400666
10
Zoom out
Zoom in
Previous page
1/48
Next page
2 Do not fill the jar beyond the "MAX" indication.
3 Put the larger sealing ring (I) on the blade unit of the mill (J) (fig. 10).
Make sure that the rubber sealing ring has been placed correctly.
4 Screw the blade unit on the jar by turning it clockwise (fig. 11).
5 Hold the assembled mill upside down and screw it onto the motor unit (A) by turning it
clockwise until you hear a 'click' (fig. 12) .
6 Make sure that the appliance is plugged in.
7 Switch the appliance on and let it run until the ingredients are fine enough.This will take
approx. 10-30 seconds.
Disassembling the mill
1 Unplug the appliance.
2 If the mill is still attached to the motor unit, remove the mill from the motor unit by turning
it anticlockwise.
3 Place the mill upside down, unscrew the jar (anti-clockwise) and then remove the blade unit.
4 Always clean the removable parts immediately after use.
Cleaning
We advise you to clean the removable parts immediately after use.
Always unplug the appliance before cleaning.
Never clean the motor unit, the blade units, the filter and the sealing rings in the dishwasher.
Always disassemble all removable parts before cleaning them. Do not forget to remove the
sealing rings from the blade units (blender and mill).
Avoid touching the blades.The blades are very sharp.
The blender and mill jar (without blade unit), lid and measuring cup are dishwasher-proof.
Motor unit
Clean the motor unit with a moist cloth. Do not rinse the motor unit under the tap. Do not
use abrasives, scourers, alcohol, etc.
Storage
You can store excess mains cord by winding it round the base of the motor unit.
Environment
Do not throw the appliance away with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this you will help to preserve
the environment (fig. 13).
Guarantee & service
If you need information or if you have a problem, please visit the Philips Web site at
www.philips.com or contact the Philips Customer Care Centre in your country (you will find its
phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your
country, turn to your local Philips dealer or contact the Service Department of Philips Domestic
Appliances and Personal Care BV.
ENGLISH10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hr 1720 comfort at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hr 1720 comfort in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info