606593
10
Zoom out
Zoom in
Previous page
1/358
Next page
Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads.
Note: The shaver is watertight and can be cleaned with water.
1 Press the on/off button to switch on the shaver.
Note: Clean the shaver while it is switched on.
2 Immerse the shaving unit/trimmer in hot water for at least 30 seconds (Fig. 24).
3 Switch off the shaver and shake off excess water.
4 Slide the protection cap onto the shaver to prevent damage (Fig. 20).
Note: If the shaver does not shave as well as it used to and you are unable to solve this with the cleaning
method described in this chapter, consult chapter ‘Troubleshooting’ for an extra-thorough cleaning
method.

1 Lubricate the trimmer teeth with a drop of sewing machine oil every six months.


1 Store the shaver in the rell & charge station.
2 If you are going to travel or if you do not want to store the shaver in the rell & charge
station, put the protection cap on the shaver and store the shaver in the pouch (Fig. 20).

If you are going to store the shaver for a longer period or if you are going to travel, it is possible to
lock the shaver. The travel lock prevents the shaver from being switched on by accident.

1 Make sure the shaver is switched off.
2 Press and hold the shaving conditioner button (1) and simultaneously press the on/off button
with your other hand (2) (Fig. 25).
3 Hold both buttons for 6 seconds. Wait until the shaver produces a brief humming sound and
the middle charging light on the shaver ashes a few times.
, The travel lock is now activated.
Note: If you accidently press the on/off button rst, the shaver starts working . If this happens, press the
on/off button again to switch off the shaver.
Note: If you press the on/off button when the travel lock is activated, the middle charging light ashes
white to indicate that the shaver is locked.
Tip: Press the on/off button to check if the travel lock is activated. If the travel lock is activated, the
shaver does not go on.

1 Press and hold the shaving conditioner button (1) and simultaneously press the on/off button
with your other hand (2) (Fig. 25).
2 Hold both buttons for 6 seconds. Wait until the shaver produces a brief humming sound and
the middle charging light on the shaver ashes a few times.
, The travel lock is now deactivated.
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HS8400 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HS8400 series in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info