Manual Philips hp 6509 (page 3 of 9) (English, German, Dutch, French)

428956

Zoom out

Zoom in

1/9

Cleaning and maintenance

Note: Make sure the appliance is switched off and

unplugged before you start to clean it.

Never use scouring pads, abrasive cleaning agents or

aggressive liquids such as petrol or acetone to clean the

appliance.

Never rinse the appliance or the adapter under the

tap (Fig. 15).

Keep the appliance and the adapter dry (Fig. 16).

Cleaning the attachments

1 Remove the hair-lifting attachment with massage

element from the epilating head (Fig. 17).

Remove the shaving head comb attachment by

pulling it off the shaving head (Fig. 18).

2 Remove loose hairs from the attachments.

3 Rinse the attachments under the tap while turning

them.

4 Dry the attachments before you use or store them.

Cleaning the epilating head

1 Push the epilating head in the direction of the

arrows on the back of the appliance (1) and remove

it (2) (Fig. 9).

2 Remove loose hairs with the cleaning

brush (Fig. 19).

3 Rinse the epilating head under the tap for 5-10

seconds while turning it (Fig. 20).

4 Shake the epilating head rmly (Fig. 21).

Dry the epilating head thoroughly with a tea towel.

Note: Make sure the epilating head is completely dry before

you place it back onto the appliance.

Cleaning the shaving head

1 Push the shaving head in the direction of the

arrows on the back of the appliance (1) and remove

it (2). (Fig. 22)

2 Remove the shaving foil from the shaving

head. (Fig. 23)

3 Rinse the shaving foil and the inside of the shaving

head under the tap for 5-10 seconds while turning

them (Fig. 24).

4 Shake the shaving foil and shaving

head rmly (Fig. 25).

Dry the shaving foil and shaving head thoroughly with a

tea towel.

Note: Do not exert any pressure on the shaving foil to avoid

damage.

Note: Make sure the shaving foil and shaving head are

completely dry before you place it back onto the appliance.

5 Put the protection cap on the shaving head.

Tip: Rub a drop of sewing machine oil onto the shaving foil

twice a year.

Replacement

All parts of the appliance can be replaced. If you need to

replace one or more of the following parts, go to your

Philips dealer or an authorised Philips service centre:

appliance itself

epilating head

hair-lifting attachment with massage element

shaving head

shaving comb

cleaning brush

adapter

Environment

Do not throw away the appliance with the normal

household waste at the end of its life, but hand it in

at an ofcial collection point for recycling. By doing

this, you help to preserve the environment (Fig. 26).

Guarantee & service

If you need service or information or if you have a problem,

please visit the Philips website at www.philips.com or

contact the Philips Consumer Care Centre in your

country (you nd its phone number in the worldwide

guarantee leaet). If there is no Consumer Care Centre in

your country, go to your local Philips dealer.

Troubleshooting

This chapter summarises the most common problems

you could encounter with the appliance. If you are unable

to solve the problem with the information below, contact

the Consumer Care Centre in your country.

Problem Cause Solution

Poor epilating

results.

You move the

appliance in the

wrong direction.

Move the appliance

against the direction of

hair growth, with the

on/off slide pointing in

the direction in which

you move the appliance.

You place the

epilating head on

the skin at the

wrong angle.

Make sure that you

place the appliance on

the skin at an angle of

90° (see chapter ‘Using

the appliance’).

You used a

(depilatory)

cream prior to

epilation.

Make sure your skin

is clean, entirely dry

and free from grease.

Do not use any cream

before you start

epilating.

The hairs are too

short.

Sometimes hairs are too

short to be caught. The

optimal length for easy

removal of the hairs is

3-4mm. The hairs that

are not caught during

this session will be long

enough to be removed

when you epilate the

next time. You can also

try to catch the hairs by

moving the appliance

across the skin a few

more times.

The appliance

does not work.

The socket

to which the

appliance is

connected is

not live.

Make sure the socket

is live. If you have

connected the epilator

to the socket in a

bathroom cabinet, you

may need to switch on

the bathroom light to

activate the socket.

I cannot select

speed setting II.

The shaving head

is attached. The

shaving head can

only be used at

speed setting I.

Select speed setting

I when you use the

shaving head.

I cannot

remove the

shaving

head/epilating

head from the

appliance.

You try to pull it

straight off.

Push the epilating head/

shaving head in the

direction of the arrows

on the back of the

appliance before you

pull it off the appliance

(see chapter ‘Cleaning

and maintenance’).

4203.000.4268.1

3/9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips hp 6509 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips hp 6509 Manual

Product: