666626

Philips HP3621 Manual

10
Zoom out
Zoom in
Previous page
1/64
Next page
- For a cosmetic treatment, place the appliance on a table and sit down on a chair in front of the
appliance. Tilt the lamp housing backwards so that the beam of light is directed towards your
face (Fig. 11).
3 To adjust the direction of the light beam, tilt the lamp housing forwards or
backwards (Fig. 12).
4 Sit or lie down at the right distance from the appliance.
- At a distance of 25-30cm to the body, the InfraCare treats an area of about 30cm by 20cm
(w x h). At a larger distance, the area treated becomes larger and the infrared light and
therefore the heat less intense. At a smaller distance, the area treated is smaller and the infrared
light and therefore the heat more intense.
- Make sure the distance between your body and the appliance is large enough to prevent
accidental contact with the hot lter.
- Choose a distance at which the heat is comfortable and increase the distance if
the heat becomes too intense.
Note: The heat of the appliance does not reach its full intensity until several minutes after you switch on
the appliance. This does not mean, however, that the appliance is not effective during these rst minutes.
Duration of treatment
The duration of the treatment depends on the type of treatment and the person to be treated.
Treatment of a single muscle or joint should last approximately 15 minutes. If necessary,
the treatment can be repeated several times a day. A longer treatment time than 15 minutes does
not lead to better results. You can repeat the course of several treatments a day on several
consecutive days to get a result. If there is no improvement after 6-8 treatments, stop using the
appliance and consult your doctor. For chronic problems, the appliance can be used for longer
periods of time, as long as you follow the instructions given in the ‘Warning’ section in chapter
‘Important’.
Using the InfraCare
1 Put the mains plug in the wall socket.
2 Press the on/off button to switch on the appliance.
3 After use, press the on/off button to switch off the appliance.
Cleaning
Unplug the appliance and let it cool down for about 15 minutes before you clean it.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
1 Clean the lamp housing and the base with a moist cloth. Do not let any water run into the
appliance.
2 Youcancleantheoutsideofthelterwithasoftclothsprinkledwithsomemethylated
spirits.
Storage
Donotletthemainscordcomeintocontactwiththelterwhenthelterishot.
1 Unplug the appliance and let it cool down for about 15 minutes before you store it.
- Always lift or carry the appliance by its handgrip (Fig. 13).
2 Store the InfraCare in a dry place.
ENGLISH10
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HP3621 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HP3621 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info