776022
8
Zoom out
Zoom in
Previous page
1/100
Next page
10
ENGLISH
yThoroughly clean all parts before you use the appliance for the rst time (see
chapter ‘Cleaning’).
1 Pull the lid to unlock it and then remove the lid from the mixing chamber. (Fig. 3)
2 Slide the mixing chamber o the main unit. (Fig. 4)
3 Turn the shaping disc holder counterclockwise to remove it from the mixing chamber
outlet. (Fig. 5)
4 Put your nger in the mixing chamber and push the squeezing tube outwards to slide
it out of the mixing chamber outlet (Fig. 6). Detach the shaping disc, and then pull the
squeezing bar out of the squeezing tube (Fig. 7).
5 Take the mixing paddle out of the mixing chamber. (Fig. 8)
6 Clean all detachable parts and accessories, and then wipe them dry. (Fig. 9&10)
Assembling
Important
yMake sure the appliance is not plugged in during assembly.
1 Slide the mixing chamber onto the main unit. (Fig. 11)
Note: Make sure the xing levers on the main unit are tted with the openings on
the bottom of the mixing chamber.
2 Put the mixing paddle in the mixing chamber. (Fig. 12)
3 Insert the squeezing tube into the mixing chamber. (Fig. 13)
Note: Make sure the big opening on the squeezing tube faces up when you insert the
tube into the chamber.
4 Insert the squeezing bar into the mixing chamber. Make sure the squeezing bar slides
all the way through both the squeezing tube and the mixing paddle and into the
shaft in the main unit. (Fig. 14)
Note: Slightly turn the mixing paddle to make sure the squeezing bar is connected
correctly with the shaft in the main unit.
5 Attach the shaping disc on the mixing chamber outlet. (Fig. 15)
Note
yMake sure the at side of the shaping disc is facing out.
yMake sure the shaping disc ts into the xing point on the squeezing bar.
yMake sure the arrow on the shaping disc face upwards when you attach it on the
mixing chamber outlet. Pay special attention when you do so for the lasagna/
dumpling shaping disc. This is to make sure that the opening of the lasagna sheet
is on the top.
6 Press the shaping disc through the opening of the shaping disc holder (Fig. 16), and
then assemble the holder on the mixing chamber outlet. Turn the holder clockwise to
rmly lock it in place (Fig. 17).
Note: Always attach the shaping disc on the mixing chamber outlet before you
assemble the shaping disc holder. Never put the shaping disc in the shaping disc
holder and assemble them on the mixing chamber outlet at the same time. (Fig. 18)
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HR2332 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HR2332 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 4.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info