399686

Philips hr 2024 Manual

10
Zoom out
Zoom in
Previous page
1/108
Next page
2 Place the rubber sealing ring on the mill blade unit. (Fig. 10)
Make sure that the sealing ring is placed correctly.
3 Put the mill blade unit on the mill beaker (1) and screw the blade unit anticlockwise (2) until
it is xed properly (Fig. 11).
4 Turn the assembled mill upside down and screw it clockwise onto the motor unit (‘click’)
(Fig. 12).
5 Put the mains plug in the wall socket.
6 Switch on the appliance and let it run until the ingredients are ne enough.
This takes approx. 10-30 seconds.

1 Unplug the appliance.
2 Screw the mill anticlockwise off the motor unit.
3 Turn the mill upside down and screw the blade unit clockwise off the mill beaker.
4 Clean all removable parts immediately after use (see chapter ‘Cleaning’).
Cleaning
Always unplug the appliance before you clean it.
Never immerse the motor unit in water, nor rinse it under the tap. Do not clean the motor unit
in the dishwasher.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
Tip: Cleaning the appliance and its parts is easiest immediately after use.
1 Make sure the appliance is unplugged.
2 Disassemble all removable parts.
Do not forget to remove the blender sealing ring and the mill sealing ring (HR2027/HR2021
only).
Do not touch the blades. The blades are very sharp.
3 Clean the motor unit with a moist cloth.
4 Clean the removable parts in hot water with some washing-up liquid.
Note: All parts except the motor unit can be cleaned in the dishwasher.
Storage
Note: Make sure the blender is clean and dry when you store it.
1 To store the mains cord, wind it round the reel in the base of the motor unit (Fig. 13).
2 Screw the blade unit anticlockwise onto the bottom of the blender jar.
3 Turn the blender jar upside down.
4 Put the blender jar on the motor unit.
Note: Make sure the handle of the blender jar is at the back of the motor unit.
5 Place the lid on top of the blender jar (Fig. 14).
ENGLISH10
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hr 2024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hr 2024 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info