2 Remove the skin cooler from the appliance and slide the
protective sleeve off the skin cooler.
3 Clean the skin cooler, the appliance and the protective sleeve
with a moist cloth.
4 Clean the pivoting cooling head of the leg skin cooler with a
brush or moist cloth after each use (fig. 15).
Make sure the outside of the skin cooler is completely dry before
freezing it again.
5 Remove the epilating head (fig. 12).
Grab the epilating head by the ribbed sections and move it in the
direction of the arrow indicated on the epilating head.
6 Clean all accessible parts and the epilating discs with the brush
(fig. 16).
Never try to detach the epilating discs from the appliance.
7 Place the epilating head on the appliance and move it against the
direction of the arrow indicated on the epilating head until it
snaps home (fig. 17).
The epilating head can only be fitted onto the appliance in one way.
Cleaning the shaving head (HP6479 and HP6475 only)
1 Make sure the appliance is switched off and unplugged.
2 Remove the shaving foil.
3 Clean the hair chamber and the cutter block with the brush
(fig. 18).
Do not exert pressure on the shaving foil to avoid damaging it.
◗ Rub a drop of sewing machine oil onto the trimmers and shaving
foil of the shaving head twice a year.
ENGLISH12
