Manual Philips HTB5250DG (page 45 of 46) (English)

530558

Zoom out

Zoom in

1/46

www.philips.com/welcome

User manual

Always there to help you

HTB5250DG

HTB5255D

HTB6251D

Question?

Contact

Philips

Question?

Contact

Philips

1EN

Contents

1 Important 2

Safety 2

Care for your product 3

Care of the environment 3

3D health warning 4

2 Your home theater 5

Main unit 5

Remote control 5

Connectors 6

3 Connect and set up 8

Connect speakers 8

Connect to TV 8

Connect digital devices through HDMI 10

Connect audio from TV and other

devices 10

Set up EasyLink (HDMI-CEC control) 11

Connect and set up a home network 12

4 Use your home theater 15

Access the home menu 15

Discs 15

Play audio through Bluetooth 17

Data les 17

USB storage devices 18

Audio, video, and picture options 19

Radio 20

MP3 player 21

iPod or iPhone 21

Smartphone control 21

Browse Smart TV 22

Browse PC through DLNA 24

Choose sound 25

5 Change settings 27

Language settings 27

Picture and video settings 27

Audio settings 27

Parental control settings 28

Display settings 28

Energy saving settings 28

Speaker settings 28

Restore default settings 29

6 Update software 30

Check software version 30

Update software through USB 30

Update software through the Internet 31

7 Productspecications 32

8 Troubleshooting 36

9 Notice 39

Open source software 39

Compliance 39

Trademarks 40

10 Language code 41

11 Index 42

2 EN

1 Important

Read and understand all instructions before you

use your product. If damage is caused by failure

to follow instructions, the warranty does not

apply.

Safety

Riskofelectricshockorre!

• Never expose the product and accessories

to rain or water. Never place liquid

containers, such as vases, near the product.

If liquids are spilt on or into the product,

disconnect it from the power outlet

immediately. Contact Philips Consumer

Care to have the product checked before

use.

• Never place the product and accessories

near naked ames or other heat sources,

including direct sunlight.

• Never insert objects into the ventilation

slots or other openings on the product.

• Where the mains plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

• Batteries (battery pack or batteries

installed) shall not be exposed to excessive

heat such as sunshine, re or the like.

• Disconnect the product from the power

outlet before lightning storms.

• When you disconnect the power cord,

always pull the plug, never the cable.

Riskofshortcircuitorre!

• Before you connect the product to the

power outlet, ensure that the power

voltage matches the value printed on the

back or bottom of the product. Never

connect the product to the power outlet if

the voltage is different.

Riskofinjuryordamagetothehometheater!

• For wall-mountable products, use only the

supplied wall mount bracket. Secure the

wall mount to a wall that can support the

combined weight of the product and the

wall mount. Koninklijke Philips Electronics

N.V. bears no responsibility for improper

wall mounting that results in accident,

injury or damage.

• For speakers with stands, use only the

supplied stands. Secure the stands to the

speakers tightly. Place the assembled stands

on at, level surfaces that can support the

combined weight of the speaker and stand.

• Never place the product or any objects

on power cords or on other electrical

equipment.

• If the product is transported in

temperatures below 5°C, unpack the

product and wait until its temperature

matches room temperature before

connecting it to the power outlet.

• Visible and invisible laser radiation when

open. Avoid exposure to beam.

• Do not touch the disc optical lens inside

the disc compartment.

• Parts of this product can be made of

glass. Handle with care to avoid injury and

damage.

Riskofoverheating!

• Never install this product in a conned

space. Always leave a space of at least four

inches around the product for ventilation.

Ensure curtains or other objects never

cover the ventilation slots on the product.

Riskofcontamination!

• Do not mix batteries (old and new or

carbon and alkaine, etc.).

• Danger of explosion if batteries are

incorrectly replaced. Replace only with the

same or equivalent type.

• Remove batteries if they are exhausted or

if the remote control is not to be used for

a long time.

• Batteries contain chemical substances, they

should be disposed of properly.

3EN

Riskofswallowingbatteries!

• The product/remote control may contain

a coin/button type battery, which can be

swallowed. Keep the battery out of reach

of children at all times! If swallowed, the

battery can cause serious injury or death.

Severe internal burns can occur within two

hours of ingestion.

• If you suspect that a battery has been

swallowed or placed inside any part of the

body, seek immediate medical attention.

• When you change the batteries, always

keep all new and used batteries out of

reach of children. Ensure that the battery

compartment is completely secure after

you replace the battery.

• If the battery compartment cannot be

completely secured, discontinue use of the

product. Keep out of reach of children and

contact the manufacturer.

This is CLASS II apparatus with double

insulation, and no protective earth provided.

Care for your product

• Do not insert any objects other than discs

into the disc compartment.

• Do not insert warped or cracked discs into

the disc compartment.

• Remove discs from the disc compartment

if you are not using the product for an

extended period of time.

• Use only microber cloth to clean the

product.

Care of the environment

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

When this crossed-out wheeled bin symbol is

attached to a product it means that the product

is covered by the European Directive 2002/96/

EC. Please inform yourself about the local

separate collection system for electrical and

electronic products.

Please act according to your local rules and

do not dispose of your old products with your

normal household waste.

Correct disposal of your old product helps to

prevent potential negative consequences for the

environment and human health.

Your product contains batteries covered by the

European Directive 2006/66/EC, which cannot

be disposed with normal household waste.

Please inform yourself about the local rules

on separate collection of batteries because

correct disposal helps to prevent negative

consequences for the environmental and

human health.

4 EN

3D health warning

If you or your family has a history of epilepsy

or photosensitive seizures, consult a medical

professional before exposing yourself to ashing

light sources, rapid image sequences or 3D

viewing.

To avoid discomfort such as dizziness, headache

or disorientation, we recommend not watching

3D for extended periods of time. If you

experience any discomfort, stop watching

3D and do not immediately engage in any

potentially hazardous activity (for example

driving a car) until your symptoms have

disappeared. If symptoms persist, do not resume

watching 3D without consulting a medical

professional rst.

Parents should monitor their children during

3D viewing and ensure they do not experience

any discomfort as mentioned above. Watching

3D is not recommended for children under six

years of age as their visual system is not fully

developed yet.

5EN

2 Your home

theater

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips offers(e.g. notication

of product software upgrade), register your

product at www.philips.com/welcome.

Main unit

This section includes an overview of the main

unit.

a (Open/Close)

Open or close the disc compartment.

b (Play/Pause)

Start, pause or resume play.

c (Stop)

Stop play.

d SOURCE

Select an audio, video, radio source or

Bluetooth mode for the home theater.

e +/- (Volume)

Increase or decrease volume.

f (Standby-On)

Switch the home theater on or to standby.

Remote control

This section includes an overview of the

remote control.

fa b c de

a (Standby-On)

• Switch the home theater on or to

standby.

• When EasyLink is enabled, press

and hold for at least three seconds

to switch all connected HDMI CEC

compliant devices to standby.

b (Home)

Access the home menu.

c Source buttons

• DISC/POP-UP MENU : Switch to disc

source.Access or exit the disc menu

when you play a disc.

• RADIO : Switch to FM radio.

• SOURCE : Select an audio input

source or Bluetooth mode.

d BACK

6 EN

• Return to a previous menu screen.

• In radio mode, press and hold to erase

the current preset radio stations.

e Navigation buttons

• Navigate menus.

• In radio mode, press left or right to

start auto search.

• In radio mode, press up or down to

tune the radio frequency.

f OK

Conrm an entry or selection.

g / (Previous/Next)

• Skip to the previous or next track,

chapter or le.

• In radio mode, select a preset radio

station.

h (Stop) / (Eject/Open/Close)

• Stop play.

• Press and hold for three seconds to

open or close the disc compartment,

or eject the disc.

i / (Fast Backward / Fast Forward)

Search backwards or forward. Press

repeatedly to change the search speed.

j +/- (Volume)

Increase or decrease volume.

k SMART TV

Access online Smart TV service.

l Alphanumeric buttons

Enter values or letters (using SMS style

entry).

m AUDIO

Select an audio language or channel.

n TOP MENU

Access the main menu of a disc.

o OPTIONS

• Access more play options while playing

a disc or a USB storage device.

• In radio mode, set a radio station.

p (Play)

Start or resume play.

q (Pause)

Pause play.

r (Mute)

Mute or restore volume.

Access or exit sound options.

t SUBTITLE

Select subtitle language for video.

u Color buttons

• Select tasks or options for Blu-ray discs.

• Select iPod/iPhone source.

Connectors

This section includes an overview of the

connectors available on your home theater.

Front connectors

a AUDIO-IN

Audio input from an MP3 player (3.5mm

jack).

b iPod/iPhone (USB)

• Audio, video or picture input from a

USB storage device.

• Connect to an iPod or iPhone.

• Access BD-Live

Rear connectors

iPod/iPhone

ij k

7EN

a AC MAINS

Fixed AC power cable.

b SPEAKERS

Connect to the supplied speakers and

subwoofer.

c DIGITAL IN-COAXIAL

Connect to a coaxial audio output on the

TV or a digital device.

d AUDIO IN-AUX

Connect to an analog audio output on the

TV or an analog device.

e HDMI IN1 / HDMI IN2

Connect to the HDMI output on a digital

device.

f (USB)

Slot for a USB storage device. The USB

storage device is used to rent online

videos.

g VIDEO OUT

Connect to the composite video input on

the TV.

h DIGITAL IN-OPTICAL

Connect to an optical audio output on the

TV or a digital device.

i HDMI OUT (ARC)

Connect to the HDMI input on the TV.

j LAN

Connect to the LAN input on a

broadband modem or router.

k FM ANTENNA

Connect to the supplied FM antenna.

8 EN

3 Connect and set

This section helps you connect your home

theater to a TV and other devices, and then set

it up.

For information about the basic connections

of your home theater and accessories, see the

quick start guide.

Note

• For identication and supply ratings, see the type plate

at the back or bottom of the product.

• Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Connect speakers

The speaker cables are color-coded for easy

connection. To connect a speaker to your home

theater, match the color on the speaker cable to

the color on the connector.

Speaker position plays a critical role in setting

up a surround sound effect. For best effect,

position all the speakers towards the seating

position and place them close to your ear level

(seated).

For best results, place your speakers and the

subwoofer as shown below.

* The actual speaker shapes may vary from the

illustration above.

Note

• Surround sound depends on various factors such as

room shape and size, type of wall and ceiling, windows

and reective surfaces, and speaker acoustics.

Follow these general guidelines for speakers

placement.

1 Seating position:

This is the center of your listening area.

2 FRONT LEFT (front left) and FRONT

RIGHT (front right) speakers:

Place the left and right speakers in the

front, and at equal distance from the center

speaker. Make sure that the left, right, and

the center speakers are at equal distance

from your seating position.

3 SUBWOOFER (subwoofer):

Place the subwoofer at least one meter

to the left or right of the TV. Leave about

10-centimeter clearance from the wall.

Connect to TV

Connect your home theater to a TV to watch

videos. You can listen to the TV audio through

your home theater speakers.

FRONT

LEFT

FRONT

RIGHT

SUB

WOOFER

9EN

Use the best quality connection available on

your home theater and TV.

Option 1: Connect to TV through

HDMI (ARC)

Best quality video

Your home theater supports HDMI version

with Audio Return Channel (ARC). If your TV

is HDMI ARC compliant, you can hear the TV

audio through your home theater by using a

single HDMI cable.

1 Using a High Speed HDMI cable, connect

the HDMI OUT (ARC) connector on

your home theater to the HDMI ARC

connector on the TV.

• The HDMI ARC connector on the TV

might be labeled differently. For details,

see the TV user manual.

2 On your TV, turn on HDMI-CEC

operations. For details, see the TV user

manual.

• HDMI-CEC is a feature that enables

CEC compliant devices that are

connected through HDMI to be

controlled by a single remote control,

such as volume control for both the

TV and the home theater. (see 'Set

up EasyLink (HDMI-CEC control)' on

page 11)

3 If you cannot hear the TV audio through

your home theater, set up the audio

manually. (see 'Set up the audio' on page

12)

Option 2: Connect to TV through

standard HDMI

Best quality video

If your TV is not HDMI ARC compliant, connect

your home theater to the TV through a

standard HDMI connection.

1 Using a High Speed HDMI cable, connect

the HDMI OUT (ARC) connector on your

home theater to the HDMI connector on

the TV.

2 Connect an audio cable to hear the TV

audio through your home theater (see

'Connect audio from TV and other devices'

on page 10).

3 On your TV, turn on HDMI-CEC

operations. For details, see the TV user

manual.

• HDMI-CEC is a feature that enables

CEC compliant devices that are

connected through HDMI to be

controlled by a single remote control,

such as volume control for both the

TV and the home theater. (see 'Set

up EasyLink (HDMI-CEC control)' on

page 11)

4 If you cannot hear the TV audio through

your home theater, set up the audio

manually. (see 'Set up the audio' on page

12)

Note

• If your TV has a DVI connector, you can use an HDMI/

DVI adapter to connect to TV. However, some of the

features may not be available.

10 EN

Option 3: Connect to the TV through

composite video

Basic quality video

If your TV does not have HDMI connectors, use

a composite video connection. A composite

connection does not support high-denition

video.

1 Using a composite video cable, connect

the VIDEO OUT connector on your

home theater to the VIDEO IN connector

on the TV.

• The composite video connector might

be labeled AV IN, COMPOSITE, or

BASEBAND.

2 Connect an audio cable to hear the TV

audio through your home theater (see

'Connect audio from TV and other devices'

on page 10).

3 When you watch TV programs, press

SOURCE on your home theater

repeatedly to select the correct audio

input.

4 When you watch videos, switch your TV to

the correct video input. For details, see the

TV user manual.

Connect digital devices

through HDMI

Connect a digital device such as a set-top box,

games console, or camcorder to your home

theater through a single HDMI connection.

When you connect the devices in this way and

play a le or game, the

• video is automatically displayed on your

TV, and

• audio is automatically played on your home

theater.

1 Using a High Speed HDMI cable, connect

the HDMI OUT connector on your digital

device to the HDMI IN 1/2 on your home

theater.

2 Connect your home theater to TV through

HDMI OUT (ARC).

• If the TV is not HDMI CEC compliant,

select the correct video input on your

TV.

3 On the connected device, turn on HDMI-

CEC operations. For details, see the user

manual of the device.

• If you cannot hear the digital device

audio through your home theater, set

up the audio manually. (see 'Set up the

audio' on page 12)

• You can also press SOURCE on your

home theater repeatedly to select the

correct HDMI input.

Connect audio from TV and

other devices

Play audio from TV or other devices through

your home theater speakers.

Use the best quality connection available on

your TV, home theater, and other devices.

Note

• When your home theater and TV are connected

through HDMI ARC, an audio connection is not

required (see 'Option 1: Connect to TV through HDMI

(ARC)' on page 9).

11EN

Option 1: Connect audio through a

digital optical cable

Best quality audio

1 Using an optical cable, connect the

OPTICAL connector on your home

theater to the OPTICAL OUT connector

on the TV or other device.

• The digital optical connector might be

labeled SPDIF or SPDIF OUT.

Option 2: Connect audio through a

digital coaxial cable

Good quality audio

1 Using a coaxial cable, connect the

COAXIAL connector on your home

theater to the COAXIAL/DIGITAL OUT

connector on the TV or other device.

• The digital coaxial connector might be

labeled DIGITAL AUDIO OUT.

Option 3: Connect audio through

analog audio cables

Basic quality audio

1 Using an analog cable, connect the AUX

connectors on your home theater to the

AUDIO OUT connectors on the TV or

other device.

Set up EasyLink (HDMI-CEC

control)

This home theater supports Philips EasyLink,

which uses the HDMI-CEC (Consumer

Electronics Control) protocol. EasyLink-

compliant devices that are connected through

HDMI can be controlled by a single remote

control.

Note

• Depending on the manufacturer, HDMI-CEC is known

by many names. For information on your device, see

the user manual of the device.

• Philips does not guarantee 100% interoperability with

all HDMI-CEC devices.

Before you start

• Connect your home theater to the HDMI-

CEC compliant device through HDMI

connection.

• Make the necessary connections described

in the quick start guide, and then switch

the TV to the correct source for your

home theater.

VCR

12 EN

Enable EasyLink

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [EasyLink] > [EasyLink] > [On] .

4 On your TV and other connected devices,

turn on HDMI-CEC control. For details, see

the user manual of the TV or other devices.

• On your TV, set the audio output to

'Amplier' (instead of TV speakers).

For details, see the TV user manual.

EasyLink controls

With EasyLink, you can control your home

theater, TV, and other connected HDMI-CEC

compliant devices with a single remote control.

• [One Touch Play] (One-touch play): When

a video disc is in the disc compartment,

press

(Play) to wake up the TV from

standby, and then play a disc.

• [One Touch Standby] (One-touch

standby): If one-touch standby is enabled,

your home theater can switch to standby

with the remote control of the TV or other

HDMI-CEC devices.

• [System Audio Control] (System audio

control): If system audio control is enabled,

the audio of the connected device is

output through your home theater

speakers automatically when you play the

device.

• [Audio Input Mapping] (Audio input

mapping):If system audio control does not

work, map the connected device to the

correct audio input connector on your

home theater. (see 'Set up the audio' on

page 12)

Note

• To change the EasyLink control settings, press

(Home), select [Setup] > [EasyLink].

Set up the audio

If you cannot hear the audio output of a

connected device through your home theater

speakers, do the following:

• Check that you have enabled EasyLink

on all the devices, (see 'Set up EasyLink

(HDMI-CEC control)' on page 11) and

• on your TV, set the audio output to

"Amplier" (instead of TV speakers). For

details, see the TV user manual, and

• setup the EasyLink audio control.

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [EasyLink] > [System Audio

Control] > [On].

• To play the audio from the TV

speakers, select [Off], and skip the

following steps.

4 Select [EasyLink] > [Audio Input

Mapping].

5 Follow the onscreen instructions to map

the connected device to the audio inputs

on your home theater.

• If you connect your home theater

to the TV through an HDMI ARC

connection, make sure that the TV

audio is mapped to the ARC input on

your home theater.

Connect and set up a home

network

Connect your home theater to a network

router for a network setup, and enjoy:

• Streamed multimedia content (see 'Browse

PC through DLNA' on page 24)

• Smartphone control

• Smart TV (see 'Browse Smart TV' on page

22)

• BD Live applications (see 'BD-Live on Blu-

ray' on page 16)

• Software update (see 'Update software

through the Internet' on page 31)

13EN

Caution

• Familiarize yourself with the network router, media

server software and networking principles. If necessary,

read documentation that accompanies the network

components. Philips is not responsible for lost, damaged,

or corrupt data.

Before you start

• For Smart TV and software updates, make

sure that the network router has access to

the Internet with high-speed connection

and is not restricted by rewalls or other

security systems.

• Make the necessary connections described

in the quick start guide, and then switch

the TV to the correct source for your

home theater.

Set up the wired network

What you need

• A network cable (RJ45 straight cable).

• A network router (with DHCP enabled).

1 Using a network cable, connect the LAN

connector on your home theater to the

network router.

2 Press (Home).

3 Select [Setup], and then press OK.

LAN

www

4 Select [Network] > [Network

installation] > [Wired (Ethernet)].

5 Follow the onscreen instructions to

complete the setup.

• If connection fails, select [Retry], and

then press OK.

6 Select [Finish], and then press OK to exit.

• To view the network settings, select

[Setup] > [Network] > [View

network settings].

Set up the wireless network

Your home theater has a built-in Wi-Fi for easy

access to a wireless network.

What you need

• A network router (with DHCP enabled).

For best wireless performance, coverage,

and compatibility, use 802.11n router.

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Network] > [Network

installation] > [Wireless (Wi-Fi)], and

then press OK.

4 Follow the onscreen instructions to select

and set up the wireless network.

www

14 EN

• If connection fails, select [Retry], and

then press OK.

5 Select [Finish], and then press OK to exit.

• To view the network settings, select

[Setup] > [Network] > [View

wireless settings].

Personalize the network name

Name your home theater to easily identify it on

your home network.

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Network] > [Name your

Product:].

4 Press the Alphanumeric buttons to enter

the name.

5 Select [Done], and then press OK to exit.

15EN

4 Use your home

theater

This section helps you use the home theater to

play media from a wide range of sources.

Before you start

• Make the necessary connections described

in the quick start guide and the user

manual.

• Complete the rst-time setup. First-time

setup appears when you turn on your

home theater for the rst time or if you do

not complete the setup.

• Switch the TV to the correct source for

your home theater (for example, HDMI,

AV IN).

Access the home menu

The home menu provides easy access to

connected devices, setup and other useful

features in your home theater.

1 Press (Home).

» The home menu is displayed.

2 Press the Navigation buttons and OK to

select the following:

• [play Disc]: Start disc play.

• [browse USB]: Access the USB

content browser.

• [iPod Music]: Access the iPod or

iPhone content browser.

• [Smart TV]: Access Smart TV.

• [browse PC]: Access the computer

content browser.

• [HDMI 1]: Select the digital device

connected to HDMI IN 1 on your

home theater.

• [HDMI 2]: Select the digital device

connected to HDMI IN 2 on your

home theater.

• [Setup]: Access menus to change video,

audio and other settings.

3 Press (Home) to exit.

Discs

Your home theater can play DVDs, VCDs, CDs,

and Blu-ray discs. It can also play discs that

you’ve made at home, such as CD-R discs of

photos, videos, and music.

1 Insert a disc into the home theater.

2 If the disc does not play automatically, press

DISC or select [play Disc] from the home

menu.

3 Use the remote control to control play

(see 'Play buttons' on page 15).

• It is normal to hear a little noise when

you play a Blu-ray disc. This does not

mean that your home theater is faulty.

Play buttons

Button Action

Navigation

buttons

Navigate menus.

Up/Down: Rotate the picture

clockwise or counter-clockwise.

OK Conrm an entry or selection.

(Play) Start or resume play.

Pause play.

/ Stop play.

Press and hold for three seconds

to open or close the disc

compartment.

/ Skip to the previous or next track,

chapter or le.

/ Search fast backwards or forward.

When a video is paused, search

slow backwards or forward.

SUBTITLE Select subtitle language for video.

DISC/

POP-UP

Access or exit the disc menu.

16 EN

Button Action

OPTIONS

Access the advanced options

when you play your audio, video,

or media les (see 'Audio, video,

and picture options' on page 19).

Synchronize picture and sound

If the audio and video are not synchronized,

delay the audio to match the video.

1 Press .

2 Select AUD SYNC, and then press OK.

3 Press the Navigation buttons (up/down)

to synchronize the audio with the video.

4 Press OK to conrm.

Play Blu-ray 3D disc

Your home theater can play Blu-ray 3D video.

Read the 3D health warning before playing a

3D disc.

What you need

• A 3D TV

• A pair of 3D glasses that are compatible

with your 3D TV

• A 3D Blu-ray video

• A high speed HDMI cable

1 Using the high speed HDMI cable, connect

your home theater to a 3D compatible TV.

2 Make sure that the 3D video setting is

enabled. Press

(Home), select [Setup] >

[Video] > [Watch 3D video] > [Auto].

• To play 3D discs in 2D mode, select

[Off].

3 Play a Blu-ray 3D disc and put on the 3D

glasses.

• During video search and in certain play

modes, the video is displayed in 2D.

The video display returns to 3D when

you resume play.

Note

• To avoid ickering, change the brightness of the display.

Bonus View on Blu-ray

On Blu-ray discs that support the Bonus View,

enjoy extra content such as commentaries in a

small screen window. Bonus View is also known

as picture-in-picture.

1 Enable Bonus View in the Blu-ray disc

menu.

2 While you play the movie, press

OPTIONS.

» The options menu is displayed.

3 Select [PIP selection] > [PIP].

• Depending on the video, PIP menu [1]

or [2] is displayed.

• To disable Bonus View, select [Off].

4 Select [2nd audio language] or [2nd

Subtitle Language].

5 Select the language, and then press OK.

BD-Live on Blu-ray

Access additional features on the Blu-ray discs

with BD-Live content, such as internet chats

with the director, the latest movie trailers,

games, wallpaper, and ringtones.

BD-Live services and content vary from disc to

disc.

What you need

• Blu-ray disc with BD-Live content

• a USB storage device, with at least 1 GB of

memory

1 Connect your home theater to a home

network with Internet access (see

'Connect and set up a home network' on

page 12).

2 Connect a USB storage device to the

(USB) connector at the front of your

home theater for BD-Live download.

17EN

3 Press (Home) and select [Setup] >

[Advanced] > [BD-Live security] > [Off].

• To disable BD-Live, select [On].

4 Select the BD-Live icon in the disc menu,

and then press OK.

» BD-Live starts to load. The loading

time depends on the disc and your

internet connection.

5 Press the Navigation buttons to navigate

BD-Live, and then press OK to select an

option.

Note

• To clear the memory on the storage device, press

(Home), select [Setup] > [Advanced] > [Clear

memory].

Play audio through Bluetooth

Through Bluetooth, connect the home theater

with your Bluetooth device (such as an iPad,

iPhone, iPod touch, Android phone, or laptop),

and then you can listen to the audio les stored

on the device through your home theater

speakers.

What you need

• A Bluetooth device which supports

Bluetooth prole A2DP, and with Bluetooth

version as 2.1 + EDR.

• The operational range between the

home theater and a Bluetooth device is

approximately 10 meters (30 feet).

1 Press SOURCE repeatedly to select

Bluetooth mode.

» BT is displayed on the display panel.

2 On the Bluetooth device, switch on

Bluetooth, search for and select the name

of your home theater to start connection

(see the user manual of the Bluetooth

device on how to enable Bluetooth).

• If prompted for a password, enter

"0000".

3 Wait until BT_READY is displayed on the

display panel.

» When the Bluetooth connection

succeeds, BT_READY is displayed on

the display panel.

» If the connection fails, BT on the

display panel is still displayed.

4 Select and play audio les or music on

your Bluetooth device.

• During play, if a call is coming, music

play is paused.

• If music streaming is interrupted, place

the Bluetooth device closer to the

home theater.

5 To exit Bluetooth, select other source.

• When your switch back to Bluetooth

mode, Bluetooth connection remains

active.

Note

• The music streaming may be interrupted by obstacles

between the device and home theater, such as wall,

metallic casing that covers the device, or other devices

nearby that operate in the same frequency.

• If you want to connect your home theater with another

Bluetooth device, press and hold

on the remote

control (or on the main unit) to disable the

currently connected Bluetooth device.

• Philips does not guarantee 100% compatibility with all

Bluetooth devices.

Datales

Your home theater can play pictures, audio and

video les contained in a disc or a USB storage

device. Before you play a le, check that the le

format is supported by your home theater (see

'File formats' on page 32).

1 Play the les from a disc or USB storage

device.

2 To stop play, press .

• To resume the video from where you

stopped, press

(Play).

18 EN

• To play the video from the start, press

OK.

Note

• To play DivX DRM protected les, connect your home

theater to a TV through an HDMI cable.

Subtitles

If your video has subtitles in multiple languages,

select a subtitle language.

Note

• Make sure that the subtitle le has the exact same

name as the video le. For example, if the video le is

named 'movie.avi', name the subtitle le as 'movie.srt'

or 'movie.sub'.

• Your home theater supports the following le formats:

.srt, .sub, .txt, .ssa, .ass, smi, and .sami. If the subtitles do

not appear correctly, change the character set.

1 While playing video, press SUBTITLE to

select a language.

2 For DivX or RMVB/RM videos, if the

subtitles do not appear correctly, continue

the following steps to change the character

set.

3 Press OPTIONS.

» The options menu is displayed.

4 Select [Character set], and then select a

character set that supports the subtitle.

Europe, India, LATAM, and Russia

Character

Set

Language

[Standard] English, Albanian, Danish,

Dutch, Finnish, French, Gaelic,

German, Italian, Kurdish (Latin),

Norwegian, Portuguese, Spanish,

Swedish and Turkish

[Central

Europe]

Albanian, Croat, Czech, Dutch,

English, German, Hungarian, Irish,

Polish, Romanian, Slovak, Slovene

and Sorbian

[Cyrillic] Bulgarian, Belorussian, English,

Macedonian, Moldavian, Russian,

Serbian and Ukrainian

[Greek] Greek

[Baltic] Estonian, Latvian and Lithuanian

VOD code for DivX

Before you purchase DivX videos and play

them on your home theater, register the home

theater on www.divx.com using the DivX VOD

code.

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Advanced] > [DivX

VOD Code].

» The DivX VOD registration code for

your home theater is displayed.

USB storage devices

Enjoy pictures, audio, and video stored on a

USB storage device such as an MP4 player or

digital camera.

What you need

• A USB storage device that is formatted for

FAT or NTFS le systems, and complies

with the Mass Storage Class.

• A media le in one of the supported le

formats (see 'File formats' on page 32).

19EN

Note

• If you use a USB extension cable, USB HUB, or USB

multi-reader, the USB storage device may not be

recognized.

1 Connect a USB storage device to the

(USB) connector on your home theater.

2 Press (Home).

3 Select [browse USB], and then press OK.

» A content browser is displayed.

4 Select a le, and then press OK.

5 Press the play buttons to control play (see

'Play buttons' on page 15).

Audio, video, and picture

options

Use advanced features when you play pictures,

audio and video les from a disc or a USB

storage device.

Audio options

While playing audio, repeat an audio track, a

disc, or a folder.

1 Press OPTIONS repeatedly to cycle

through the following functions:

• Repeat the current track or le.

• Repeat all the tracks on the disc or the

folder.

• Turn off the repeat mode.

Video options

While watching video, select options such

as subtitles, audio language, time search, and

picture settings. Depending on the video source,

some options are not available.

1 Press OPTIONS.

» The video options menu is displayed.

2 Press the Navigation buttons and OK to

select and change:

• [Info]: Display information about what

is playing.

• [Audio language]: Select audio

language for video.

• [Subtitle Language]: Select subtitle

language for video.

• [Subtitle shift]: Change the subtitle

position on the screen.

• [Character set]: Select a character set

that supports the DivX subtitle.

• [Time search]: Skip to a specic part

of the video by entering the time of

the scene.

• [2nd audio language]: Select the

second audio language for Blu-ray

video.

• [2nd Subtitle Language]: Select the

second subtitle language for Blu-ray

video.

• [Titles]: Select a specic title.

• [Chapters]: Select a specic chapter.

• [Angle list]: Select a different camera

angle.

• [Menus]: Display the disc menu.

• [PIP selection]: Display Picture-in-

Picture window when playing a Blu-ray

disc that supports the Bonus View.

• [Zoom]: Zoom into a video scene or

picture. Press the Navigation buttons

(left/right) to select a zoom factor.

• [Repeat]: Repeat a chapter or title.

• [Repeat A-B]: Mark two points within a

chapter or track to repeat play, or turn

off the repeat mode.

• [Picture settings]: Select a predened

color setting.

Picture options

While viewing a picture, zoom into the picture,

rotate it, add animation to a slideshow, and

change the picture settings.

1 Press OPTIONS.

» The picture options menu appears.

2 Press the Navigation buttons and OK to

select and change the following settings:

20 EN

• [Info]: Display picture information.

• [Rotate +90]: Rotate the picture 90

degree clockwise.

• [Rotate -90]: Rotate the picture 90

degree counter-clockwise.

• [Zoom]: Zoom into a video scene or

picture. Press the Navigation buttons

(left/right) to select a zoom factor.

• [Duration per slide]: Select the display

speed for each picture in a slide show.

• [Slide animation]: Select animation for

the slide show.

• [Picture settings]: Select a predened

color setting.

• [Repeat]: Repeat a selected folder.

Musical slideshow

If the picture and audio les are from the same

disc or USB storage device, you can create a

musical slideshow.

1 Select an audio track, and then press OK.

2 Press BACK, and go to the picture

folder.

3 Select a picture, and then press (Play) to

start the slideshow.

4 Press to stop slideshow.

5 Press again to stop music.

Note

• Make sure that the picture and audio formats are

supported by your home theater (see 'File formats' on

page 32).

Radio

Listen to FM radio on your home theater, and

store up to 40 radio stations.

Note

• AM and digital radio are not supported.

• If no stereo signal is detected, you are prompted to

install the radio stations again.

1 Connect the FM antenna to the FM

ANTENNA on your home theater.

• For the best reception, place the

antenna away from your TV or other

sources of radiation.

2 Press RADIO on the remote control to

switch to radio source.

» If you have already installed the radio

stations, the last channel that you

listened to is played.

» If you have not installed any radio

stations, the message AUTO

INSTALL...PRESS PLAY appears on

the display panel. Press

(Play) to

install radio stations.

3 Use the remote control to listen or to

change radio stations.

Play buttons

Button Action

Alphanumeric

buttons

Select a preset radio station.

Navigation

buttons

Left/Right: Search for a radio

station.

Up/Down: Fine tune a radio

frequency.

Press to stop the installation

of radio stations.

BACK Press and hold to erase the

preset radio station.

OPTIONS Manual:

1) Press OPTIONS. 2) Press

/ to select your preset.

3) Press OPTIONS again to

store the radio station.

Automatic: Press and hold

for three seconds to reinstall

the radio stations.

SUBTITLE Toggle between the stereo

and mono sounds.

21EN

Tuning grid

In some countries, you can toggle the FM tuning

grid between 50 kHz and 100 kHz.

1 Press RADIO on the remote control to

switch to radio source.

2 Press .

3 Press and hold (Play) to toggle between

50 kHz or 100 kHz.

MP3 player

Connect a MP3 player to play audio les.

What you need

• An MP3 player.

• A 3.5mm stereo audio cable.

1 Using the 3.5mm stereo audio cable,

connect the MP3 player to the AUDIO-IN

connector on your home theater.

• If you use 6.5mm stereo audio cable,

connect the MP3 player to your

home theater using a 3.5mm - 6.5mm

converter jack.

2 Press SOURCE repeatedly until AUDIO-

IN appears on the display panel.

3 Press the buttons on the MP3 player to

select and play audio les.

iPod or iPhone

Through the home theater, you can play audio

les from your iPod or iPhone.

1 With an iPod/iPhone USB cable, connect

your iPod or iPhone to the iPod/iPhone

(USB) connector at the side panel of your

home theater.

2 Press iPod/iPhone on the home theater

remote control.

• Charge your iPod/iPhone while the

home theater is in iPod/iPhone mode.

3 Browse your iPod or iPhone screen to

select the music.

4 Play the music on your iPod or iPhone.

» The music is heard on your home

theater.

Note

• The USB connector at the back of the home theater is

500mA and not for Apple devices.

• A device with more than 500mA cannot be charged via

the USB connector at the back of the home theater.

Smartphone control

Use your mobile device such as iPhone (iOS

3.1.3 and above), Android phone (2.1 and

above), iPad, or tablet to:

• Control your home theater

• Browse a data disc or USB storage device

• Stream and share content from the devices

on your home network

Before you start

• Connect your home theater, mobile device,

and other DLNA-compatible devices to

the same home network.

• For better video quality, use wired

connection whenever possible.

• Personalize the network name for your

home theater (see 'Personalize the

network name' on page 14).

• Download Philips MyRemote application

on your mobile device.

• For iPhone or iPad, search for the app

in App Store (App Store).

• For Android based phone or tablet,

search for the app in Market (Market).

Control your home theater

1 On the mobile device, access MyRemote

application.

22 EN

2 Select your home theater (by its network

name) from the home screen.

» A browsing bar is displayed at the

bottom of the screen.

• If your home theater is not found,

check the network connection or tap

the Devices tab on your mobile device

to search again.

3 Select one of the following tabs to access

more options.

• To return to the previous screen, press

back button.

Option Action

App

Home

Return to the home screen of your

device.

Media DISC: Browse and play a le stored

on a data disc.

USB: Browse and play a le stored

on a USB storage device.

Remote Access the remote control on your

mobile device. Swipe the screen

to the left or right to access more

buttons. Only the relevant buttons

are enabled on your mobile device.

Some functions such as switch-on

from standby and long press, are not

available on the mobile device.

4 Follow the onscreen instructions to select

an option or complete the set up.

Stream multimedia content

(SimplyShare)

Philips SimplyShare allows you to use your

smartphone to stream multimedia content

(such as pictures, audio and video les), and play

through your home theater or any DLNA-

compatible device in the same home network.

Before you start

• Install a DLNA-compliant media server

application on your mobile device, such as

Twonky Media Server.

• Enable media sharing of les. For details,

check the user manual of the media server

software software.

1 On the mobile device, launch the media

server application. For iPhone or Android

phone, access MyRemote application.

2 From the menu of your mobile device,

select SimplyShare.

» Your home theater and other

devices on the home network are

automatically detected and displayed

on the screen.

3 Select a device on the network.

» The folders in the selected device are

displayed. Depending on the media

server, the folder names may vary.

• If you cannot see the folders, make

sure that you enable media sharing on

the selected device so that the content

is available for sharing.

4 Select a media le to play.

5 From the menu on your mobile device,

select the home theater to stream the

media le to your home theater.

• Some media les may not display

or play due to compatibility issues.

For your home theater, check the

supported le formats.

6 Use your mobile device to control play.

Browse Smart TV

Use Smart TV to access variety of internet

applications and specially adapted internet

websites.

For interactive discussions on Smart TV services,

visit the Smart TV forum at www.supportforum.

philips.com

23EN

Note

• Koninklijke Philips Electronics N.V. bears no

responsibility for content provided by Smart TV service

providers.

1 Connect your home theater to a home

network with high-speed Internet access

(see 'Connect and set up a home network'

on page 12).

2 Press (Home).

3 Select [Smart TV], and then press OK.

4 Follow the onscreen instructions to

conrm the onscreen message.

» The Smart TV home page is displayed.

5 Use the remote control to select

applications and enter text (for example,

web URL, passwords, etc) (see 'Navigate

Smart TV' on page 23).

Navigate Smart TV

Button Action

Navigation

buttons

Select an application or

navigate.

OK Conrm an entry or

selection.

BACK Return to the previous page.

Delete a character in any text

entry box.

Alphanumeric

buttons

Enter characters in the text

entry box.

(Home) Exit Smart TV portal and

return to home menu.

Clear browsing history

Clear the browsing history to remove

passwords, cookies, and browsing data from

your home theater.

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Network] > [Clear Smart TV

memory].

4 Press OK to conrm.

Rent online video

The function is only available in Smart TV

service that has the VOD feature.

Rent videos from online stores, through your

home theater. You can watch them right away

or later.

Many online video stores offer a huge choice of

video, with different rental prices, periods, and

conditions. For some stores, you must create an

account before you can rent.

What you need

• a USB storage device, with at least 8 GB of

memory

1 Connect your home theater to a home

network with high-speed Internet access

(see 'Connect and set up a home network'

on page 12).

2 Insert a blank USB storage device into the

(USB) connector at the back of your

home theater, and follow the onscreen

instructions to format the USB device.

• After formatting, leave the USB storage

device in the

(USB) connector.

• After formatting, the USB storage

device will no longer be compatible

with computers or cameras, unless

formatted again using Linux operating

system.

3 Press (Home).

4 Select [Smart TV], and then press OK.

» The online services available in your

country are displayed.

5 Select a video store, and then press OK.

6 Follow the onscreen instructions to rent

or watch a video. If prompted, enter the

necessary information to register or log in

to the store's account.

» The video is downloaded to your USB

storage device. You can watch it only

on your home theater.

7 Press the playback buttons to control play

(see 'Play buttons' on page 15).

24 EN

• If you cannot play a video, check the

le format to make sure that it is

supported by your home theater (see

'File formats' on page 32).

Browse PC through DLNA

Access and play the pictures, audio and video

les from a computer or media server on the

home network through your home theater.

Before you start

• Install a DLNA-compliant media server

application on your device. Make sure that

you download an application that works

best for you. For example,

• Windows Media Player 11 or higher

for PC

• Twonky Media Server for Mac or PC

• Enable media sharing of les. For ease of

use, we have included the steps for the

following applications:

• Windows Media Player 11 (see

'Microsoft Windows Media Player 11'

on page 24)

• Windows Media Player 12 (see

'Microsoft Windows Media Player 12'

on page 24)

• Twonky Media for Mac (see 'Macintosh

OS X Twonky Media (v4.4.2)' on page

25)

Note

• For additional help on these applications or other

media servers, check the user manual of the media

server software software.

Set up media server software

To enable media sharing, set up the media

server software.

Before you start

• Connect your home theater to a home

network. For better video quality, use wired

connection whenever possible.

• Connect the computer and other DLNA-

compatible devices to the same home

network.

• Make sure that your PC rewall allows

you to run Media Player programs (or

the rewall’s exemption list has the media

server software included).

• Switch on your computer and the router.

Microsoft Windows Media Player 11

1 Start Windows Media Player on your PC.

2 Click the Library tab, and then select

Media Sharing.

3 The rst time you select Media Sharing on

your PC,a pop-up screen appears. Check

the Share my media box and click OK.

» The Media Sharing screen is displayed.

4 In the Media Sharing screen, make sure

that you see a device marked as Unknown

Device.

» If you don't see an unknown device

after a minute or so, check that

your PC rewall is not blocking the

connection.

5 Select the unknown device and click Allow.

» A green tick appears next to the

device.

6 By default, Windows Media Player shares

from these folders: My Music, My Pictures,

and My Videos. If your les are in other

folders, select Library > Add to Library.

» The Add to Library screen is displayed.

• If necessary, select Advanced options

to display a list of monitored folders.

7 Select My folders and those of others I

can access, and then click Add.

8 Follow the onscreen instructions to add

the other folders that contain your media

les.

Microsoft Windows Media Player 12

1 Start Windows Media Player on your PC.

25EN

2 In Windows Media Player, click the Stream

tab, and then select Turn on media

streaming.

» The Media streaming options screen

is displayed.

3 Click Turn on media streaming.

» You return to Windows Media Player

screen.

4 Click the Stream tab and select More

streaming options.

» The Media streaming options screen

is displayed.

5 Make sure that you see a media program

in the Local network screen.

» If you don't see a media program,

check that your PC rewall is not

blocking the connection.

6 Select the media program and click

Allowed.

» A green arrow appears next to the

media program.

7 By default, Windows Media Player shares

from these folders: My Music, My Pictures,

and My Videos. If your les are in other

folders, click the Organize tab and select

Manage libraries > Music.

» The Music Library Locations screen is

displayed.

8 Follow the onscreen instructions to add

the other folders that contain your media

les.

Macintosh OS X Twonky Media (v4.4.2)

1 Visit www.twonkymedia.com to purchase

the software, or download a free 30-day

trial to your Macintosh.

2 Start Twonky Media on the Macintosh.

3 In the Twonky Media Server screen, select

Basic Setup and First Steps.

» The First steps screen is displayed.

4 Type a name for your media server, and

then click Save changes.

5 Back in the Twonky Media screen, select

Basic Setup and Sharing.

» The Sharing screen is displayed.

6 Browse and select folders to share, and

then select Save Changes.

» Your Macintosh rescans the folders

automatically so that they are ready to

share.

PlaylesfromyourPC

Note

• Before you play multimedia content from the computer,

make sure that the home theater is connected to

the home network, and the media server software is

properly set up.

1 Press (Home).

2 Select [browse PC], and then press OK.

» A content browser is displayed.

3 Select a device on the network.

» The folders in the selected device are

displayed. Depending on the media

server, the folder names may vary.

• If you cannot see the folders, check

that you have enabled media sharing

on the selected device so that the

content is available for sharing.

4 Select a le, and then press OK.

• Some media les may not play due

to compatibility issues. Check the le

formats supported by your home

theater.

5 Press the play buttons to control play (see

'Play buttons' on page 15).

Choose sound

This section helps you choose the ideal sound

for your video or music.

1 Press .

26 EN

2 Press the Navigation buttons (left/right) to

access the sound options on the display.

Sound options Description

SURROUND Select surround sound or

stereo sound.

SOUND Select a sound mode.

AUD SYNC Delay the audio to match the

video.

AUTO VOL Reduce sudden changes in

volume, for example, during

TV commercials.

3 Select an option, and then press OK.

4 Press BACK to exit.

• If you do not press a button within a

minute, the menu exits automatically.

Surround sound mode

Experience an immersive audio experience with

surround sound modes.

1 Press .

2 Select SURROUND, and then press OK.

3 Press the Navigation buttons (up/down)

to select a setting from your display:

• AUTO: Surround sound based on the

audio stream.

• VIRTUAL SURROUND: Virtual

Surround.

• STEREO: Two-channel stereo sound.

Ideal for listening to music.

4 Press OK to conrm.

Sound mode

Select predened sound modes to suit your

video or music.

1 Make sure that audio post processing is

enabled at the speakers (see 'Speaker

settings' on page 28).

2 Press .

3 Select SOUND, and then press OK.

4 Press the Navigation buttons (up/down)

to select a setting on the display:

• AUTO: Automatically select a sound

setting based on the sound stream.

• BALANCED: Experience the original

sound of your movies and music,

without added sound effects.

• POWERFUL: Enjoy thrilling arcade

sounds, ideal for action-packed videos

and loud parties.

• BRIGHT: Spice up your dull movies

and music with added sound effects.

• CLEAR: Hear every detail in your

music and clear voices in your movies.

• WARM: Experience spoken words and

music vocals in comfort.

• PERSONAL: Personalize the sound

based on your preferences.

5 Press OK to conrm.

Equalizer

Change the high frequency (treble), mid

frequency (mid), and low frequency (bass)

settings of the home theater.

1 Press .

2 Select SOUND > PERSONAL, and then

press Navigation buttons (right).

3 Press the Navigation buttons (up/down)

to change bass, mid or treble frequency.

4 Press OK to conrm.

Auto volume

Turn on auto volume to reduce sudden changes

in volume, for example, during TV commercials.

1 Press .

2 Select AUTO VOL, and then press OK.

3 Press the Navigation buttons (up/down)

to select ON or OFF.

4 Press OK to conrm.

27EN

5 Change settings

The home theater settings are already

congured for optimal performance. Unless

you have a reason to change a setting, we

recommend that you keep the default setting.

Note

• You cannot change a setting that is grayed out.

• To return to the previous menu, press BACK. To

exit the menu, press

(Home).

Language settings

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Preference], and then press OK.

4 Press the Navigation buttons and OK to

select and change:

• [Menu language]: Select a display

language for menu.

• [Audio]: Select an audio language for

discs.

• [Subtitle]: Select a subtitle language

for discs.

• [Disc menu]: Select a menu language

for discs.

Note

• If your preferred disc language is not available, select

[Others] from the list, and enter the 4-digit language

code found at the end of this user manual (see

'Language code' on page 41).

• If you select a language that is not available on a disc,

the home theater uses the default language of the disc.

Picture and video settings

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Video], and then press OK.

4 Press the Navigation buttons and OK to

select and change:

• [Tv type]: If the video does not appear

correctly, select a TV type (color

system).

• [TV display]: Select a picture format to

t the TV screen.

• [HDMI video]: Select the resolution of

video signal that is output from HDMI

OUT (ARC) on your home theater.

To enjoy the selected resolution,

make sure that your TV supports the

selected resolution.

• [HDMI Deep Color]: Recreate the

natural world on your TV screen by

displaying vivid images using billion

colors. Your home theater must be

connected to a Deep Color enabled

TV through an HDMI cable.

• [Picture settings]: Select pre dened

color settings for the video display.

• [Watch 3D video]: Set HDMI video to

support 3D or 2D video.

Note

• If you change a setting, make sure that the TV supports

the new setting.

Audio settings

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Audio], and then press OK.

4 Press the Navigation buttons and OK to

select and change:

28 EN

• [Night mode]: For quiet listening,

decrease the volume of loud sounds

on your home theater. Night mode

is only available in DVDs and Blu-ray

discs with Dolby Digital, Dolby Digital

Plus, and Dolby True HD soundtracks.

• [HDMI Audio]: Set the HDMI audio

output from your TV, or disable HDMI

audio output from the TV.

• [Default sound settings]: Restore

the equalizer settings of all the sound

modes to the default values.

Parental control settings

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Preference], and then press OK.

4 Press the Navigation buttons and OK to

select and change:

• [Change Password]: Set or change

your password for parental control

access. If you do not have a password

or have forgotten your password, enter

0000.

• [Parental control]: Restrict access

to discs that are recorded with age

ratings. To play all discs, irrespective of

the ratings, select 8 or [Off].

Display settings

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Preference], and then press OK.

4 Press the Navigation buttons and OK to

select and change:

• [Auto subtitle shift]: Enable or disable

automatic repositioning of subtitles on

TVs that support this feature.

• [Display panel]: Set the brightness of

the home theater front panel display.

• [VCD PBC]: Enable or disable the

content menu navigation of VCD and

SVCD discs with Play Back Control

feature.

Energy saving settings

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Preference], and then press OK.

4 Press the Navigation buttons and OK to

select and change:

• [Screen saver]: Switch the home

theater to screen saver mode after 10

minutes of inactivity.

• [Auto standby]: Switch the home

theater to standby after 30 minutes of

inactivity. This timer works only when a

disc or USB play is paused or stopped.

• [Sleep timer]: Set the duration of the

sleep timer so that the home theater is

switched to standby after the specied

period.

Speaker settings

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Advanced], and then press OK.

4 Press the Navigation buttons and OK to

select and change:

• [Enhanced audio]: Select [On] to

enable audio post processing at the

speaker and enable karaoke settings

(if your product supports Karaoke).

To play the original audio of the disc,

select [Off].

29EN

Tip

• Enable audio post processing before you select a

predened sound mode (see 'Sound mode' on page

26).

Restore default settings

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Advanced] > [Restore default

settings], and then press OK.

4 Select [OK], and then press OK to

conrm.

» Your home theater is reset to its

default settings except for some

settings such as parental control and

DivX VOD registration code.

30 EN

6 Update software

Philips continually tries to improve its products.

To get the best features and support, update

your home theater with the latest software.

Compare the version of your current software

with the latest version on www.philips.com/

support. If the current version is lower than the

latest version available on the Philips support

website, upgrade your home theater with the

latest software.

Caution

• Do not install a lower version of software than the

current version installed on your product. Philips is not

liable for problems caused due to software downgrade.

Check software version

Check the version of the current software

installed on your home theater.

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Advanced] > [Version

information].

» The software version is displayed.

Update software through

USB

What you need

• A USB ash drive that is FAT or NTFS-

formatted, with at least 256MB of memory.

Do not use a USB hard drive.

• A computer with Internet access.

• An archive utility that supports the ZIP le

format.

Step 1: Download the latest software

1 Connect a USB ash drive to your

computer.

2 In your web browser, go to www.philips.

com/support.

3 At the Philips Support website, nd your

product and locate the Software and

drivers.

» The software update is available as a

zip le.

4 Save the zip le in the root directory of

your USB ash drive.

5 Use the archive utility to extract the

software update le in the root directory.

» The les are extracted under the

UPG_ALL folder of your USB ash

drive.

6 Disconnect the USB ash drive from your

computer.

Step 2: Update the software

Caution

• Do not switch off the home theater or remove the

USB ash drive during the update.

1 Connect the USB ash drive containing the

downloaded le to your home theater.

• Make sure that the disc compartment

is closed and no disc inside.

2 Press (Home).

3 Select [Setup], and then press OK.

4 Select [Advanced] > [Software update]

> [USB].

5 Follow the onscreen instructions to

conrm the update.

» Update process takes about 5 minutes

to complete.

31EN

Update software through the

Internet

1 Connect your home theater to a home

network with a high-speed Internet access

(see 'Connect and set up a home network'

on page 12).

2 Press (Home).

3 Select [Setup], and then press OK.

4 Select [Advanced] > [Software update] >

[Network].

» If an upgrade media is detected, you

are prompted to start or cancel the

update.

» Downloading of the upgrading le may

take long, depending on your home

network condition.

5 Follow the onscreen instructions to

conrm the update.

» Update process takes about 5 minutes

to complete.

» Once complete, the home theater

automatically switches off and restarts.

If it does not, disconnect the power

cord for a few seconds and then

reconnect it.

32 EN

7 Product

specifications

Note

• Specications and design are subject to change without

notice.

Region codes

The type plate on the back or bottom of the

home theater shows which regions it supports.

Media formats

• AVCHD, BD, BD-R/ BD-RE, BD-Video,

DVD-Video, DVD+R/+RW, DVD-R/-RW,

DVD+R/-R DL, CD-R/CD-RW, Audio CD,

Video CD/SVCD, Picture les, MP3 media,

WMA media, DivX Plus HD media, USB

storage device

Country

DVD BD

Europe,

United Kingdom

Korea

Latin America

Australia,

New Zealand

Russia, India

China

Asia Pacific, Taiwan,

File formats

• Audio:

• .aac, .mka, .mp3, .wma, .wav, .mp4, .m4a,

.ac, .ogg

• .ra (Available only in Asia Pacic and

China)

• Video:

• .avi, .divx, .mp4, .m4v, .mkv, .asf, .wmv,

.m2ts, .mpg, .mpeg, .v, .3gp

• .rmvb, .rm, .rv (Available only in Asia

Pacic and China)

• Picture: .jpg, .jpeg, .jpe, .gif, .png

Bluetooth

• Bluetooth proles: A2DP

• Bluetooth version: 2.1 + EDR

Audio formats

Your home theater supports the following

audio les.

(.ralesaresupportedonlyinAsiaPacicand

China)

Extension Container Audio

codec

Bit rate

.mp3 MP3 MP3 Upto 320

kbps

.wma ASF WMA Upto 192

kbps

.aac AAC AAC,

HE-

AAC

Upto 192

kbps

.wav WAV PCM 27.648

Mbps

.m4a MKV AAC 192 kbps

.mka MKA PCM 27.648

Mbps

Dolby

Digital

640 kbps

DTS

core

1.54 Mbps

MPEG 912 kbps

33EN

MP3 Upto 320

kbps

WMA Upto 192

kbps

AAC,

HE-

AAC

Upto 192

kbps

.ra RM AAC,

HE-

AAC

Upto 192

kbps

Cook 96469 bps

.ac FLAC FLAC Upto 24

bps

.ogg OGG Vorbis Variable

bit rate,

maximum

block size

4096

MP3 Upto 320

kbps

Video formats

If you have a high denition TV, your home

theater allows you to play your video les with:

• Resolution: 1920 x 1080 pixels at

• Frame rate: 6 ~ 30 frames per second.

.avilesinAVIcontainer

Audio

codec

Video codec Bit rate

PCM,

Dolby

Digital,

DTS core,

MP3,

WMA

DivX 3.11, DivX 4.x,

DivX 5.x, DivX 6.x

10 Mbps

max

MPEG 1, MPEG 2 40 Mbps

MPEG 4 SP / ASP 38.4

Mbps

H.264/AVC upto

HiP@4.2

25 Mbps

WMV9 45 Mbps

.divxlesinAVIcontainer

Audio codec Video codec Bit rate

PCM, Dolby

Digital, MP3,

WMA

DivX 3.11,

DivX 4.x, DivX 5.x,

DivX 6.x

Mbps

max

.mp4or.m4vlesinMP4container

Audio codec Video codec Bit rate

Dolby Digital,

MPEG, MP3,

AAC, HE-AAC,

DD+

MPEG 1,

MPEG 2

40 Mbps

MPEG 4 ASP 38.4

Mbps

H.264/AVC

HiP@4.2

25 Mbps

.mkvlesinMKVcontainer

Audio codec Video codec Bit rate

PCM, Dolby

Digital, DTS core,

MPEG, MP3,

WMA, AAC, HE-

AAC, DD+

DivX Plus HD 30 Mbps

MPEG 1, MPEG

40 Mbps

MPEG 4 ASP 38.4

Mbps

H.264/AVC

HiP@4.2

25 Mbps

WMV9 45 Mbps

.m2tslesinMKVcontainer

Audio codec Video codec Bit rate

PCM, Dolby Digital,

DTS core, MPEG,

MP3, WMA, AAC,

HE-AAC, DD+

MPEG 1,

MPEG 2

40 Mbps

MPEG 4 ASP 38.4

Mbps

H.264/AVC

HiP@4.2

25 Mbps

WMV9 45 Mbps

34 EN

.asfand.wmvlesinASFcontainer

Audio codec Video codec Bit rate

Dolby Digital,

MP3, WMA,

DD+

MPEG 4 ASP 38.4 Mbps

H.264/AVC

HiP@4.2

25 Mbps

WMV9 45 Mbps

.mpgand.mpeglesinPScontainer

Audio codec Video codec Bit rate

PCM, DTS core,

MPEG, MP3

MPEG 1,

MPEG 2

Mbps

.vlesinFLVcontainer

Audio

codec

Video codec Bit rate

MP3,

AAC

H.264/AVC upto

HiP@4.2

25 Mbps

H.263 38.4 Mbps

.3gplesin3GPcontainer

Audio

codec

Video codec Bit rate

AAC, HE-

AAC

MPEG 4 ASP 38.4 Mbps

H.264/AVC upto

HiP@4.2

25 Mbps

max

.rm,.rv,and.rmvblesinRMcontainer

(AvailableonlyinAsiaPacicandChina)

Audio codec Video codec Bit rate

AAC, COOK RV30, RV40 40 Mbps

Amplier

• Total output power: 500W RMS (30%

THD)

• Frequency response: 20 Hz-20 kHz /

±3 dB

• Signal-to-noise ratio: > 65 dB (CCIR) /

(A-weighted)

• Input sensitivity:

• AUX: 2 V

• AUDIO IN: 1 V

Video

• Signal system: PAL / NTSC

• HDMI output: 480i/576i, 480p/576p, 720p,

1080i, 1080p, 1080p24

Audio

• S/PDIF Digital audio input:

• Coaxial: IEC 60958-3

• Optical: TOSLINK

• Sampling frequency:

• MP3: 32 kHz, 44.1 kHz, 48 kHz

• WMA: 44.1 kHz, 48 kHz

• Constant bit rate:

• MP3: 32 kbps - 320 kbps

• WMA: 48 kbps - 192 kbps

Radio

• Tuning range:

• Europe/Russia/China: FM 87.5-108

MHz (50 kHz)

• Asia Pacic/Latin America: FM 87.5-108

MHz (50/100 kHz)

• Signal-to-noise ratio: FM 50 dB

• Frequency response: FM 180 Hz-12.5 kHz /

±3 dB

USB

• Compatibility: Hi-Speed USB (2.0)

• Class support: USB Mass Storage Class

(MSC)

• File system: FAT16, FAT32, NTFS

• USB connector:

• Front panel: 5V , 1A

• Rear panel: 5V , 500mA

Main unit

• Power supply:

• Europe/China: 220-240 V~, 50 Hz

35EN

• Latin America/Asia Pacic: 110-127

V/220-240 V~, 50-60 Hz

• Russia/India: 220-240 V~, 50 Hz

• Power consumption: 80 W

• Standby power consumption: ≤ 0.5 W

• Dimensions (WxHxD): 435 x 58 x 280

• Weight: 2.66 kg

Subwoofer

• Output power: 166 W RMS (30% THD)

• Impedance: 4 ohm

• Speaker drivers: 165 mm (6.5") woofer

• Dimensions (WxHxD):

• HTB5250DG/HTB5255D: 229 x 293

x 310 mm

• HTB6251D: 302 x 346 x 178 mm

• Cable length: 3 m

Speakers

• Output power: 2 x 166 W RMS (30%

THD)

• Speaker impedance: 4 ohm

• Speaker drivers: 1 x 78 mm (3") full range

• Dimensions (WxHxD):

• HTB5250DG/HTB5255D: 100 x 228

x 130 mm

• HTB6251D: 96 x 269 x 111 mm

Remote control batteries

• 2 x AAA-R03-1.5 V

Laser

• Laser Type (Diode): InGaN/AIGaN (BD),

AIGaInP (DVD/CD)

• Wave length: 405 +7 nm/-7 nm (BD), 655

+10 nm/-10 nm (DVD), 790 +10 nm/-20

nm (CD)

• Output power (Max. ratings): 20 mW

(BD), 6 mW (DVD), 7 mW (CD)

36 EN

8 Troubleshooting

Warning

• Risk of electric shock. Never remove the casing of the

product.

To keep the warranty valid, never try to repair

the product yourself.

If you have problems using this product, check

the following points before you request service.

If you still have a problem, get support at www.

philips.com/support.

Main unit

The buttons on the home theater do not

work.

• Disconnect the home theater from the

power supply for a few minutes, then

reconnect.

• Make sure that the touch buttons surface

is not in contact with any conductive

material, like water drop, metal, etc.

Picture

No picture.

• Make sure that the TV is switched to the

correct source for the home theater.

No picture on a TV connected through HDMI.

• Make sure that you use a High Speed

HDMI cable to connect the home theater

and TV. Some Standard HDMI cables do

not display properly for some images, 3D

video, or Deep Color.

• Make sure that the HDMI cable is not

faulty. If it is faulty, replace it with a new

cable.

• Press (Home) and then 731 on the

remote control to restore the default

picture resolution.

• Change the HDMI video setting, or wait

for 10 seconds for auto recovery (see

'Picture and video settings' on page 27).

Discdoesnotplayhigh-denitionvideo.

• Make sure that the disc contains high-

denition video.

• Make sure that the TV supports high-

denition video.

• Use an HDMI cable to connect to the TV.

Sound

No sound from home theater speakers.

• Connect the audio cable from your home

theater to your TV or other devices.

However, you do not need a separate

audio connection when:

• the home theater and TV are

connected through an HDMI ARC

connection, or

• a device is connected to the HDMI IN

connector on your home theater.

• Set up the audio for the connected device.

• Reset your home theater to its factory

settings, and then switch it off and switch

on again.

• On your home theater, press SOURCE

repeatedly to select the correct audio

input.

Distorted sound or echo.

• If you play audio from the TV through the

home theater, make sure that the TV is

muted.

Audio and video are not synchronized.

• 1) Press . 2) Press the Navigation

buttons (left/right) to select AUD

SYNC, and then press OK. 3) Press

the Navigation buttons (up/down) to

synchronize the audio with the video.

Play

Cannot play a disc.

• Clean the disc.

37EN

• Make sure that the home theater supports

the type of disc (see 'Media formats' on

page 32).

• Make sure that the home theater supports

the region code of the disc (see 'Region

codes' on page 32).

• If the disc is a DVD±RW or DVD±R disc,

make sure that it is nalized.

CannotplayaDivXle.

• Make sure that the DivX le is encoded

according to the 'Home Theater Prole'

with the DivX encoder.

• Make sure that the DivX le is complete.

DivX do not display correctly.

• Make sure that the subtitle le name is

the same as the movie le name (see

'Subtitles' on page 18).

• Select the correct character set: 1) Press

OPTIONS. 2) Select [Character set]. 3)

Select the supported character set. 4)

Press OK.

Cannot read the contents of a USB storage

device.

• Make sure that the format of the USB

storage device is compatible with the

home theater.

• Make sure that the le system on the USB

storage device is supported by the home

theater.

'No entry' or 'x' sign appears on the TV.

• The operation is not possible.

EasyLink does not work.

• Make sure that the home theater is

connected to a Philips brand EasyLink TV,

and the EasyLink option is turned on (see

'Set up EasyLink (HDMI-CEC control)' on

page 11).

• For TVs from different manufacturers, the

HDMI CEC could be called differently.

Check theTV user manual on how to

enable it.

When you switch on the TV, the home theater

automatically switches on.

• This behavior is normal when you are using

Philips EasyLink (HDMI-CEC). To make the

home theater work independently, switch

off EasyLink.

Cannot access BD-Live features.

• Make sure that the home theater is

connected to the network. Use a wired

network connection (see 'Set up the wired

network' on page 13), or wireless network

connection (see 'Set up the wireless

network' on page 13).

• Make sure that the network is set up.

Use a wired network installation (see 'Set

up the wired network' on page 13), or

wireless network installation (see 'Set up

the wireless network' on page 13).

• Make sure that the Blu-ray disc supports

BD-Live features.

• Clear memory storage (see 'BD-Live on

Blu-ray' on page 16).

My 3D video played in 2D mode.

• Make sure that your home theater is

connected to a 3D TV through an HDMI

cable.

• Make sure that the disc is a Blu-ray 3D disc,

and the Blu-ray 3D video option is on (see

'BD-Live on Blu-ray' on page 16).

TV screen is black when you play a Blu-ray 3D

video or a DivX copy protected video.

• Make sure that the home theater is

connected to the TV through an HDMI

cable.

• Switch to the correct HDMI source on

the TV.

Cannot download video from an online video

store.

• Make sure that your home theater is

connected to the TV through an HDMI

cable.

• Make sure that the USB storage device

is formatted, has enough memory to

download the video.

38 EN

• Make sure that you have paid for the video,

and it is within the rental period.

• Make sure that the network connection

is good. Use a wired network connection

(see 'Set up the wired network' on page

13), or a wireless network connection (see

'Set up the wireless network' on page 13).

• Visit the video store website for more

information.

Bluetooth

A device cannot connect with the home

theater.

• The device does not support the

compatible proles required for the home

theater.

• You have not enabled the Bluetooth

function of the device. See the user manual

of the device on how to enable the

function.

• The device is not correctly connected.

Connect the device correctly. (see 'Play

audio through Bluetooth' on page 17)

• The home theater is already connected

with another Bluetooth device. Disconnect

the connected device, then try again.

Quality of audio play from a connected

Bluetooth device is poor.

• The Bluetooth reception is poor. Move

the device closer to the home theater, or

remove any obstacle between the device

and the home theater.

The connected Bluetooth device connects and

disconnects constantly.

• The Bluetooth reception is poor. Move

the device closer to the home theater, or

remove any obstacle between the device

and the home theater.

• Turn off Wi-Fi function on the Bluetooth

device to avoid interference.

• For some Bluetooth, the Bluetooth

connection can be deactivated

automatically to save power. This does

not indicate any malfunction of the home

theater.

Network

Wireless network distorted or not found.

• Make sure that the wireless network is

not disturbed by microwave ovens, DECT

phones, or other neighboring Wi-Fi devices.

• Place the wireless router and the home

theater within ve meters of each other.

• If the wireless network does not work

properly, try a wired network installation

(see 'Set up the wired network' on page

13).

39EN

9 Notice

This section contains the legal and trademark

notices.

This item incorporates copy protection

technology that is protected by U.S. patents

and other intellectual property rights of

Rovi Corporation. Reverse engineering and

disassembly are prohibited.

This product incorporates proprietary

technology under license from Verance

Corporation and is protected by U.S. Patent

7,369,677 and other U.S. and worldwide

patents issued and pending as well as copyright

and trade secret protection for certain aspects

of such technology. Cinavia is a trademark of

Verance. Reverse engineering or disassembly is

prohibited.

Cinavia notice

This product uses Cinavia technology to

limit the use of unauthorized copies of some

commercially-produced lm and videos and

their soundtracks. When a prohibited use of an

unauthorized copy is detected, a message will

be displayed and playback or copying will be

interrupted.

More information about Cinavia technology

is provided at the Cinavia Online Consumer

Information Center at http://www.cinavia.com.

To request additional information about Cinavia

by mail, send a postcard with your mailing

address to: Cinavia Consumer Information

Center, P.O. Box 86851, San Diego, CA, 92138,

USA.

Open source software

Philips Electronics Hong Kong Ltd. hereby offers

to deliver, upon request, a copy of the complete

corresponding source code for the copyrighted

open source software packages used in this

product for which such offer is requested by

the respective licenses.

This offer is valid up to three years after

product purchase to anyone in receipt of this

information. To obtain source code, please

contact open.source@philips.com. If you prefer

not to use email or if you do not receive

conrmation receipt within a week after mailing

to this email address, please write to "Open

Source Team, Philips Intellectual Property &

Standards, P.O. Box 220, 5600 AE Eindhoven,

The Netherlands." If you do not receive timely

conrmation of your letter, please email to the

email address above.

Compliance

This product complies with the radio

interference requirements of the European

Community.

Hereby, Philips Consumer Lifestyle, declares that

this product is in compliance with the essential

requirements and other relevant provisions of

Directive 1999/5/EC.

A copy of the EC declaration of Conformity

is available in the Portable Document Format

(PDF) version of the user manual at www.

philips.com/support.

40 EN

Trademarks

"Blu-ray 3D " and "Blu-ray 3D " logo are

trademarks of Blu-ray Disc Association.

'DVD Video' is a trademark of DVD Format/

Logo Licensing Corporation.

Java and all other Java trademarks and logos are

trademarks or registered trademarks of Sun

Microsystems, Inc. in the United States and/or

other countries.

Manufactured under license under U.S. Patent

Nos: 5,956,674; 5,974,380; 6,487,535 & other

U.S. and worldwide patents issued & pending.

DTS, the Symbol, & DTS and the Symbol

together are registered trademarks & DTS

2.0+Digital Out is a trademark of DTS, Inc.

Reserved.

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol

are trademarks of Dolby Laboratories.

DivX , DivX Certied , DivX Plus HD

and associated logos are trademarks of Rovi

Corporation or its subsidiaries and are used

under license.

ABOUT DIVX VIDEO: DivX

is a digital video

format created by DivX, LLC, a subsidiary

of Rovi Corporation. This is an ofcial DivX

Certied

device that plays DivX video. Visit

divx.com for more information and software

tools to convert your les into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This

DivX Certied

device must be registered

in order to play purchased DivX Video-on-

Demand (VOD) movies. To obtain your

registration code, locate the DivX VOD section

in your device setup menu. Go to vod.divx.com

for more information on how to complete your

registration.

DivX Certied

to play DivX and DivX Plus

HD (H.264/MKV) video up to 1080p HD

including premium content.

The terms HDMI and HDMI High-Denition

Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other

countries.

The Bluetooth word mark and logos are

registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by Philips

is under license. Other trademarks and trade

names are those of their respective owners.

CLASS 1

LASER PRODUCT

41EN

10 Language code

Abkhazian 6566

Afar 6565

Afrikaans 6570

Amharic 6577

Arabic 6582

Armenian 7289

Assamese 6583

Avestan 6569

Aymara 6589

Azerhaijani 6590

Bahasa Melayu 7783

Bashkir 6665

Belarusian 6669

Bengali 6678

Bihari 6672

Bislama 6673

Bokmål, Norwegian 7866

Bosanski 6683

Brezhoneg 6682

Bulgarian 6671

Burmese 7789

Castellano, Español 6983

Catalán 6765

Chamorro 6772

Chechen 6769

Chewa; Chichewa; Nyanja 7889

9072

Chuang; Zhuang 9065

Church Slavic; Slavonic 6785

Chuvash 6786

Corsican 6779

Česky 6783

Dansk 6865

Deutsch 6869

Dzongkha 6890

English 6978

Esperanto 6979

Estonian 6984

Euskara 6985

 6976

Faroese 7079

Français 7082

Frysk 7089

Fijian 7074

Gaelic; Scottish Gaelic 7168

Gallegan 7176

Georgian 7565

Gikuyu; Kikuyu 7573

Guarani 7178

Gujarati 7185

Hausa 7265

Herero 7290

Hindi 7273

Hiri Motu 7279

Hrwatski 6779

Ido 7379

Interlingua (International)7365

Interlingue 7365

Inuktitut 7385

Inupiaq 7375

Irish 7165

Íslenska 7383

Italiano 7384

Ivrit 7269

Japanese 7465

Javanese 7486

Kalaallisut 7576

Kannada 7578

Kashmiri 7583

Kazakh 7575

Kernewek 7587

Khmer 7577

Kinyarwanda 8287

Kirghiz 7589

Komi 7586

Korean 7579

Kuanyama; Kwanyama 7574

Kurdish 7585

Lao 7679

Latina 7665

Latvian 7686

Letzeburgesch; 7666

Limburgan; Limburger 7673

Lingala 7678

Lithuanian 7684

Luxembourgish; 7666

Macedonian 7775

Malagasy 7771

Magyar 7285

Malayalam 7776

Maltese 7784

Manx 7186

Maori 7773

Marathi 7782

Marshallese 7772

Moldavian 7779

Mongolian 7778

Nauru 7865

Navaho; Navajo 7886

Ndebele, North 7868

Ndebele, South 7882

Ndonga 7871

Nederlands 7876

Nepali 7869

Norsk 7879

Northern Sami 8369

North Ndebele 7868

Norwegian Nynorsk; 7878

Occitan; Provencal 7967

Old Bulgarian; Old Slavonic 6785

Oriya 7982

Oromo 7977

Ossetian; Ossetic 7983

Pali 8073

Panjabi 8065

Persian 7065

Polski 8076

Português 8084

Pushto 8083

Russian 8285

Quechua 8185

Raeto-Romance 8277

Romanian 8279

Rundi 8278

Samoan 8377

Sango 8371

Sanskrit 8365

Sardinian

8367

Serbian 8382

Shona 8378

Shqip 8381

Sindhi 8368

Sinhalese 8373

Slovensky 8373

Slovenian 8376

Somali 8379

Sotho; Southern 8384

South Ndebele 7882

Sundanese 8385

Suomi 7073

Swahili 8387

Swati 8383

Svenska 8386

Tagalog 8476

Tahitian 8489

Tajik 8471

Tamil 8465

Tatar 8484

Telugu 8469

Thai 8472

Tibetan 6679

Tigrinya 8473

To nga (Tonga Islands) 8479

Tsonga 8483

Tswana 8478

Türkçe 8482

Tu rkmen 8475

Tw i 8487

Uighur 8571

Ukrainian 8575

Urdu 8582

Uzbek 8590

Vietnamese 8673

Volapuk 8679

Walloon 8765

Welsh 6789

Wolof 8779

Xhosa 8872

Yiddish 8973

Yo ruba 8979

Zulu 9085

Ё᭛

42 EN

11 Index

2nd audio language 16

2nd subtitle language

3D disc in 2D mode 16

3D safety

3D video

advanced settings 28

amplier

audio connection (analog cable)

audio connection (HDMI ARC)

audio formats

audio from other devices

audio language

audio options

audio post processing

audio settings

auto standby

auto subtitle shift

auto volume

batteries 35

BD-Live

Blu-ray

Bonus View

brightness

change password 28

character set

clear BD-Live memory

connect a digital device (HDMI)

connect to TV

connectors

control buttons (disc)

control buttons (USB)

datales 17

deep color

default settings

device name

disc language

disc menu

display panel

disposal

DivX

Easylink (HDMI-CEC) 11

eject disc

enhanced audio

environment

factory settings 29

leformats 32

HDMI ARC 9

HDMI audio

HDMI-CEC

home menu

home network

internet 12

iPod or iPhone

language code 41

main unit 5

media formats

media sharing

menu language

musical slideshows

43EN

network 12

night mode

one-touch play 12

one-touch standby

options

parental control 28

PBC (play back control)

picture options

picture resolution

picture settings

picture-in-picture

play disc

play from iPod

play from PC

play USB storage device

power settings

predenedsoundmode 26

preference

recycling 3

region codes

remote control

repeat

shufe 19

sleep timer

slide animation

Smart TV

software update

software version

sound

speaker position

speakerspecications 32

subtitle language

subtitle position

surround sound

synchronize picture and sound

troubleshooting (network) 38

troubleshooting (picture)

troubleshooting (play)

troubleshooting (sound)

tuning grid

update software (through Internet) 31

USB storage device

VCD 28

video connection (composite video)

video connection (HDMI ARC)

video connection (standard HDMI)

video formats

video options

video settings

VOD code (DivX)

watch 3D 16

wired network

wireless network

Philips Consumer Lifestyle B.V.

Philips Consumer Lifestyle B.V. template AMB 544-9056

HK-1312- HTB525XD(G) HTB6251D 2013/03

................................................................. ..............................................................................................

(Document No. / Numéro du document) (Year, Month (yyyy/mm) in which the CE mark is affixed /

Année/mois (aaaa/mm) au cours de laquelle le marquage

CE a été apposé)

EUROPEAN DECLARATION OF CONFORMITY

(DECLARATION DE CONFORMITE CE)

We / Nous, PHILIPS CONSUMER LIFESTYLE B.V.

(Company name / Nom de l’entreprise)

TUSSENDIEPEN 4, 9206 AD DRACHTEN, THE NETHERLANDS

(address / adresse)

declare under our responsibility that the product(s):

(déclarons sous notre propre responsabilité que le(s) produit(s))

Philips

.............................................................................

HTB5255D/12,HTB5250DG/12,HTB6251D/12

...........................................................................

(brand name, nom de la marque)

(Type version or model, référence ou modèle)

Home Theater

.............................................................................

(

product description, description du produit)

to which this declaration relates is in confirmity with the following harmonized standards:

(auquel cette déclaration se rapporte, est conforme aux normes harmonisées suivantes)

(title, number and date of issue of the standard / titre, numéro et date de parution de la norme)

EN 60065:2006+A1:2006+A11:2008+A2:2010+A12:2011

EN 55013:2001+A1:2003+A2:2006 EN 55020:2007+A11:2011

EN55022:2010 EN55024:2010

EN61000-3-2:2006+A1:2009+A2:2009 EN61000-3-3:2008

EN301489-1 V1.9.2 :2011 EN301489-17 V2.1.1 : 2009

EN300328 V1.7.1:2006 EN62311:2008

EN50564 : 2011 EN62479:2010

EN50581: 2012

following the provisions of :

(conformément aux exigences essentielles et autres dispositions pertinentes de:)

2006/95/EC (Low Voltage Directive)

2004/108/EC (EMC directive)

1999/5/EC (R&TTE Directive)

2011/65/EU (RoHS Directive)

2009/125/EC (Eco Design) - EC/1275/2008

And are produced under a quality scheme at least in conformity with ISO 9001 or CENELEC Permanent Documents

(Et sont fabriqués conformément à une qualité au moins conforme à la norme ISO 9001 ou aux Documents Permanents CENELEC)

Only for Medical Devices and R&TTE products:

The Notified Body:

CE0560

..................................................

performed:

................................................................................

(L’Organisme Notifié) (Name and number/ nom et numéro)

(a effectué)

(description of intervention / description de ’intervention)

and issued the certificate: 13214036/AA/00

...........................................................

(et a délivré le certificat)

(certificate number / numéro du certificat)

Remarks:

Drachten, Netherlands, March 21, 2013 A.Speelman, CL Compliance Manager

.........................................................

...................................................................

(place,date / lieu, date) (signature, name and function / signature, nom et fonction)

Specifications are subject to change without notice

HTB5250DG/5255D/6251D_12_UM_V1.0

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips HTB5250DG in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips HTB5250DG

Philips HTB5250DG Quick start guide - English, German - 12 pages

Philips HTB5250DG User Manual - German - 52 pages

Philips HTB5250DG Quick start guide - Dutch - 12 pages

Philips HTB5250DG User Manual - Dutch - 49 pages

Philips HTB5250DG Quick start guide - French - 12 pages

Philips HTB5250DG User Manual - French - 50 pages

Philips HTB5250DG User Manual - Polish - 51 pages

Philips HTB5250DG User Manual - Portuguese - 50 pages

Philips HTB5250DG User Manual - Spanish - 51 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips HTB5250DG Manual

Product: