8
ENGLISH
- Be careful if hot liquid is poured into the blender as it can be
ejected out of the appliance due to a sudden steaming.
- Do not operate the blender for more than 30 seconds without
any ingredient. It may lead to overheating.
- This appliance is intended for household use only.
- Never assemble or disassemble the blender jar, the grinder or
the tumbler to the motor base while the power is on.
- Make sure the air inlets in the bottom are not blocked. This can
lead to an overheating of the device.
Caution
- In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through
an external switching device, such as a timer, or connected to
a circuit that is regularly switched on and o by the utility.
- Never ll the blender jar with ingredients hotter than 80°C.
- Never use any accessories or parts from other manufacturers
or that Philips does not specically recommend. If you use
such accessories or parts, your guarantee becomes invalid.
- Do not exceed the maximum indication on the blender jar.
• To prevent spillage, do not put more than 2 litres (plastic
jar) of liquid in the blender jar, especially when you process
at a high speed. Do not put more than 1,5 litres (plastic
jar) in the blender jar when you process hot liquids or
ingredients that tend to foam.
- Do not exceed the maximum quantities and processing times
indicated in the relevant table.
- If food sticks to the wall of the blender jar, switch o the
appliance and unplug it. Then use a spatula to remove the
food from the wall.
- Do not let the appliance run for more than 3 minutes at a time.
Let the appliance cool down to room temperature before you
continue processing.
- Do not use glass jar right after taking it out from dishwasher of
refrigerator. Let it stay at room temperature for at least 5 min
before use.
- Stop and unplug the appliance if there is a pungent smell or
smoke. Let it cool down for 15 minutes.
- For safety reasons the blender can only be started via the user
interface of the blender and not via the App.
