381071
8
Zoom out
Zoom in
Previous page
1/100
Next page
Caution
- Never use the mill for more than 30 seconds without interruption. Let the mill cool down for at
least 1 minute between processing cycles.
- Never forget to place the sealing ring in the blade unit before you assemble the mill jar,
otherwise leakage occurs.
- Always process cloves, star anise and aniseed together. If processed separately, these ingredients
may attack the plastic materials of the appliance.
- The mill beaker may become discoloured when you use the mill to process ingredients such as
cloves, anise and cinnamon.
- The mill is not suitable for chopping raw meat. Use the blender instead.
- Do not use the mill to process liquids such as fruit juice.
Filter (HR2004 only)
Caution
- Never use the lter to process ingredients hotter than 80°C.
- Never overload the lter. Do not put more than 70g dried soy beans or 150g fruit in the lter
at the same time.
- Always make sure the lid is closed/assembled properly and the measuring cup is inserted
properly in the lid before you switch on the appliance.
- Cut fruit into smaller pieces before you put it in the lter.
- Soak dried ingredients, such as soy beans, before you put them in the lter.

Thoroughly clean the parts that come into contact with food before you use the appliance for the
rst time (see chapter ‘Cleaning’).
Using the appliance
Blender
The blender is intended for ne pureeing, chopping and blending. With the blender you can prepare
soups, sauces and milk shakes. You can also use it to process vegetables, fruit, meat, pancake batter
etc.
Preparing the blender for use
1 Assemble the sealing ring on the blender blade unit (Fig. 2).
2 Screwthebladeunitontothebottomoftheblenderjaruntilthebladeunititisxed
properly. (Fig. 3)
3 Puttheblenderjarwiththebladeunitattachedonthemotorunitandxitbyturningit
clockwise (‘click’). (Fig. 4)
The blender jar can be mounted in two positions: with the handle on the right side or on the left
side.
4 Put the mains plug in the wall socket.
Using the blender
1 Put the ingredients in the blender jar.
2 Close the lid.
HR2011/HR2010: Place the lid on the blender jar, push it down and turn the lid clockwise (‘click’).
3 Insert the measuring cup into the opening in the lid. (Fig. 5)
4 Turn the control knob to speed 1 or 2.
ENGLISH8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hr2010 350w 1 5l blender at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hr2010 350w 1 5l blender in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info