Manual Philips HF 3463 (page 14 of 136) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

453252

Zoom out

Zoom in

1/136

Problem Solution

Perhaps you switched off the alarm function by pressing the ALARM

button.

Perhaps the lamp is defective. Replace the lamp (see chapter

‘Replacement’).

The lamp does not

work.

Perhaps you did not screw in the lamp before rst use. Screw in the

lamp (see chapter ‘Replacement’)

Perhaps you set the light intensity level too low. Turn the light intensity

wheel

@ to a higher light intensity level.

Perhaps the lamp is defective. Replace the lamp (see chapter

‘Replacement’).

I cannot switch on the

lamp again

immediately after I

switched it off.

You have to wait 3 seconds for the lamp to dim. During this time, the

button does not work.

I do not hear a sound

when the alarm goes

off.

Perhaps you set the sound level too low. Turn the volume control wheel

$ to a higher sound level.

Perhaps you switched off the alarm function by pressing the ALARM

button.

If you selected the radio as alarm sound, the radio may be defective.

Press the radio button after you switch off the alarm to check if the

radio works. If it does not work, contact the Philips Consumer Care

Centre in your country.

The radio does not

work.

Perhaps the external antenna is not properly positioned. Change the

position of the external antenna.

The radio produces a

crackling sound.

Perhaps the broadcast signal is weak. Search for the correct signal (see

chapter ‘Using the appliance’).

The alarm went off

yesterday, but it did

not go off today.

Perhaps you switched off the alarm function by pressing the ALARM

button. Set the alarm for the next day and switch off the wake-up

alarm sound and light the next day by pressing the

3 button (see

chapter ‘Using the appliance’).

Perhaps you set the sound and/or light level to a too low setting. Set a

higher sound and/or light level.

Perhaps there has been a power failure that outlasted the capacity of the

backup system. After a long power failure, the display shows an incorrect

clock time and the alarm time is 00.00. Set the correct clock time (see

chapter ‘Preparing for use’) and the correct alarm time (see chapter

‘Using the appliance’).

The light wakes me

too early/too late.

Perhaps the light intensity level you have set is not appropriate for you.

Try a lower light intensity level if you wake up too early or a higher light

intensity level if you wake up too late. If light intensity level 20 is not high

enough, move the appliance closer to the bed.

ENGLISH14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips HF 3463 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips HF 3463 Manual

Product: