673197

Philips HR7952 Manual

11
Zoom out
Zoom in
Previous page
1/94
Next page
17
English
EN
1 Clean the motor unit with a moist cloth.
2 Clean the other parts in hot water
(< 60ºC) with some washing-up liquid or
in a dishwasher.
3 Store the appliance and accessories in a
dry place after cleaning.
Quick cleaning
Follow the steps below to clean the food
processor bowl and blender jar easier.
(Make sure that the blade is assembled in the
bowl if you clean the food processor bowl.)
1 Pour lukewarm water (not more than
0.5 liters) and a few drops of washing-up
liquid into the food processor bowl or
blender jar.
2 Place the lid on the food processor bowl
or blender jar, and then turn it clockwise
to x it.
3 Turn the knob to speed P. Let the
appliance run for 30 seconds or until the
food processor bowl or blender jar is
clean.
4 After use, turn the knob to 0 position and
then unplug the appliance.
5 Detach the blender jar or food processor
bowl and rinse it with clean water.
6 Guarantee and
service
If you have a problem, need service, or need
information, see www.philips.com/support
or contact the Philips Consumer Care Center
in your country. The phone number is in the
worldwide guarantee leaet. If there is no
Consumer Care Center in your country, go to
your local Philips dealer.
Mill (HR7958 only)
Before you start, make sure that you assemble
according to Fig. 8.
You can use the mill to chop/grind coffee
beans, peppercorns, nuts, herbs, dried fruits etc.
Dried fruits such as gs can be chopped and
use as toppings for yoghurt or spread for your
bread or biscuit.
For best results when processing dried black
Mission gs, use max of 85g at speed P for
3 seconds.
Note
•
Follow the recommended quantities, processing time
and speed for the ingredients as indicated in Fig 9.
• Do not exceed the maximum level of the mill jar.
• You can order a mill (under service code 96510070528
and 996510070501) from your Philips dealer or a
Philips service center as an extra accessory.
Tip
•
Before opening the mill with processed ingredients
1. Hold the mill jar upside down.
2. Tap the mill jar a few times.
3. Remove the blade assembly slowly.
5 Cleaning
Warning
•
Before you clean the appliance, unplug it.
• Refer to the table (Fig. 10) for information on cleaning
the parts with water, dishwashing machine and/or moist
cloth.
Caution
•
Make sure that the cutting edges of the blades and discs
do not come into contact with hard objects. This may
cause the blade to get blunt.
• The cutting edges are sharp. Be careful when you clean
the disc inserts, and blade units of the food processor,
blender, and mill.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HR7952 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HR7952 in the language / languages: All languages as an attachment in your email.

The manual is 13,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info