706808
26
Zoom out
Zoom in
Previous page
1/31
Next page
26 Philips · Screeneo U3
Problemen Oplossingen
De projector kan niet worden
ingeschakeld.
Ontkoppel het netsnoer, sluit het weer aan en probeer om
de projector weer in te schakelen.
De projector kan niet worden
uitgeschakeld.
Houd langer dan tien seconden ingedrukt. Als dit niet
werkt, ontkoppel dan het netsnoer.
Geen geluid
Controleer of de luidspreker is geactiveerd (druk op
en ga naar Sound - Audio Ouput)
.
Pas het volume aan met de volumetoetsen.
Geen beeld van het externe HDMI-
apparaat.
Controleer of de juiste HDMI-ingang is geselecteerd (HDMI 1,
HDMI 2 of HDMI 3).
Ontkoppel de HDMI-kabel of schakel het HDMI-apparaat uit.
Wacht drie seconden.
Sluit de HDMI-kabel weer aan of schakel het HDMI-apparaat
weer in.
Geen geluid van het externe HDMI-
uitvoerapparaat.
Stel de audio-instelling op het HDMI-uitvoerapparaat in op
Meerkanaals (Raw gegevens) en Stereo (PCM).
Geen geluid als u de computer via
een HDMI-kabel aansluit.
Controleer of het geluid op de computer is geactiveerd en
HDMI als audioapparaat is ingesteld.
2 Selecteer rechtsboven in het startscherm
en druk dan op OK om het instellingenmenu
te openen.
3 Selecteer Firmware Update - Automatic
update.
Als er een upgrade beschikbaar is,
wordt u gevraagd om de update te
starten of te annuleren.
4 Volg de instructies op het scherm om de
update te voltooien.
Software bijwerken via USB
Software downloaden
Controleer de meest recente softwareversie
op www.philips.com/support. Zoek uw
product op (modelnummer: HDP3550) en
vind ‘Software and drivers’.
Op een computer downloadt u de software
naar de USB-stick. Sla het bestand op in de
hoofdmap van de USB-stick.
Android-systeemupdate
1 Sluit de USB-stick met de gedownloade
software aan op de USB-poort met 0,5 A
erboven - niet op die met 1 A erboven.
2 Selecteer rechtsboven in het startscherm
en druk dan op OK om het instellingenmenu
te openen.
3 Selecteer Firmware Update - Local update.
4 Selecteer het updatebestand om de update
te starten.
Als het updatebestand niet verschijnt,
drukt u acht keer op de gele knop
op de afstandsbediening totdat het
updatebestand verschijnt.
5 Volg de instructies op het scherm om de
update te voltooien.
Projectorsysteemupdate
1 Sluit de USB-stick met de gedownloade
software aan op de USB-poort met 1 A
erboven - niet op die met 0,5 A erboven.
2 Druk op
om de instellingsopties
te openen.
3 Selecteer System - Firmware Update.
Probleemoplossing
Uit- en weer inschakelen
Als er zich een probleem voordoet dat niet kan
worden gecorrigeerd met de instructies in deze
gebruiksaanwijzing, volg dan de hier gegeven
stappen.
1 Schakel de projector uit door tweemaal op
te drukken.
2 Wacht ten minste tien seconden.
3 Schakel de projector in door eenmaal op te
drukken.
4 Als het probleem aanhoudt, neem dan
contact op met ons technisch servicecentrum
of uw dealer.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HDP3550 Screeneo U3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HDP3550 Screeneo U3 in the language / languages: Dutch as an attachment in your email.

The manual is 8,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips HDP3550 Screeneo U3

Philips HDP3550 Screeneo U3 Quick start guide - English - 2 pages

Philips HDP3550 Screeneo U3 User Manual - German - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info