Manual Philips hr 1568 (page 2 of 7) (English, Portuguese, Spanish)

399683

Zoom out

Zoom in

1/7

ENGLISH

Introduction

Congratulations on your purchase and welcome to Philips! To fully benet from the

support that Philips offers, register your product at www.philips.com/welcome.

General description (Fig. 1)

A On/off switch and speed selector (5 speeds + turbo setting)

B Eject button

C Motor unit

D Cord storage facility

E Cord clip for xing the cord

F Kneading hooks (HR1568/HR1566 only)

G Beaters

H Vibration disc (HR1568/HR1566 only)

I Spatula (HR1568/HR1566 only)

J Sieve (HR1568/HR1566 only)

K Mixer holder

L 3.5-litre glass bowl (HR1568 only)

M 3.5-litre bowl (HR1566/HR1564 only) with lid (HR1566 only)

N 1.8-litre bowl with lid (HR1566 only)

O Rotating plate (HR1568 only)

P Stand

Q Holder release button

Important

Read this user manual carefully before you use the appliance and save it for future

reference.

Danger

- Do not immerse the motor unit in water nor rinse it under the tap.

Warning

- Check if the voltage indicated on the bottom of the appliance corresponds to

the local mains voltage before you connect the appliance.

- Do not use the appliance if the mains cord, the plug or other parts are damaged.

- If the mains cord is damaged, you must have it replaced by Philips, a service

centre authorised by Philips or similarly qualied persons in order to avoid a

hazard.

- This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the

appliance.

Caution

- Always insert the beaters or the kneading hooks (HR1568/HR1566 only) into

the mixer before you connect it to the mains.

- Lower the beaters or kneading hooks (HR1568/HR1566 only) into the

ingredients before you switch on the appliance.

- Unplug the mixer before you remove the beaters or kneading hooks (HR1568/

HR1566 only) and before you clean it.

- This appliance is intended for household use only.

- Never use any accessories or parts from other manufacturers or that Philips

does not specically recommend. If you use such accessories or parts, your

guarantee becomes invalid.

- Do not let the appliance run for more than 10 minutes without interruption. If

you want to process large quantities of ingredients, let the appliance cool down

rst before you continue.

- Do not clean the plastic parts of this appliance in the dishwasher. They are not

dishwasher proof.

- Do not use a beater and a kneading hook (HR1568/HR1566 only) or two

different types of beaters to mix or knead ingredients.

- HR1568 only: to avoid thermal shocks, do not put the hot glass bowl on a cold

surface or clean it in cold water immediately after you have removed it from the

oven or microwave. Do not place the glass bowl in the refrigerator when it is still

hot or place the glass bowl in a hot oven straight from the refrigerator.

- HR1568 only: be careful when you handle the glass bowl. It may break if you

drop it.

Electromagnetic elds (EMF)

This Philips appliance complies with all standards regarding electromagnetic elds

(EMF). If handled properly and according to the instructions in this user manual, the

appliance is safe to use based on scientic evidence available today.

Using the appliance

Mixing without the stand

1 Insert the beaters or kneading hooks (HR1568/HR1566 only) into the mixer

(‘click’). If necessary, slightly turn the beaters or kneading hooks while you do

this (Fig. 2).

Insert the beater or kneading hook with the blue collar into the larger opening and

the one with the large white octagonal collar (HR1568/HR1566 only) or the brown

collar (HR1564 only) into the smaller opening.

2 Put the plug in the wall socket.

3 Put the ingredients in a bowl.

- For the best results, rst put the liquid ingredients in the bowl and then add the

dry ingredients.

- For the right quantities and processing times, see section ‘Quantities and

processing times’ below.

4 Lower the beaters or kneading hooks (HR1568/HR1566 only) into the

ingredients and switch on the mixer. (Fig. 3)

If you want to stop mixing for a while, switch off the appliance and put it (with the

beaters or kneading hooks still attached) on its heel until you continue.

5 Whenyouhavenishedmixing,switchofftheapplianceandremovetheplug

from the wall socket.

6 Press the eject button to release the beaters or kneading hooks (HR1568/

HR1566 only) and remove them from the mixer (Fig. 4).

Mixing on the stand

1 Place the mixer on the stand (Fig. 5).

First t the front of the mixer into the snap hook at the front of the mixer holder and

then press down the rear end of the mixer (‘click’).

2 Press the holder release button and tilt the holder with the mixer

backwards (Fig. 6).

3 Insert the beaters or kneading hooks (HR1568/HR1566 only) into the mixer

(‘click’). If necessary, slightly turn the beaters or kneading hooks while you do

this (Fig. 7).

Insert the beater or kneading hook with the blue collar into the larger opening and

the one with the large white octagonal collar (HR1568/HR1566 only) or the brown

collar (HR1564 only) into the smaller opening.

4 Put the plug in the wall socket.

5 Put the ingredients in the bowl.

- For the best results, rst put the liquid ingredients in the bowl and then add the

dry ingredients.

- For the right quantities and processing times, see section ‘Quantities and

processing times’ below.

6 Place the bowl on the stand. (Fig. 8)

7 Press the holder release button and move the holder with the mixer on it

into horizontal position so that the beaters or kneading hooks (HR1568/

HR1566 only) are lowered into the ingredients (Fig. 9).

8 Switch on the mixer.

9 Whenyouhavenishedmixing,switchofftheapplianceandremovetheplug

from the wall socket.

10 Press the holder release button and tilt the holder with the mixer on it

backwards (Fig. 10).

11 Press the eject button to release the beaters or kneading hooks (HR1568/

HR1566 only) and remove them from the mixer (Fig. 11).

12 Press the mixer release lever at the rear end of the mixer holder (1) and lift

the mixer off the holder (2) (Fig. 12).

Using the sieve (HR1568/HR1566 only)

You can use the sieve to remove lumps and impurities from ingredients such as our,

sugar or cacao. When the mixer is operating, the vibration disc shakes the sieve. The

ingredients in the sieve are thus added nely and uniformly, which ensures a softer

and more homogeneous result.

1 Place the mixer on the stand and place the bowl with liquid ingredients on the

stand.

2 Insert the beater with the blue collar into the larger opening and the one

with the large white octagonal collar (i.e. the vibration disc) into the smaller

opening (Fig. 13).

Note: You can only use the sieve together with the beaters.

3 Press the holder release button and move the holder with the mixer on it

into horizontal position so that the beaters are lowered into the ingredients.

4222.005.0097.1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips hr 1568 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips hr 1568 Manual

Product: