Manual Philips HR1619 (page 9 of 108) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

507605

Zoom out

Zoom in

1/108

5 Putthelidonthebowl(1).Turnthelidanticlockwise(2)toxit(‘click’)(Fig.7).

6 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 8).

7 Put the pusher in the feeding tube.

Note: The pusher prevents spillage.

8 Press the on/off button or the turbo speed button to switch on the appliance.

- When you use the on/off button, you can adjust the speed with the speed selector. The higher

the speed, the shorter the processing time required.

- When you use the turbo speed button, the appliance operates at maximum speed. In this case,

you cannot adjust the speed with the speed selector.

Note: If the ingredients stick to the wall of the bowl, release the button to switch off the appliance and

loosen the ingredients with a spatula or add some liquid.

Note: Always let the appliance cool down after chopping meat with the blade unit.

9 After processing, release the on/off button or the turbo speed button to switch off the

appliance. Then wait until the blade unit has stopped rotating.

10 Press the lid release button on the bowl (1) and turn the lid clockwise to remove it

(2). (Fig. 9)

Tips

- The appliance chops very quickly. If you use the turbo speed button, use it briey to prevent the

food from becoming too nely chopped.

- Do not let the appliance operate too long when you chop (hard) cheese or

chocolate. Otherwise these ingredients become too hot, start to melt and turn lumpy.

- Do not use the blade unit to chop very hard ingredients like coffee beans, turmeric, nutmeg and

ice cubes, as this may cause the blade unit to get blunt.

Combination disc

The combination disc is intended for slicing and shredding vegetables like cucumber, carrots,

potatoes, leek and onions and certain kinds of cheese. One side is intended for slicing and the other

side for shredding. You can switch from slicing to shredding and the other way round by simply

turning the disc.

Never process hard ingredients like ice cubes with the combination disc.

The cutting edges of the combination disc are very sharp. Do not touch them.

1 Place the tool holder in the bowl (Fig. 5).

2 Place the combination disc on the tool holder with the slicing or shredding side facing up,

depending on the result you want (Fig. 10).

3 Putthelidonthebowl(1).Turnthelidanticlockwise(2)toxit(‘click’)(Fig.7).

4 Put the ingredients in the feeding tube.

- Pre-cut large ingredients into chunks that t in the feeding tube.

- Fill the feeding tube evenly for the best results.

- When you have to process a large amount of ingredients, process small batches and empty the

bowl between batches.

- To shred cheese, e.g. Parmesan, Gouda or Emmentaler, the cheese should be at refrigerator

temperature.

5 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 8).

6 Press the on/off button or the turbo speed button to switch on the appliance.

ENGLISH 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips HR1619 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips HR1619 Manual

Product: