453252
8
Zoom out
Zoom in
Previous page
1/136
Next page
automatically. Remove the cause of overheating, unplug the appliance and let it cool down for
approx. 20 minutes. Then switch the appliance back on by plugging it in again.
This appliance allows you to choose the light intensity level you want to wake up to (see section
‘Setting the light intensity level’ in chapter ‘Using the appliance’).
If you often wake up too early or with a headache, reduce the light level.
If you share a bedroom with someone else, this person may unintentionally wake up from the
light of the appliance, even though this person is further removed from the appliance. This
phenomenon is the result of differences in light sensitivity between people.
If you start having trouble waking up again, this is possibly due to a decrease in the lamp’s light
output that occurs after some time. In that case, you can increase the light level or replace the
lamp.
If the appliance is used in an industrial area and/or near a power station, it may occur that, under
certain circumstances, the lamp goes off after it has come on. This does not have an adverse or
harmful effect on the safe functioning of the appliance the next time it is used.

This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
Preparing for use
Screwthelampintotheappliancebeforeyouusetheapplianceforthersttime.
Installation
1 Beforerstuse,openthehatchinthebackoftheappliance(seechapter‘Replacement’)and
screwthelampintothelampholder.
Note: You nd the lamp in a cardboard box inside the appliance.
2 Placetheapplianceat40-50cmfromyourhead,forexampleonabedsidetable(Fig.6).
3 Putthepluginthewallsocket.
Thetimeonthedisplaystartsashingandarrowsappearaboveandbelowthetimeto
indicatethattheclocktimehastobeset(Fig.7).
Note: If the display does not light up after you have plugged in the appliance, press the reset button on
the bottom of the appliance.
Setting the clock time
1 Use the ^andthe%buttonstosetthetime.
2 Holdthebuttondownlongertoputthetimeforwardorbackwardmorequickly.
Note: After you have set the time for the rst time, you have to press the ‘set time’ button before you can
adjust the time again. The time on the display starts ashing and arrows appear above and below the
time to indicate that the clock time can be set.
3 Whenyouhavesetthecorrecttime,pressthe‘settime’buttontoconrmthetime(Fig.8).
Thetimeonthedisplaystopsashingandthearrowsdisappear.
Note: If you do not conrm the time, the ashing stops and the arrows disappear after 10 seconds. This
indicates that the time has been set.
The appliance is now ready for use.
-
-
-
-
-
,
,
ENGLISH8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HF 3463 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HF 3463 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info