400962
9
Zoom out
Zoom in
Previous page
1/92
Next page
10 Press the lid release button on the bowl (1) and turn the lid clockwise to remove it
(2). (Fig. 11)

- The appliance chops very quickly. Use the normal speed button or the turbo speed button. If
you use the turbo speed button, use it briey to prevent the food from becoming too nely
chopped.
- Do not let the appliance run too long when you chop (hard) cheese or chocolate. Otherwise
these ingredients become too hot, start to melt and turn lumpy.
- Do not use the blade unit to chop very hard ingredients like coffee beans, turmeric, nutmeg and
ice cubes, as this may cause the blade to get blunt.

The combination disc is intended for slicing and shredding vegetables like cucumber, carrots,
potatoes, leek and onions and certain kinds of cheese. One side is intended for slicing and the other
side for shredding. You can switch from slicing to shredding and the other way round by simply
turning the disc.
Never process hard ingredients like ice cubes with the disc.
The cutting edges of the disc are very sharp. Do not touch them.
1 Place the tool holder in the bowl (Fig. 7).
2 Place the combination disc on the tool holder with the slicing or shredding side facing up,
depending on the result you want. (Fig. 12)
3 Put the lid on the bowl (1). Turn the lid anticlockwise (2) to x it (‘click’) (Fig. 9).
4 Put the ingredients in the feeding tube.
- Pre-cut large ingredients into chunks that t in the feeding tube.
- Fill the feeding tube evenly for the best results.
- When you have to process a large amount of ingredients, process small batches and empty the
bowl between batches.
- To shred cheese, e.g. Parmesan, Gouda or Emmentaler, the cheese should be at refrigerator
temperature.
5 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 10).
6 Press and hold the normal or turbo speed button to switch on the appliance (Fig. 4).
7 Press the pusher lightly onto the ingredients in the feeding tube.

The whisk is intended for whipping cream, whisking egg whites, desserts etc.
1 Connect the whisk to the coupling unit (Fig. 13).
2 Connect the coupling unit to the motor unit (‘click’) (Fig. 14).
3 Put the ingredients in a bowl.
Tip: Use a large bowl for the best result.
 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hr 1377 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hr 1377 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info