658624

Philips HR2304 ice cream maker Manual

8
Zoom out
Zoom in
Previous page
1/32
Next page
Do not rinse the frozen cooling disc, as this cause a thick lm of ice to develop on the outside of
the disc right away.
4 Place the frozen cooling disc in the bowl of the ice-cream maker (Fig. 2).
5 Insert the front edge of the motor unit into the lid. (Fig. 3)
6 Push the motor unit downwards into the lid until it locks into place (‘click’) (Fig. 4).
7 Insert the stirrer into the hole of the motor unit (‘click’) (Fig. 5).
8 Place the lid with motor unit on the bowl in the correct position. Turn the lid clockwise until
it locks into place (‘click’) (Fig. 6).
9 Put the mains plug in the wall socket and switch on the appliance.
Always switch on the appliance before you put the ingredients in the bowl. This is necessary to
prevent the ingredients from freezing onto the cooling disc right away.
10 Pour the mixture of ingredients into the ice-cream maker through the lling opening in the
lid.
11 Let the ice-cream maker work until the ice cream has the right consistency.
The preparation time greatly depends on the type of ice-cream mixture and the temperature of the
ingredients. It takes about 40 minutes to make compact ice cream and about 20 minutes to make
soft ice cream.
Tips
Do not switch off the appliance too early. If you switch off the appliance too soon, the
ingredients freeze onto the cooling disc. This makes it impossible for the stirrer to continue
rotating in case the ice cream is not ready yet.
Do not let the ice-cream maker operate too long. Switch it off as soon as you see that the ice
cream starts to melt at the surface or on the sides.
It is not possible to make another batch of ice cream right away, because the cooling disc must
rst be properly frozen again. If you want to be able to make two batches of ice cream in a
row, order an extra cooling disc.
After use
1 To remove the lid, pull the release slide towards you (1) and turn the lid anticlockwise
(2) (Fig. 7).
2 Remove the ice cream from the bowl.
3 Pull the stirrer out of the motor unit. (Fig. 8)
4 Press the release button and remove the motor unit from the lid (Fig. 9).
5 Remove the cooling disc from the bowl (Fig. 10).
Cleaning
Always disassemble the ice-cream maker and clean its parts after use.
1 Make sure the appliance is unplugged.
2 Clean the lid (without the motor unit!), the stirrer and the bowl in hot water with some
washing-up liquid. Clean the cooling disc in lukewarm water (max. 40°C/100°F) with some
washing-up liquid.
These parts are not dishwasher-proof!
3 Clean the motor unit with a damp cloth.
-
-
-
ENGLISH8
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HR2304 ice cream maker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HR2304 ice cream maker in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info