598240
8
Zoom out
Zoom in
Previous page
1/68
Next page
Note: The appliance may produce a smell the rst few times you charge it. This is normal.
, Whenthebatteryisfullycharged,thelightringgoesout.
Candlelight set
Charge the candlelight set for 12 hours.
When the candles are fully charged, they have an operating time of approx. 24 hours.
1 Insert the small plug into the charger and put the adapter in the wall socket.
, The charging light on the charger goes on (Fig. 3).
2 Put one or more candles on the charger (Fig. 4).
, Whenthecandlesarefullycharged,thecharginglightonthechargergoesoutandthe
charging process stops.
Note: The candles may go on when you put them on the charger. If they do, remove the candles from the
charger and tilt them to switch them off. Then put the candles back onto the charger.
Note: For safety reasons, a built-in timer stops the charging process after 12 hours, when the batteries
are fully charged. If you have one or more uncharged candles left and want to charge them right away,
press the button on the charger to start another charging cycle. When you do this, the charging light goes
on again.
Preparing for use
Massager
Cleaning
Thoroughlycleanthemassagerbeforerstuse,aftereveryuseandwhenyouuseitonanother
bodyarea,toreducetheriskofinfection(seechapter‘Cleaning’).
Pre-warming the massager
The charger has a pre-warming button that you can use to pre-warm the bottom of the massager
to a comfortable temperature (approx. 40°C).
Never warm the massager in an oven or microwave.
1 Placethemassageronthecharger.Itonlytsproperlyonthechargerwiththebuttonsfacing
up.
2 Press the pre-warming button (Fig. 5).
, Thepre-warminglightringstartsashingtoindicatethatthemassageriswarmingup.
, Afterapprox.5minutes,thepre-warminglightringstopsashingandlightsupcontinuously
toindicatethatthemassagerhasreachedacomfortabletemperature.
, After30minutes,thepre-warmingfunctionautomaticallyswitchesoff,butyoucanalso
switchitoffbypressingthepre-warmingbuttonagain.
Using the appliance
Massager
1 Press any button to switch on the massager (Fig. 6).
, The light ring goes on.
, Themassagerstartsoperatinginthedefaultmode(mode1)andatmoderatevibration
speed.
Tip: We advise you to start in the default mode. You can gradually increase the vibration speed once you
are familiar with the options.
Note: If you feel uncomfortable during use, you can adjust the vibration speed. See step 3.
ENGLISH8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HF8430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HF8430 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info