Manual Philips hr 7772 00 (page 8 of 136) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

380760

Zoom out

Zoom in

1/136

3 When you use the blade unit, the kneading accessory or the

balloon beater, put the ingredients to be processed in the bowl.

Note: Do not ll the bowl beyond the MAX indication.

4 Putthelidonthebowl(1).Turnthelidclockwise(2)toxit

(‘click’) (Fig. 3).

Note: Make sure the projection on the lid locks into the slot of the bowl

handle

5 When you use one of the discs, add the ingredients through the

feeding tube and push them down with the pusher.

6 Select the speed setting that corresponds with the colour of the

accessory in the bowl. See the appropriate section below.

7 Whenyouhavenishedprocessing,turnthespeedselectorto

0 (Fig. 4).

Feeding tube and pusher

- Use the feeding tube to add liquid and/or solid ingredients. (Fig. 5)

- Use the outer pusher to push solid ingredients down the feeding

tube. (Fig. 6)

- If the ingredients you are going to shred or slice have a small

diameter, put the outer pusher in the feeding tube to make the

feeding tube smaller. Then use the inner pusher to push the

ingredients down the feeding tube. (Fig. 7)

Tip: You can also use the inner and outer pusher to close the feeding tube.

This prevents ingredients from escaping through the feeding tube.

Blade unit

You can use the blade unit to chop, mix, blend or puree ingredients.

1 Remove the protective cover from the blade (Fig. 8).

The cutting edges are very sharp. Do not touch them.

2 Put the tool holder in the bowl. (Fig. 9)

3 Put the blade unit on the tool holder in the bowl (Fig. 10).

ENGLISH8

4 Put the ingredients in the bowl. Pre-cut large pieces of food into

piecesofapprox.3x3x3cm(Fig.11).

Note: Always put the tool holder with the blade unit in the bowl before you

add the ingredients.

5 Putthelidonthebowl(1).Turnthelidclockwise(2)toxit

(‘click’) (Fig. 12).

6 Put the pusher in the feeding tube.

7 Select the speed that corresponds with the colour of the

accessory (Fig. 13).

8 Whenyouhavenishedprocessing,turnthespeedselectorto0

and unplug the appliance (Fig. 4).

Tips

- When you chop onions, press the pulse button a few times to

prevent the onions from becoming too nely chopped (Fig. 14).

- Do not let the appliance run too long when you chop (hard) cheese

or chocolate. Otherwise these ingredients become too hot, start to

melt and turn lumpy.

- Do not use the blade unit to chop very hard ingredients like coffee

beans, turmeric, nutmeg and ice cubes, as this may cause the blade to

get blunt.

- The standard processing time for all chopping jobs is 30-60 seconds.

- If food sticks to the blade or to the wall of the bowl, switch off the

appliance and unplug it. Then use a spatula to remove the food from

the blade or from the wall of the bowl.

Kneading accessory

You can use the kneading accessory to knead yeast dough for bread and

pizzas.

The standard processing time for all kneading jobs is 30-180 seconds.

1 Put the tool holder in the bowl (Fig. 9).

2 Put the kneading accessory on the tool holder. (Fig. 15)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips hr 7772 00 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips hr 7772 00 Manual

Product: