399441
9
Zoom out
Zoom in
Previous page
1/108
Next page
3 Turn the blender jar with the blade unit attached anticlockwise to remove it from the motor
unit.
4 Clean all removable parts immediately after use (see chapter ‘Cleaning’).
Filter (HR2027/HR2024 only)
With the lter you can make delicious fresh fruit juices, cocktails or soy milk. The lter prevents pips
and skins from ending up in your drink.
Never overload the lter. Do not put more than 70g of soy beans (unsoaked weight) or 150g of
fruit in the lter at the same time.

1 Mount the blender jar with the blade unit attached on the motor unit. Turn the blender jar
clockwise to x it (‘click’) (Fig. 4).
The blender jar can be mounted in two positions: with the handle on the right side or on the left
side.
2 Put the lter in the blender jar (Fig. 6).
Make sure that the grooves of the lter t exactly onto the ribs inside the blender jar.
3 Put the mains plug in the wall socket.

1 Place the lid on the blender jar.
2 Put the ingredients in the lter. (Fig. 7)
Do not exceed the MAX indication on the sieve mesh.
3 Pour water or another liquid (milk, juice, etc.) into the blender jar.
4 Insert the measuring cup into the hole in the lid.
5 Let the appliance run for approx. 40 seconds.
6 Switch off the appliance and remove the blender jar with the blade unit attached from the
motor unit.
Do not remove the lid. Leave the measuring cup and the lter in the jar.
7 Pour out the drink through the pouring lip of the blender jar. (Fig. 8)
Tip: For optimal results, put the jar with the remaining ingredients back onto the appliance and let it run
for a few more seconds.
Note: When you process a large quantity, we advise you not to put all the ingredients in the lter at the
same time. Start to process a small quantity and let the appliance run for a few seconds. Then switch off
the appliance and add another small quantity. Repeat this procedure until you have processed all the
ingredients. Always keep the lid on the blender jar during processing.
8 Clean all removable parts immediately after use (see chapter ‘Cleaning’).
Mill (HR2027/HR2021 only)

1 Put the ingredients in the mill beaker (Fig. 9).
You can process wet and dry ingredients.
Do not ll the mill beaker beyond the MAX indication.
ENGLISH 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hr 2020 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hr 2020 70 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info