751615
6
Zoom out
Zoom in
Previous page
1/82
Next page
8
ENGLISH
Starting the pasta making program
1 Put the plug in the power socket. The appliance sounds once, and all indicators ash
once. (Fig. 18)
2 Press the On/o button to switch on the appliance. (Fig. 19)
3 Press the Start/pause button to start the automatic pasta making program. (Fig. 20)
Note: If the appliance is not in the automatic mode, press the Automatic button
before pressing the Start/pause button.
4 After the mixing starts, slowly pour in the liquid along the entire length of the slot in
the lid. (Fig. 21)
Note: During dough mixing, do not add other ingredients after you have poured in
the liquid. Otherwise, it will aect the result of the pasta texture.
5 After the pasta maker nishes mixing, it will beep once and start extruding pasta
after a few seconds. Use the pasta cutter to cut the pasta into the length you need.
(Fig. 22)
Note: If the ratio of liquid and our is not correct, the extrusion will not succeed. In
this case, prepare the ingredients again.
6 After the pasta making is complete, if you notice some leftover dough inside the
chamber, you can press the Extrusion only button, and then the Start/pause button
to start extra extrusion. (Fig. 23)
Note
yThe extra extrusion lasts for 3 minutes.
yThe cooking time of the pasta varies depending on personal preferences, pasta
shapes, and number of servings.
Important!
The pasta recipes provided in the recipe book have been tested for success. If you
experiment with or use other pasta recipes, the our and water/egg ratios will need to
be adjusted. The pasta maker will not operate successfully if you do not adjust the new
recipe accordingly.
Note
yTo ensure the quality of the pasta, use gluten our to make pasta. Follow the
recommended proportion to add the ingredients.
ySeasonal changes and using ingredients from dierent regions may aect the
our/water ratio. You may adjust based on the recommended proportion.
yWhen making egg pasta or vegetable pasta, make sure you whisk the egg mixture
or vegetable juice evenly with the water before pouring into the chamber through
the slot in the lid. When adding ingredients, make sure the ingredient is in a liquid
form.
ySee the recipe book provided for additional pasta recipe variations.
Cleaning
1 Disconnect the plug from the power outlet. (Fig. 24)
2 Remove the mixing chamber lid. (Fig. 3)
3 Loosen the front panel control knobs. (Fig. 4)
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HR2375 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HR2375 in the language / languages: All languages as an attachment in your email.

The manual is 8,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info