751613
9
Zoom out
Zoom in
Previous page
1/106
Next page
11
ENGLISH
Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, visit
www.philips.com/support for a list of frequently asked questions or contact the
Consumer Care Center in your country.
Problem Cause Solution
The indicators do not
light up.
The power plug is not
connected correctly.
Check whether the power plug is
plugged correctly and the outlet is
working properly.
After pressing the
On/o button the
appliance sounds but
does not work.
The mixing chamber,
the shaping disc, or the
front panel is assem-
bled incorrectly.
Make sure you follow the user
manual to assemble all parts
correctly.
The safety switch is
triggered and the
appliance suddenly
stopped or suddenly
restarts during the
processing.
The front panel knob is
loose.
Make sure the front panel is securely
assembled.
Excessive ingredients in
the pasta maker.
The maximum amount of our used
for each batch is 600g. If more than
600g is added, reduce the amount
of our before next batch.
During processing,
the appliance stops
working when you
open the lid.
For safety reasons,
the appliance always
stops working when
the lid is opened during
processing.
If you need to resume the previous
operation, close the lid properly, and
press the Start/pause button.
During processing,
the appliance stops.
There is no alarm
sound or ashes.
The pasta maker has
overheated due to long
continuous working
time.
Disconnect from the power source,
and allow the pasta maker to cool
down. To better protect the lifetime
of the appliance, the continuous
working time should be less than 45
minutes. You can restart using the
appliance after 15 minutes of rest.
When weighing the
our, the weight
shown on the screen
changes all the time.
You are touching the
appliance or the power
cord.
When the appliance is weighing the
our, do not touch the appliance or
the power cord.
Small amount of
water is leaking out
from the appliance.
Water is added before
the program starts.
Follow the user manual instructions
to add water right after the program
starts.
Unable to make pasta
successfully with the
liquid calculation
function.
The required liquid
amount indicated on
the display screen does
not apply to some
recipes (for example
cookies, gluten free
pasta).
These recipes require you to skip the
liquid calculation part. In this case,
press the Start/pause button for 5
seconds, and the appliance will start
mixing and extruding directly.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HR2381 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HR2381 in the language / languages: All languages as an attachment in your email.

The manual is 24,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info