423836

Philips hfc 141 Manual

43
Zoom out
Zoom in
Previous page
1/52
Next page
– 41 –
TROUBLE-
SHOOTING
Problems when establishing a connection
Possible cause RemedyError
TRANSM. ERROR
CHECK
DISPLAY
Error report
The telephone connection is of poor
quality.
The recipient has a paper jam or has run
out of paper.
Try again.
Call your fax correspondent.
NO CONNECTION
or
REDIAL FAILED
Your fax correspondent’s line is busy,
does not answer or a different device
answers.
Try later or draw your fax
correspondent’s attention to a possible
installation fault.
NO LOOP CURRENT
Your fax machine is not properly installed
or not properly plugged in.
Check the installation of your fax
machine.
NO DIALTONE
You are connected to a PABX system.
You have connected your telephone
cable to socket on the bottom of your fax
machine identified with EXT.
Check the settings in function 15.
Connect your telephone cable to the
socket on the bottom of your fax
machine identified with LINE.
When you lift the handset of your
fax machine you do not hear the
dial tone.
You have connected the telephone cable
to the socket on the bottom of your fax
machine identified with EXT.
Connect your telephone cable to the
socket on the bottom of your fax
machine identified with LINE.
busy
or
fax transmissions are constantly
interrupted.
Your fax correspondent has a fax
machine that cannot receive the usual
standard identifying signals.
Try to send the fax manually: press the
DIAL or LOUDSPEAKER key and dial
the fax number. You will hear the call
being established. If the receiver is using
an automatic answering machine, wait
until you hear a tone after the
prerecorded message and then press the
START key.
You cannot phone or send faxes. Wrong dialling mode selected.
You are operating your fax machine on a
private branch exchange and have not
set it accordingly.
Change the dialling mode with
function 15.
In Function 15, select PABX: Yes.
You cannot receive any faxes
(you have set the ringing signals
with EXPERT mode).
You have set the total number of rings
(TOTAL RINGS: _) to a too high value.
For many fax machines, the call
establishment procedure is too long, and
transmission is interrupted.
Set the total rings or the tollfree rings to a
lower value than five in function 31 or 32
FAX:EXPERT.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hfc 141 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hfc 141 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips hfc 141

Philips hfc 141 User Manual - German - 50 pages

Philips hfc 141 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info