60681
9
Zoom out
Zoom in
Previous page
1/116
Next page
As the table shows, the rst session of a tanning course must always last 7 minutes, irrespective
of the sensitivity of the skin.
If you think that the sessions are too long for you (e.g. because your skin feels taut and tender after
the session), we advise you to reduce the length of the sessions by e.g. 5 minutes.
Duration of the tanning
session for each separately
treated part of the body
For persons with
very sensitive skin
For persons with
normal sensitive
skin
For persons with
less sensitive skin
1st session 7 minutes 7 minutes 7 minutes
rest of at least 48 hours
2nd session 10 minutes 20 minutes 30 minutes*
3rd session 10 minutes 20 minutes 30 minutes*
4th session 10 minutes 20 minutes 30 minutes*
5th session 10 minutes 20 minutes 30 minutes*
6th session 10 minutes 20 minutes 30 minutes*
7th session 10 minutes 20 minutes 30 minutes*
8th session 10 minutes 20 minutes 30 minutes*
9th session 10 minutes 20 minutes 30 minutes*
10th session 10 minutes 20 minutes 30 minutes*
*) or longer, depending on your skin sensitivity.
Preparing for use
You can easily move and store the appliance in transport position.
The appliance is easier to lift if you do so together with another person (Fig. 2).
If you have to lift the appliance by yourself, use the handle (Fig. 3).
1 To open the appliance, move the slides in the direction of the arrow (Fig. 4).
2 Pull up the stand and the lamp unit (Fig. 5).
3 Put the tanning appliance in the position indicated (Fig. 6).
4 Pull up the lamp unit to horizontal position. Use the handle to do this. (Fig. 7)
You hear clicks when you move the lamp unit past certain xed positions.
Note: Instead of using the above step-by-step method, you can also pull the lamp unit up by its handgrip
in one single movement (Fig. 8).
5 Turn the lamp unit a quarter turn (Fig. 9).
6 Place the tanning appliance beside a bed. (Fig. 10)
The distance between the UV lter and the surface on which you are lying down (e.g. the bed)
must be 90cm.
7 Slide the collar down the stand to unlock the height adjustment lock. Pull up the lamp unit at
the same time to a height of 90cm above the bed. Let go of the collar to lock the lamp unit
into position (Fig. 11).
You can check the distance between the lamp unit and the bed by pulling out the measuring
tape.
-
-
-
-
ENGLISH 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HP8540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HP8540 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info