400322
9
Zoom out
Zoom in
Previous page
1/120
Next page
5 HR2067/HR2066/HR2064/HR2061 only: close the lid.
6 Insert the measuring cup into the lid (Fig. 5).
7 To disassemble the blender, follow the instructions above in reverse order.

1 Put the mains plug in the wall socket.
2 Turn the control knob to the required speed setting or press the ice button (Fig. 6).
See the blender table at the end of this user manual for the recommended quantities, speed settings
and processing times.
Never reach into the jar with your ngers or an object (e.g. a spatula) while the blender is
running.
Do not let the appliance run for more than 3 minutes at a time. If you have not nished
processing after 3 minutes, switch the appliance off for one minute before you let it run again.
3 Turn the control knob to the pulse setting several times if you want to process ingredients
very briey.
Never use the pulse setting longer than a few seconds at a time.
4 Always switch the appliance off by setting the control knob to 0 before you open the lid.

- To prevent spillage, do not put more than 1.5 litres of liquid in the blender jar, especially when
you are processing at a high speed. Do not put more than 1 litre in the blender jar when you
are processing hot liquids or ingredients that tend to foam.
- You can use the opening in the lid to add ingredients while the motor is running (Fig. 7).
- Do not process dry ingredients for more than 1 minute.
- Cut solid ingredients into smaller pieces before putting them in the blender jar. Do not process
a large quantity of solid ingredients at the same time. Process these ingredients in a series of
small batches instead.
- If you are not satised with the result when blending solid ingredients, switch the blender off and
use the pulse setting a few times to let the blender run briey. You can also stir the ingredients
with a spatula (not while the blender is running!) or remove some of the contents of the jar and
process smaller amounts.
- To crush ice cubes put max. 5 cubes at a time in the jar and press the ice button a few times.
HR2074 only: The jar is made of glass and therefore breakable. Do not drop the jar on a hard
oor. Also avoid extreme thermal shocks. If the jar is very cold, rinse it well with lukewarm water
before pouring hot liquid into it. If the glass jar cracks, stop using it.

HR2061: You can order the lter from your Philips dealer.
You can use the lter to obtain extra nely blended sauces, fresh fruit juices or cocktails. All pips and
skins will be caught in the lter.
Never ll the lter beyond its metal part.
Do not use the lter to process hot ingredients.

1 Put the lter in the blender jar (Fig. 8).
Make sure the lter is properly tted onto the bottom of the jar.
 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hr 2074 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hr 2074 50 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info