32
33
34
- Put the cone (AA) in place (fig. 31) and
press it home lightly.
- Turn on the food processor and set the
speed control to position 3 (fig. 32).
- Press one half of a citrus fruit firmly onto
the rotating cone (fig. 33).
• Stop pressing from time to time to remove
pulp from the sieve. When you do so,
switch off the appliance and remove the
bowl along with the sieve and the cone.
After use
- Remove the bowl along with the citrus
press accessories to prevent juice from
leaking onto the appliance.
- Remove the pulp from the cone and the
sieve.
- Rinse the bowl, cone and sieve
immediately after use. You can then wash
them in hot water with washing-up liquid or
put them in the dishwasher. Do not use any
abrasives, scouring pads, etc.
• Certain ingredients may cause
discolorations on the surface of the
accessories. This does not have a negative
effect; the discolorations usually disappear
after some time.
Juice extractor, general description
Juice extractor accessories
4
AC Filter AE Pusher
AD Pulp sieve AF Lid
The juice extractor accessories can only
be used with the Philips HR 7727 food
processor.
Assembly
- Put the bowl on the motor unit (fig. 2).
- Put the filter (AC) in the pulp sieve (AD)
(fig. 34).
- Put the pulp sieve in the right position
(fig. 35).
9
35
