670749
8
Zoom out
Zoom in
Previous page
1/108
Next page
Note: Be aware that, if you do not turn the wheel for 5 seconds when you are in the menu (SET), the
appliance automatically leaves the menu and displays the clock time again.
You can operate the function selection wheels in the following way:
1 Press one of the function selection wheels to activate the selection mode (Fig. 5).
2 Turn the same function selection wheel up and/or down to select a setting (Fig. 6).
Note: You can also turn the top wheel (light intensity wheel) and the bottom wheel (volume wheel) up
and down to select a setting without pressing the wheel rst.
3 Pressthesamefunctionselectionwheelagaintoconrmtheselectedsetting.

1 Place the appliance at 40-50cm from your head, for example on a bedside table (Fig. 7).
2 Put the plug in the wall socket.
Thehourindicationonthedisplaystartsashingtoindicatethatyouhavetosettheclock
time (Fig. 8).
Setting the clock
1 Turn the middle selection wheel (SET) up and/or down to select the hour.
Note: You can only do this when you are in the set clock menu and when the hour indication ashes. If
this is not the case, press the middle selection wheel (SET) two times. You are now in the set clock menu.
2 Pressthemiddleselectionwheel(SET)toconrm.
Theminuteindicationstartsashing(Fig.9).
3 Turn the middle selection wheel (SET) up and/or down to select the minutes.
4 Pressthemiddleselectionwheel(SET)toconrm.
The appliance leaves the menu and the display shows the set clock time.
The appliance is now ready for use.
Note: Every time you remove the plug from the wall socket for more than 15 minutes, you have to set
the clock time again in the way described above. To change the set clock time when the plug is still in the
wall socket, see section ‘Menu functions of middle selection wheel (SET)’ in chapter ‘Using the appliance’.
Using the appliance
Using the lamp
You can use the appliance as a bedside lamp.
1 To switch on the lamp, press the top selection wheel (1). Then turn it to select the light
intensity level you prefer (2). (Fig. 10)
You can choose a light intensity between 1 and 20.
Note: It takes approx. 1 second for the lamp to go on. This is normal, the lamp needs to heat up.
Note: The light intensity you have selected is automatically set as the light intensity level for the alarm as
well.
Tip: When you use the appliance for the rst time, set the light intensity to 20. The moment you wake up,
check which light intensity level the appliance has reached by slightly turning the top selection wheel.
When you do this, the current alarm light intensity level appears on the display. Set the alarm light
intensity to this level for the next day.
2 To switch off the lamp, press the selection wheel again.
,
,
,
ENGLISH8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HF3475 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HF3475 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Portuguese, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info