Introduction
The appliance is equipped with built-in safety systems:
- The appliance does not function if the accessories have been assembled incorrectly or have not
been assembled at all.
- Never switch the appliance on or off by turning the accessories.
General description
B
Blender:
A Stopper
B Lid
C Opening in lid
D Pouring spout
E Blender jar
F Level indications
G Rubber sealing ring
H Blade unit
I Safety lock
J M = Pulse ("Moment")/Quick Clean button
K Speed buttons
- 3: high speed
- 2: normal speed
- 1: low speed
- 0 : Off
L Rubber suction feet/cord storage facility
B
Fruit Filter:
M Fruit filter
Safety notice
- Always unplug the appliance from the mains before assembling, disassembling or making
adjustments to any of the accessories.
- Keep the appliance out of the reach of children.
- The motor only starts if the blender jar attachment has been correctly assembled onto the motor
unit.
- Make sure the blade unit is securely fastened onto the blender jar before you screw the
attachment onto the motor unit.
- Never touch the blade unit when it is assembled on the appliance and the appliance is plugged in.
- Avoid touching the cutting edges of the blade units when cleaning them.They are very sharp and
you could easily cut your fingers on them.
- To reduce the risk of injury, never place the blade unit onto the motor unit without having
attached the blender jar or mill beaker properly.
Important
Read these instructions for use carefully before using the appliance and save them for future
reference.
General
◗ Check if the voltage indicated on the appliance corresponds to the local mains voltage (110-
127 volts or 220-240 volts) before you connect the appliance.
◗ Never use any accessories or parts from other manufacturers or that have not been
specifically advised by Philips.Your guarantee will become invalid if such accessories or parts
have been used.
ENGLISH6
