Manual Philips HP 8560 (page 12 of 204) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

61092

Zoom out

Zoom in

1/204

9 Press the START/STOP button to switch on the tanning lamps or the infrared lamps (Fig. 14).

Note: It can take a few seconds for the lamps to go on. This is normal.

10 A ashing dot appears on the display next to the time. (Fig. 15)

The countdown of the set tanning or relax time starts.

Last minute

The appliance beeps during the last minute of the session.

During the last minute, you can repeat the set time. Press the repeat button ( ä). (Fig. 16)

Note: The display shows the set time and starts to count down. The appliance stops beeping.

During the last minute, you can set a new time. Turn the time-selection ring to the desired time

(1) and then press the START/STOP button (2). (Fig. 17)

Note: By setting a new time, you can avoid the 3-minute waiting time which is necessary to let the

tanning lamps cool down after they have switched off. This 3-minute waiting time does not apply to the

infrared lamps.

During the last minute of the tanning or relax session, you can press the SNOOZE button to

enjoy the warmth of the infrared lamps for 9 more minutes. You can press the SNOOZE button

as often as you like. (Fig. 18)

Adjusting functions

The function selection button shows the different functions. (Fig. 19)

1 Press the function selection button to switch from function to function. (Fig. 20)

The symbol that turns yellow shows the function you have selected.

2 Choose:

symbol ¥ if you want to tan your whole body

symbol ¼ if you want to tan a specic part of your body*

symbol ‚ if you want to relax

symbol × if you want to warm up a part of your body*

* One side of the lamp unit goes on.

Setting the time for a tanning or relax session.

1 Consult the chapters ‘Tanning and your health’ and ‘Relaxation and your health’ for the

correct tanning or relax time.

2 Turn the time-selection ring to set the time of the tanning or relax session (Fig. 21).

Turn the ring clockwise to increase the time and turn it anticlockwise to decrease the time.

Interrupting the tanning or relax session

To interrupt a tanning session, press the pause button ( ã). (Fig. 22)

The lamps go out. The cool-down time of 3 minutes ashes on the display and counts down. During

these 3 minutes, the lamps cool down. When the time has counted down to 0 and stops ashing,

you can switch the appliance back on. Press the START/STOP button or the pause button ( ã) to

start the countdown of the remaining session time.

To interrupt a relax session, press the pause button ( ã). (Fig. 23)

The lamps are switched off and the pause symbol and the remaining time appear on the display. The

waiting time does not apply to the infrared lamps, so you can switch the appliance back on

whenever you want. Press the STOP/START button or the pause button ( ã) to start the

countdown of the remaining time.

Changing the tanning or relax time during a session

To change the set time during a tanning session, press the START/STOP button (Fig. 24).

The lamps are switched off. Set a new time with the time-selection ring. Wait until the set time stops

ashing (this takes 3 minutes because the lamps have to cool down rst). Then press the START/

ENGLISH12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips HP 8560 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips HP 8560 Manual

Product: