ENGLISH16
Guarantee & service
If you need information or if you have a problem,
please visit the Philips Web site at
www.philips.com or contact the Philips Customer
Care Centre in your country (you will find its
phone number in the worldwide guarantee
leaflet). If there is no Customer Care Centre in
your country, turn to your local Philips dealer or
contact the Service Department of Philips
Domestic Appliances and Personal Care BV.
Application
times
10 - 60 sec.
10 - 60 sec.
10 - 60 sec.
60 - 240 sec.
60 - 120 sec.
10 - 60 sec.
Application
Chopping,
pureeing, mixing
Shredding, grating
Slicing
Kneading
Whisking,
whipping,
emulsifying,
mixing
Blending,
pureeing
Accessory
P
hjkh
¬
∂
ß
D
Function
¥
^
^
π
ø
†
Functions, accessories and applications
Solution
Turn the bowl or lid clockwise until you hear a click.
Make sure that the points on the bowl and on the lid
are placed directly opposite each other.
The automatic thermal cut-out system has probably cut
off the power supply to the appliance because it has
overheated. 1) Unplug the appliance. 2) Let the
appliance cool down for 60 minutes. 3) Put the mains
plug in the socket. 4) Switch the appliance on again.
Press the button for the process you want.
This appliance is equipped with a memory function. If
you restart the appliance within 40 seconds, the process
will start where it was interrupted. If you want the
process to start right from the beginning: 1) Briefly press
another process button (e.g. the pulse button) 2) Then
press the STOP button. 3) Press the appropriate
process button to make the process start all over again.
1) Make sure you have snapped the driving shaft into
the mixing bowl. 2) Make sure you have inserted the
gearwheel properly into the housing of the mixing
accessory. 3) Check if you have really turned the mixing
bowl clockwise as far as the point where you hear a
click.
If both the blender and the food processing bowl or
mixing bowl have been mounted correctly, only the
blender will function. If you want to use the food
processing bowl or the mixing bowl, detach the blender
and close the fixing hole with the screw cap.
The motor is already at its physical limit, i.e. during
kneading or when the speed is at the lowest defined
level where it can not be decreased further.
Problem
The appliance doesn't
switch on.
The appliance has
suddenly stopped
running.
You have pressed the
wrong process button.
The process doesn't
start at the beginning
after a restart of the
process
The kneading or
mixing accessory
doesn't turn.
Both the blender jar
and the food
processing bowl or the
mixing bowl are
attached, but only the
blender works.
The + and - button
does not react at
certain applications.
Troubleshooting guide
