Manual Philips HF3480 (page 9 of 108) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

670751

Zoom out

Zoom in

1/108

You can choose a light intensity between 1 and 20.

Note: It takes approx. 1 second for the lamp to go on. This is normal, the lamp needs to heat up.

Note: The light intensity you have selected is automatically set as the light intensity level for the alarm as

well.

Tip: When you use the appliance for the rst time, set the light intensity to 20. The moment you wake up,

check which light intensity level the appliance has reached by slightly moving the top function selector up

or down. When you do this, the current alarm light intensity level appears on the display. Set the alarm

light intensity to this level for the next day.

2 To switch off the lamp, press the top function selector again.

Note: When you want to check the light intensity without switching on the lamp, you can also move

the top function selector up or down to select a setting without pressing the function selector rst.

Setting the alarm

When you set the alarm, you choose an alarm time and the type of sound you want to wake up to.

The alarm is set when the alarm symbol is visible on the display. The light intensity slowly increases

to the selected level during the last 30 minutes before the set alarm time. The sound slowly

increases in 90 seconds to the selected level after the set alarm time.

Note: You can set the light intensity by turning the top function selector up or down and you can set the

alarm volume by moving the bottom function selector up or down. If you do not want to wake up to the

lamp or to a sound, select a light intensity or volume level of 0. See sections ‘Using the lamp’ and ‘Radio/

Volume’ in this chapter.

1 Push the control lever down to the middle position to switch on the alarm. (Fig. 8)

, The hour indication of the alarm time ashes (Fig. 9).

, To adjust the time, follow steps 2 to 5. If the alarm time is correct, just wait a few seconds.

2 Move the middle function selector (SET) up or down to select the hour.

Note: You can only do this when the hour indication ashes. If this is not the case, push the control lever

up and down again to enter the alarm time mode. You can also set the alarm time in the menu. See

section ‘Menu functions of middle function selector (SET)’ in this chapter.

3 Press the middle function selector (SET) to conrm.

, The minute indication of the alarm time starts to ash (Fig. 10).

4 Move the middle function selector (SET) up or down to select the minutes.

5 Press the middle function selector (SET) to conrm or wait for a few seconds.

, The appliance leaves the menu and the display shows the clock time.

The alarm time is now set.

Switching off the alarm

To switch off the alarm function, push up the control lever to the top position.

Note: The lamp stays on. You can switch off the lamp by pressing the top function selector.

Note: The alarm (sound and/or light) automatically switches off after 90 minutes.

Setting the alarm sound

See section ‘Menu functions of middle function selector (SET)’ above.

You can choose one of the following sounds:

- Radio (Fig. 11)

- Birds (Fig. 12)

- Beep (Fig. 13)

- African jungle (Fig. 14)

ENGLISH 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips HF3480 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips HF3480 Manual

Product: