEC(ConsumerElectronics
Control)protocol.EasyLink-compliantdevicesthat
are connected through HDMI can be controlled
by a single remote control.
Philips does not guarantee 100% interoperability
withallHDMI-CECdevices.
What you need
• HDMI-CECcompliantdevices.
• An HDMI connection between the
connected devices.
Switch on
1 On the TV and other connected devices,
turnontheHDMI-CECoperations.For
details, see the manual of the TV or other
devices.
2 Press (Home).
3 Select [Setup], and then press OK.
4 Select [EasyLink] > [EasyLink], and then
press OK.
5 Select [On], and then press OK.
Control devices
Control the home theater and the other
connectedHDMI-CECcompliantdeviceswitha
single remote control.
EN
34
Picture color
Deep Color recreates the natural world on your
TV screen and displays vivid images in over a
billion of colors.
If your TV supports Deep Color and is
connected to your home theater through an
HDMI cable, you can change the Deep Color.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Video] > [HDMI Deep Color], and
then press OK.
4 Select the following options, and then press
OK:
• [Auto]: Automatically select HDMI
Deep Color.
• [On]: View vivid images.
• [Off]:Displaystandard24-bitcolor.
Picture resolution
For HDMI video settings, connect your home
theater to the TV through an HDMI cable.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Video] > [HDMI Video], and then
press OK.
4 Change the HDMI resolution setting, and
then press OK.
Blu-ray 3D video
To play 3D video, connect your home theater to
a 3D TV through an HDMI cable.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Video] > [Watch 3D video] >
[Auto], and then press OK.
Subtitle position
Automatically change the position of the subtitles
totyourTVscreen.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Auto Subtitle Shift]
> [On], and then press OK.
8 Change settings
This section helps you to change the settings of
your home theater.
Caution
•
Mostofthesettingsarealreadycongured
with the best value for your home theater.
Unless you have a reason to change a setting, it
is best to leave it at the default value.
Note
•
You cannot change a setting that is grayed out.
• To return to the previous menu, press
BACK. To exit the menu, press
(Home).
Picture
Change the picture settings to suit your
preferences.
Note
•
The best setting is automatically selected for
the TV. If you change the setting, make sure
that the TV supports the new settings.
Picture settings and format
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Video], and then press OK.
4 Change the following settings, and then
press OK:
• [TV Display]: Picture format.
• [Picture Settings]:Predenedcolor
settings.
EN
35
English
Restore sound mode settings
Restore the equalizer settings of all the sound
modes to the default values.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Audio] > [Default sound settings],
and then press OK.
Language
Select a language for the home menu, audio, and
subtitles.
Home menu
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Menu language], and
then press OK.
4 Select a menu language, and then press OK.
Disc audio
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Audio], and then
press OK.
4 Select an audio language for discs, and then
press OK.
Note
•
If your preferred disc language is not available,
select [Others] from the list, and enter the
4-digitlanguagecodefoundattheendofthis
user manual.
• If you select a language that is not available
on a disc, the home theater uses the default
language of the disc.
Disc subtitle
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Subtitle], and then
press OK.
4 Select a subtitle language for discs, and then
press OK.
Sound
Change the sound settings to suit your preference.
HDMI audio
To hear an HDMI audio output from your TV,
connect your home theater to the TV through
an HDMI cable.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Audio] > [HDMI Audio], and then
press OK.
4 Select the following options, and then press
OK:
• [Bitstream]: Enable bitstream output
over HDMI.
• [Auto]: Automatically select the best
supported audio format.
• [Off]: Disable audio from the TV.
Audio post processing
Toselectapredenedsoundmode,enable
audiopostprocessingatthespeaker(see‘Sound
mode’onpage20).
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Enhanced Audio] >
[On], and then press OK.
Note
•
To play the original audio of the disc, select
[Off].
Night mode
For quiet listening, decrease the volume of loud
sounds when you play discs. Night mode is only
availableforDolby-encodedDVDandBlu-ray
discs.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Audio] > [Night Mode] > [On], and
then press OK.
EN
36
Ratings
Some discs are recorded with ratings according
to age. You can set up your home theater to play
only discs with an age rating lower than your
child’sage.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Parental Control],
and then press OK.
» A message prompts you to enter the
password.
4 Enter the password with the Numeric
buttons.
5 Select an age rating, and then press OK.
• To play all discs irrespective of the
rating, select level 8 or [Off].
Energy saving
Save energy by changing the following settings.
Auto standby
WhenplayingadiscoraUSBstoragedevice,
automatically switch your home theater to standby if:
• it is in pause or stop mode, and
• no button is pressed for 30 minutes.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Auto Standby] >
[On], and then press OK.
Sleep timer
Set timers to switch the home theater to
standbyafteraspeciedtime.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Sleep Timer], and
then press OK.
4 Select the duration of the sleep timer.
» The sleep timer can be set up to 60
minutes. If the sleep timer is set to [Off],
it switches off.
5 Press OK to activate.
» The home theater switches to standby
afterthespeciedtime.
Disc menu
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Disc Menu], and
then press OK.
4 Select a menu language for discs, and then
press OK.
Note
•
If your preferred disc language is not available,
select [Others] from the list, and enter the
4-digitlanguagecodefoundatthetheendof
this user manual.
• If you select a language that is not available
on a disc, the home theater uses the default
language of the disc.
Parental control
Restrict access to discs that are recorded with
ratings.
Password
You can set or change your password to play a
restricted disc.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Change Password],
and then press OK.
» A change password menu is displayed.
4 Follow the instructions on the TV to set or
change password.
• If you do not have a password or you
have forgotten, enter 0000.
5 Press OK.
EN
37
English
9 Update software
To continue to get the best features and support
for your home theater, update the software
regularly. Compare the version of your current
software with the latest version on www.philips.
com/support.
Check software version
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Version Info.], and
then press OK.
» The software version is displayed.
Update software through the
Internet
1 Connect your home theater to the
network. Use a
• wirednetworkconnection(see‘Setup
thewirednetwork’onpage18),or
• a wireless network connection (see
‘Setupthewirelessnetwork’onpage
18).
2 Press (Home).
3 Select [Setup], and then press OK.
4 Select [Advanced] > [Software Update] >
[Network].
» If an upgrade media is detected, you are
prompted to start or cancel the update.
5 FollowtheinstructionontheTVtoconrm
the update.
» Whenthesoftwareupdateiscomplete,
the home theater automatically switches
off and restarts. If it does not, disconnect
the power cord for a few seconds and
then reconnect it.
Note
•
If the home theater cannot connect to the
Philips server, press
(Home), and then
select [Setup] > [Network] > [Network
Installation] to set up the network.
Screen saver
Automatically switch your home theater to
screen saver mode if:
• it is in pause or stop mode, and
• no button is pressed for 10 minutes.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Screen Saver] >
[On], and then press OK.
Display panel
Change the brightness of the home theater
display panel.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Display Panel], and
then press OK.
4 Select the brightness, and then press OK.
Apply factory settings
Reset your home theater to the default settings.
You cannot reset the parental control settings.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Restore default
settings], and then press OK.
4 Select [OK], and then press OK.
EN
38
Step 2: Update the software
Caution
•
BeforeyouconnecttheUSBashdriveto
your home theater, make sure that there is
no disc in the disc compartment, and the disc
compartment is closed.
1 ConnecttheUSBashdrivetoyourhome
theater.
2 Switch your TV to the correct source for
your home theater.
3 Press (Home), and then select [Setup].
4 Select [Advanced] > [Software Update] >
[USB].
5 Follow the instructions on the TV to
conrmtheupdate.
» Whenthesoftwareupdateiscomplete,
the home theater automatically switches
off and restarts. If it does not, disconnect
the power cord for a few seconds, and
then reconnect it.
Note
•
Whenthesoftwareupdateisinprogress,do
not turn off the power or remove the USB
ashdrive.
Update software through USB
What you need
• AUSBashdrive,withatleast75MBof
memory.TheUSBashdrivemustbeFAT
or NTFS formatted. Do not use a USB hard
drive.
• A computer with Internet access.
• An archive utility that supports the ZIP
leformat(forexample,WinZip®for
Microsoft®Windows®orStuft®for
Macintosh®).
Step 1: Download the latest software
1 ConnectaUSBashdrivetoyour
computer.
2 In your web browser, go to www.philips.
com/support.
3 AtthePhilipsSupportwebsite,ndyour
product and locate the Software and
drivers.
» The software update is available as a zip
le.
4 Savethezipleintherootdirectoryof
yourUSBashdrive.
5 Use the archive utility to extract the
softwareupdateleintherootdirectoryof
theUSBashdrive.
» ThelesareextractedundertheUPG_
ALL folderofyourUSBashdrive.
6 DisconnecttheUSBashdrivefromyour
computer.
EN
39
English
File formats
• Audio: .aac, .mka, .mp3, .wma, .wav, .mp4, .m4a
• Video: .avi, .divx, .mp4, .mkv, .asf, .wmv,
.mpg, .mpeg,
• Picture: .jpg, .jpeg, .gif, .png
Audio formats
Your home theater supports the following audio
les.
Extension Container Audio
codec
Bit rate
.mp3 MP3 MP3 32 kbps ~
320 kbps
.wma ASF WMA 64 kbps ~
160 kbps
.aac AAC AAC,HE-
AAC
192 kbps
.wav WAV PCM 1.4 Mbps
.m4a MKV AAC 192 kbps
.mka MKA PCM 27.648
Mbps
.mka MKA Dolby
Digital
640 kbps
.mka MKA DTS core 1.54 Mbps
.mka MKA MPEG 912 kbps
.mka MKA MP3 32 kbps ~
320 kbps
.mka MKA WMA 64 kbps ~
160 kbps
.mka MKA AAC,HE-
AAC
192 kbps
10 Product
specifications
Note
•
Specicationsanddesignaresubjecttochange
without notice.
Region codes
The type plate on the back or bottom of the
home theater shows which regions it supports.
Media formats
• AVCHD,BD,BD-R/BD-RE,BD-Video,
DVD-Video,DVD+R/+RW,DVD-R/-RW,
DVD+R/-RDL,CD-R/CD-RW,AudioCD,
VideoCD/SVCD,Pictureles,MP3media,
WMAmedia,DivXPlusHDmedia,USB
storage device
Country
DVD BD
Europe,
United Kingdom
Korea
Latin America
Australia,
New Zealand
Russia, India
China
AA
AA
CC
CC
Asia Pacific, Taiwan,
EN
40
.mkv les in MKV container
Audio codec Video codec Bit rate
PCM, Dolby
Digital, DTS
core, MPEG,
MP3,WMA,
AAC,HE-
AAC
MPEG 1, MPEG
2
20 Mbps (peak
40 Mbps)
MPEG 4 ASP 10 Mbps max
H.264/AVC
HP@4.1/4.0;
MP@3.2/3.1/3.0
20 Mbps (peak
40 Mbps)
WMV9 20 Mbps
.asf and .wmv les in ASF container
Audio
codec
Video codec Bit rate
PCM,
Dolby
Digital,
MP3,
WMA
MPEG 4 ASP 10 Mbps max
H.264/AVC
HP@4.1/4.0;
MP@3.2/3.1/3.0
20 Mbps (peak
40 Mbps)
WMV9 20 Mbps
.mpg and .mpeg les in PS container
Audio
codec
Video codec Bit rate
PCM,
DTS core,
MPEG,
MP3
MPEG 1,
MPEG 2
20 Mbps (peak 40
Mbps)
MPEG 1,
MPEG 2
20 Mbps (peak 40
Mbps)
.rm and .rmvb les in RM container (Available
only in Asia Pacic and China)
Audio
codec
Video
codec
Bit rate
AAC,
COOK
RV30,
RV40
20 Mbps (peak 40
Mbps)
Video formats
IfyouhaveahighdenitionTV,yourhome
theaterallowsyoutoplayyourvideoleswith:
• Resolution: 1920 x 1080 pixels at
• Frame rate: 6 ~ 30 frames per second.
.avi les in AVI container
Audio
codec
Video codec Bit rate
PCM,
Dolby
Digital,
DTS
core,
MP3,
WMA
DivX 3.11, DivX 4.x,
DivX 5.x, DivX 6.x
10 Mbps max
MPEG 1, MPEG 2 20 Mbps (peak
40 Mbps)
MPEG 4 ASP 10 Mbps max
H.264/AVC
HP@4.1/4.0;
MP@3.2/3.1/3.0
20 Mbps (peak
40 Mbps)
WMV9 20 Mbps
.divx les in AVI container
Audio
codec
Video codec Bit rate
PCM,
Dolby
Digital,
MP3,
WMA
DivX 3.11, DivX 4.x,
DivX 5.x, DivX 6.x
10 Mbps max
MPEG 1, MPEG 2 20 Mbps (peak
40 Mbps)
MPEG 4 ASP 10 Mbps max
.mp4 or .m4v les in MP4 container
Audio
codec
Video codec Bit rate
Dolby
Digital,
MPEG,
MP3,
AAC,HE-
AAC
MPEG 1, MPEG 2 20 Mbps (peak
40 Mbps)
MPEG 4 ASP 10 Mbps max
H.264/AVC
HP@4.1/4.0;
MP@3.2/3.1/3.0
20 Mbps (peak
40 Mbps)
EN
41
English
Main unit
• Power supply:
• Europe/China/Russia/India:220-240
V~, 50 Hz
• LatinAmerica/AsiaPacic:110-127
V/220-240V~,50-60Hz
• Powerconsumption:75W
• Standbypowerconsumption:≤0.5W
• Dimensions(WxHxD):360x58x315mm
• Weight:2.63kg
Subwoofer
• Outputpower:200WRMS(30%THD)
• Impedance: 3 ohm
• Speaker drivers: 165 mm (6.5”) woofer
• Dimensions(WxHxD):123x309x369
mm
• Weight:3.84kg
• Cable length: 3 m
Speakers
• Outputpower:2x100WRMS(30%THD)
• Speaker impedance: 6 ohm
• Speaker drivers: 1 x 76.2 mm (3”) full range
woofer
• Dimensions(WxHxD):95x161x87mm
• Weight:0.55kg/each
• Cable length: 4 m
Remote control batteries
• 2xAAA-R03-1.5V
Laser
• Laser Type (Diode): InGaN/AIGaN (BD),
AIGaInP (DVD/CD)
• Wavelength:405+7nm/-7nm(BD),655
+10nm/-10nm(DVD),790+10nm/-20
nm (CD)
• Outputpower(Max.ratings):20mW(BD),
6mW(DVD),7mW(CD)
Amplier
• Totaloutputpower:400WRMS(30%
THD)
• Frequencyresponse:20Hz-20kHz/±3dB
• Signal-to-noiseratio:>65dB(CCIR)/
(A-weighted)
• Input sensitivity:
• AUX1, AUX2: 2 V
• Music iLink: 1 V
Video
• Signal system: PAL / NTSC
• HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p24
Audio
• S/PDIF Digital audio input:
• Coaxial:IEC60958-3
• Optical: TOSLINK
• Sampling frequency:
• MP3: 32 kHz, 44.1 kHz, 48 kHz
• WMA:44.1kHz,48kHz
• Constant bit rate:
• MP3:32kbps-320kbps
• WMA:48kbps-192kbps
Radio
• Tuning range:
• Europe/Russia/China:FM87.5-108
MHz (50 kHz)
• AsiaPacic/LatinAmerica:FM87.5-108
MHz (50/100 kHz)
• Signal-to-noiseratio:FM55dB
• Frequencyresponse:FM60Hz-12.5kHz/
±3dB
USB
• Compatibility:Hi-SpeedUSB(2.0)
• Class support: USB Mass Storage Class
(MSC)
• File system: FAT16, FAT32, NTFS
• Maximum memory support: < 160 GB
EN
42
Sound
No sound from home theater speakers.
• Connect the audio cable from your home
theater to your TV or other devices. You do
not need a separate audio connection when
the home theater and TV are connected
through an HDMI ARC connection.
• Set up the audio for the connected device
(see‘Setupaudioforconnecteddevices’on
page 17).
• Reset your home theater to its factory
settings(see‘Applyfactorysettings’onpage
37), then switch it off and switch on again.
• On your home theater, press SOURCE
repeatedly to select the correct audio input.
Distorted sound or echo.
• If you play audio from the TV through the
home theater, make sure that the TV is
muted.
Audio and video are not synchronized.
• 1) Press SOUND SETTINGS. 2) Press
the Navigation buttons (left/right) to select
AUD SYNC, and then press OK. 3) Press
the Navigation buttons (up/down) to
synchronize the audio with the video.
Play
Cannot play a disc.
• Clean the disc.
• Make sure that the home theater supports
thetypeofdisc(see‘Mediaformats’on
page 39).
• Make sure that the home theater supports
theregioncodeofthedisc(see‘Region
codes’onpage39).
• IfthediscisaDVD±RWorDVD±Rdisc,
makesurethatitisnalized.
Cannot play a DivX le.
• MakesurethattheDivXleisencoded
accordingtothe‘HomeTheaterProle’
with the DivX encoder.
• MakesurethattheDivXleiscomplete.
DivX subtitles do not display correctly.
• Makesurethatthesubtitlelenameisthe
sameasthemovielename(see‘Subtitles’
on page 23).
• Select the correct character set: 1) Press
OPTIONS. 2) Select [Character Set].
3) Select the supported character set. 4)
Press OK.
11 Troubleshooting
Warning
•
Risk of electric shock. Never remove the
casing of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
support at www.philips.com/welcome.
Main unit
The buttons on the home theater do not work.
• Disconnect the home theater from the
power supply for a few minutes, then
reconnect.
Picture
No picture.
• Make sure that the TV is switched to the
correct source for the home theater.
No picture on a TV connected through HDMI.
• Make sure that you use a High Speed HDMI
cable to connect the home theater and TV.
Some Standard HDMI cables do not display
properly for some images, 3D video, or
Deep Color.
• Make sure that the HDMI cable is not faulty.
If it is faulty, replace it with a new cable.
• Press (Home) and then 731 on the
remote control to restore the default
picture resolution.
• Change the HDMI video setting, or wait for
10secondsforautorecovery(see‘Picture
resolution’onpage34).
Disc does not play high-denition video.
• Makesurethatthedisccontainshigh-
denitionvideo.
• MakesurethattheTVsupportshigh-
denitionvideo.
• Use an HDMI cable to connect to the TV.
EN
43
English
Play 3D video in 2D mode.
• Make sure that your home theater is
connected to a 3D TV through an HDMI
cable.
• MakesurethatthediscisaBlu-ray3Ddisc,
andtheBlu-ray3Dvideooptionison(see
‘Blu-ray3Dvideo’onpage34).
TV screen is black when you play a Blu-ray 3D
video or a DivX copy protected video.
• Make sure that the home theater is
connected to the TV through an HDMI
cable.
• Switch to the correct HDMI source on the
TV.
Cannot download video from an online video
store.
• Make sure that your home theater is
connected to the TV through an HDMI
cable.
• Make sure that the SD card is formatted,
has enough memory to download the
video, and is of type SDHC Class 6.
• Make sure that you have paid for the video,
and it is within the rental period.
• Make sure that the network connection
is good. Use a wired network connection
(see‘Wiredconnection’onpage17)ora
wirelessnetworkconnection(see‘Wireless
connection’onpage18).
• Visit the video store website for more
information.
Network
Wireless network distorted or not found.
• Make sure that the wireless network is
not disturbed by microwave ovens, DECT
phones,orotherneighboringWi-Fidevices.
• If the wireless network does not work
properly, try a wired network installation (see
‘Setupthewirednetwork’onpage18).
Cannot read the contents of a USB storage
device.
• Make sure that the format of the USB storage
device is compatible with the home theater.
• MakesurethatthelesystemontheUSB
storage device is supported by the home
theater.
‘No entry’ or ‘x’ sign appears on the TV.
• The operation is not possible.
EasyLink does not work.
• Make sure that the home theater is
connected to a Philips brand EasyLink TV,
andtheEasyLinkoptionison(see‘EasyLink’
on page 33).
When you switch on the TV, the home theater
automatically switches on.
• This behavior is normal when you are using
PhilipsEasyLink(HDMI-CEC).Tomakethe
home theater work independently, switch
off EasyLink.
Cannot access BD-Live features.
• Make sure that the home theater is
connected to the network. Use a wired
networkconnection(see‘Wiredconnection’
on page 17) or wireless network connection
(see‘Wirelessconnection’onpage18).
• Make sure that the network is set up. Use
awirednetworkinstallation(see‘Setup
thewirednetwork’onpage18)orwireless
networkinstallation(see‘Setupthewireless
network’onpage18).
• MakesurethattheBlu-raydiscsupports
BD-Livefeatures.
• Clearmemorystorage(see‘Clearmemory’
on page 22).
Cannot play video or photos from an iPod or
iPhone on the TV.
• Browse and select videos and photos from
the iPod or iPhone screen, and play them
on your TV.
• Make sure that the iPod or iPhone software
has not been tampered with or illegally
modied.
Cannot view pictures from an iPod or iPhone on
the TV.
• Connect a yellow composite cable to the
iPod dock and the TV.
• Switch the TV to the AV/VIDEO source
(corresponding to the yellow composite cable).
• Press the play button on the iPod or iPhone
to start a slideshow.
• Make sure that the iPod or iPhone software
has not been tampered with or illegally
modied.
EN
44
B
bass 20
BD-Live
BD-Live(SDcard) 22
BD-Live(USB) 22
clear memory 22
disable 22
Blu-ray 20
Bonus View 21
brightness 37
browse
disc 21
from iPhone 28
from iPod 27
Net TV 31
online video stores 32
USB storage device 23
C
care
environment 9
health 9
product 8
character set 23
close disc compartment 10
computer
connect to 17
DLNA 28
media server software 28
computer network 17
connect
audio (analog cable) 17
audio(coaxialcable-digital) 16
audio(opticalcable-digital) 16
audio from TV and other devices 16
computer 28
home network 17
speakers 13
to Internet 17
TV (Composite) 16
TV (HDMI ARC) 15
TV (HDMI) 15
connectors
backconnectors-center 14
backconnectors-left 14
backconnectors-right 14
control
disc play 21
Easylink(HDMI-CEC) 12
main unit 10
parental control 36
radio 25
12 Index
2
2D video 21
3
3D
3D disc in 2D mode 21
3D safety 9
A
advanced
BD-Livesecurity 22
enhanced audio 35
restore default settings 37
software update 37
software version 37
amplier 41
audio
HDMI audio 35
night mode 35
post processing 35
predenedmodes 20
quality 16
settings 35
source 17
specications 41
subwoofer volume 13
audio formats 39
audio input mapping 33
audio language 35
audio options 24
auto standby 36
EN
45
English
F
factory settings 37
FAQs 6
FM antenna 14
format SD card 32
H
HDMI
audio 35
Deep color 34
TV (HDMI ARC) 15
video 34
HDMI-CEC 33
help
navigate 4
read 4
update 5
I
Internet
BD-Live 22
connect to 17
online video stores 32
update home theater software 37
iPod and iPhone
dock your iPod or iPhone 26
music 27
Philips dock 14
video and slideshow 27
L
language
2nd audio language 21
2nd subtitle language 21
audio 35
disc menu 36
onscreen menu 35
subtitle 35
legal notices 6
D
disable
audio post processing 35
BD-Live 22
HDMI-CEC 33
discs
3D disc in 2D mode 21
audio 24
audio language 35
BD-Live 22
Bonus View 21
control buttons 21
DivX 23
menu language 36
options 24
picture 25
picture-in-picture 21
play 20
subtitle 35
synchronize picture and sound 21
time search 24
titles 24
display panel 10
DivX
character set 23
subtitles 23
VOD code 23
DLNA 28
dock your iPod or iPhone 26
E
EasyLink (HDMI-CEC)
audio input mapping 33
control buttons 12
one-touchplay 33
one-touchstandby 33
system audio control 33
eject disc 10
enable
auto standby 36
auto subtitle shift 34
BD-Live 22
HDMI-CEC 33
predenedsoundmode 35
screen saver 37
energy
auto standby 36
brightness 37
screen saver 37
sleep timer 36
EN
46
Net TV 31
online video stores 32
remote control
1010
settings 34
P
parental control
password 36
ratings 36
password 36
PC
connect to 17
DLNA 28
media server software 28
Philips Easylink 33
picture
options 25
rotate 25
settings 34
slideshows 25
troubleshooting 42
zoom 25
picture options 25
picture-in-picture
2nd audio language 21
2nd subtitle language 21
play
discs 20
DivX 23
from PC 31
iPod and iPhone 26
MP3 26
online video 32
radio 41
slideshows 25
troubleshooting 42
USB 23
position
connectors 14
speakers 13
subtitle 34
power options
auto standby 36
brightness 37
screen saver 37
sleep timer 36
preference
audio 35
auto standby 36
auto subtitle shift 34
change password 36
disc menu 36
display panel 37
M
Macintosh Twonky Media 28, 30
main unit
overview 10
specications 41
troubleshooting 42
media formats 39
media server software 28
Microsoft Windows Media Player 11 28
Microsoft Windows Media Player 12 29
MP3
play 26
multimedia content
from disc 20
from online stores 32
from PC 28
from USB storage device 23
N
Net TV
access 31
clear browsing history 31
online video stores 32
watch Net TV page 31
network
home network 17
name a device 19
settings 17
troubleshooting 43
update home theater software 37
Wi-Fi 18
wired connection 17
wireless connection 18
night mode 35
O
one-touch play 33
one-touch standby 33
online video stores
format SD card 32
rent and play video 32
open disc compartment 10
open source software 6
options
audio 24
picture 25
video 24
overview
browse PC 28
connectors 14
HDMI-CEC 33
main unit 10
EN
47
English
sleep timer 36
subtitle language 35
video 34
sleep timer 36
slideshows
animation 25
duration 25
musical 25
picture 25
smartphone
browse disc or USB from smartphone 28
smartphone as remote control 28
software
check current version 37
electronic user manual 5
update 37
sound
bass 20
default sound mode 35
equalizer 20
predenedsoundmode 20
surround sound 20
synchronize picture and sound 21
treble 20
troubleshooting 42
speakers
connect 13
speakers 13
specications 41
surround sound 20
specications 39
subtitle
character set 23
language 35
position 34
subwoofer
specications 41
subwoofer volume 13
synchronize picture and sound 21
system audio control 33
menu language 35
parental control 36
screen saver 37
sleep timer 36
subtitle 35
product specications 39
R
radio
control buttons 25
FM antenna 14
listen to radio 26
specications 41
tune stations 25
tuning grid 26
ratings 36
recycling 9
region codes 39
remote control
batteries 41
overview 10
virtual 27
rent video
format SD card 32
online video stores 32
repeat 24
S
safety
disposal 9
use of the product 8
watching 3D 9
screen saver 37
SD card 32
settings
3D video 34
audio 35
auto standby 36
auto subtitle shift 34
default 37
disc language 36
HDMI audio 35
HDMI video 34
HDMI-CEC 33
menu language 35
parental rating 36
password 36
picture 34
power 36
resolution 34
restore 37
screen saver 37
EN
48
W
wired network
settings 18
wired connection 17
wireless network
settings 19
Wi-Fi 18
Wi-Fidongle 18
wireless connection 18
T
time search 24
titles 24
trademarks 7
treble 20
troubleshooting
connection 42
main unit 42
network 43
picture 42
play 42
serial number 6
sound 42
tuning grid 26
U
update software
check current version 37
electronic user manual 5
from a USB storage device 38
from network 37
USB
format 41
USB storage device
options 24
play 23
specications 41
update home theater software 38
user manual
download 5
navigate 4
read 4
update 5
V
video
HDMI deep color 34
online video 32
picture resolution 34
picture settings 34
synchronize picture and sound 21
video and slideshow 27
VOD code for DivX 23
watch 3D 21
video formats 41
video on demand
format SD card 32
online video stores 32
video options 24
VOD code for DivX 23
EN
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HTS3261 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HTS3261 in the language / languages: English as an attachment in your email.

The manual is 10,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips HTS3261

Philips HTS3261 Quick start guide - English, German - 15 pages

Philips HTS3261 User Manual - German - 54 pages

Philips HTS3261 Quick start guide - Dutch - 15 pages

Philips HTS3261 User Manual - Dutch - 50 pages

Philips HTS3261 Quick start guide - French - 15 pages

Philips HTS3261 User Manual - French - 52 pages

Philips HTS3261 Quick start guide - Portuguese - 15 pages

Philips HTS3261 User Manual - Portuguese - 51 pages

Philips HTS3261 Quick start guide - All languages - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info