380547
7
Zoom out
Zoom in
Previous page
1/202
Next page
ENGLISH 7
Thoroughly clean the parts that will come
into contact with food before you use the
appliance for the first time.
Do not exceed the quantities and preparation
times indicated in the table.
Do not exceed the maximum content
indicated on the food-processing bowl or
blender jar., i.e. do not fill beyond the top
graduation.
Unplug the appliance immediately after use.
Never use your fingers or an object (e.g. a
spatula) to push ingredients down the feed
tube while the appliance is running. Only the
pusher is to be used for this purpose.
Always unplug the appliance before reaching
into the blender jar with your fingers or an
object (e.g. a spatula).
Keep the appliance out of the reach of
children.
Never let the appliance run unattended.
The food-processing functions only work if
the dot on the screw cap is opposite the dot
on the motor unit, the dot on the bowl is
opposite the dot on the motor unit and the
line on the lid is opposite the line on the
bowl. If this is the case, the built-in safety lock
will be deblocked and the appliance can be
switched on.
Switch the appliance off before detaching any
accessory.
Always switch the appliance off by setting the
speed control to position 0.
Wait until moving parts have stopped running
before you remove the lid of the appliance.
Never immerse the motor unit in water or any
other liquid, nor rinse it under the tap. Use
only a moist cloth to clean the motor unit.
Remove the protective cover from the blade
before use.
Never use the cutter unit in combination with
the separator and sausage horn.
Do not attempt to grind bones, nuts or other
hard items.
Never reach into the tray with your fingers.
Always use the pusher.
Let hot ingredients cool down before
processing them in the blender jar (max.
temperature 80cC/175cF).
If you are processing a liquid that tends to
foam, do not put more than 1 litre in the
blender jar to avoid spillage.
For quantities and preparation times, please
consult the tables in these instructions for
use.
Note that it is not possible to use the food-
processing bowl when the blender jar is
mounted on the motor unit.
Noise level: Lc= 89 dB [A]
Using the appliance
Thermal safety cut-out
In order to avoid a hazardous situation, this
appliance must never be connected to a timer
switch.
If your appliance suddenly stops running:
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hr 7755 essence at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hr 7755 essence in the language / languages: English, Polish as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info