35638
21
Zoom out
Zoom in
Previous page
1/115
Next page
18
Connecting to the mains
Always ensure the local mains voltage matches the voltage range
printed on the type plate at the back or bottom of the DVD-recorder.
If not, consult your dealer or Philips customer support.
1 Switch on the TV.
2 Insert the supplied mains cable
D into the socket
4MAINS
J at the back of the DVD recorder and the plug into
the wall socket.
P The most important features of the DVD recorder appear as
scrolling text on the display.
After the first installation is completed (all TV channels
installed) this function will be switched off.
Initial installation
After successfully connecting your DVD recorder to the TV and other
additional devices, the initial installation can start. After the basic
settings for DVD-playback, the DVD recorder automatically seeks and
stores all available TV channels.
The settings can be changed later. Refer to 'User Preferences/Settings
II'.
Switching on additional devices
If you have connected additional devices such as a satellite receiver to the
aerial cable, switch them on. The automatic channel search will recognise it
and save it. Please observe that you must switch on a "test signal" for some
additional devices.
No aerial connected
Even if you only want to use the DVD recorder to play back or have only
connected a satellite receiver, you must still complete the initial installation.
This is necessary so that the basic settings are stored correctly. Once initial
installation is complete you can use the DVD recorder as normal.
1 Press STANDBY m
2 on the remote control or
STANDBY-ON m
1 on the front.
P 'PHILIPS' and then 'IS TV ON?' will appear on the display.
P If your TV automatically switched to the programme
number for the input socket, e.g. 'EXT', '0', 'AV', you see the
following screen:
Virgin mode
Menu Language
English
Español
Français
Italiano
Deutsch
Press OK to continue
a My screen is empty.
b Depending on the initialisation procedure it can take some time
before the picture appears. Please press no button in the
meantime.
b If the TV does not automatically switch to the programme number of
the input socket, select the corresponding programme number on
your TV manually (see your TV's operating instructions).
b Check that the scart cable is connected from the TV to the EXT1
TO TV-I/O
N socket on the DVD recorder. The EXT2
AUX-I/O
M socket is only intended for additional devices.
ENGLISH
Initial Installation
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HDRW720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HDRW720 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips HDRW720

Philips HDRW720 User Manual - German - 113 pages

Philips HDRW720 User Manual - Dutch - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info