381070
7
Zoom out
Zoom in
Previous page
1/100
Next page
- If food sticks to the wall of the blender jar, switch off the appliance and unplug it. Then use a
spatula to remove the food from the wall.
- Never ll the blender jar with ingredients hotter than 60°C.
- To prevent spillage, do not put more than 1.5 litres of liquid in the blender jar, especially when
you process at high speed (speed 2). Do not put more than 1 litre in the blender jar when
you process hot liquids or ingredients that tend to foam strongly.
- Always make sure the blender lid is properly assembled on the blender jar and the measuring
cup or the spatula is inserted in the lid before you switch on the appliance.
- Do not use any other spatula than the one provided with this appliance.

This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.

A Lid of blender jar
B Blender jar
C Sealing ring for coupling unit
D Coupling unit
E Sealing ring for dispenser
F Dispenser
G Sealing ring for blade unit
H Blade unit
I Dispenser cover
J Dispensing lever
K Drip tray
L Rubber foot (4x)
M Cord storage facility
N Control knob
O Spatula
P Measuring cup

1 Thoroughly clean the parts that come into contact with food before you use the appliance
for the rst time (see chapter ‘Cleaning’).

1 Fasten the coupling unit to the blender jar (Fig. 2).
Make sure the sealing ring is positioned correctly between the blender jar and the coupling unit.
2 Slide the small sealing ring around the threaded connector of the coupling unit of the blender
jar (Fig. 3).
3 Place the dispenser on the threaded connector of the coupling unit of the blender jar (1).
Screw the dispenser clockwise onto the coupling unit of the blender jar (2) (Fig. 4).
4 Put the thin sealing ring on the blade unit. (Fig. 5)
Make sure that the sealing ring is placed correctly.
5 Insert the blade unit into the bottom of the coupling unit (1). Screw the blade unit anti-
clockwise until it is properly xed (2) (Fig. 6).
ENGLISH 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hr2800 500 w 2 snelheden blender at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hr2800 500 w 2 snelheden blender in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info