526002

Philips HD7856 Manual

19
Zoom out
Zoom in
Previous page
1/76
Next page
19
The SENSEO
®
machine does not produce good
or enough frothed milk.
• There is not enough milk in the milk carton or jar.
• Make sure the milk carton or jug contains
enough milk.
• Make sure the milk tube is properly
connected into the milk spout and the tube is
properly placed in the milk carton or jar.
• The milk is not cold enough.
Make sure you use cold milk straight from the
refrigerator (5°C-8°C).
• You did not use cow’s milk.
To achieve the best frothing results we advise
you to use semi-skimmed cow’s milk at
refrigerator temperature (5°C-8°C).
• The milk froth quality decreases over time.
The milk spout and milk tube may be dirty.
Disassemble all the parts of the milk spout and
milk tube. Clean them thoroughly with a brush
and some washing-up liquid or put them in the
dishwasher. See chapter ‘Cleaning the milk spout’.
• The coffee machine is clogged by scale and
needs to be descaled.
Perform the descaling procedure as described
in chapter ‘Descaling’.
The milk froth continues to ow from the milk spout.
• The milk continues to ow more than a few
seconds.
• Make sure you place the milk carton or jar on
the same level as the coffee machine.
• I cannot open the lid.
• Overpressure may have temporarily formed
under the lid.
• Switch of the coffee machine. Pull up the lever
and wait 24 hours before you open the lid.
You may need to use some force.
• Always make sure the pod holders are clean
and the centre of the sieve is not clogged to
prevent over pressure.
One cup indicator lights up.
• You pressed the recipe button once to brew
one cup of coffee.
• Press the recipe button once more if you
want to brew two cups of coffee. In this case,
both cup indicators light up.
Two cup indicators light up.
• You pressed the recipe button twice for two
cups of coffee.
• If you want to brew just one cup of coffee,
press the recipe button once more. In this
case, only one cup indicator lights up.
The coffee is not hot enough.
• The machine has been used for a longer
period of time without descaling.
Perform the descaling procedure as described
in chapter ‘Descaling’.
• The coffee temperature quickly decreases in
the cup.
• Do not use cups that are too large.
• Use thin-walled cups. Thin-walled cups absorb
less heat from the coffee than thick-walled cups.
• You can preheat the coffee machine and cup
by brewing a cup of hot water rst without
placing a coffee pod in the pod holder.
• The coffee speciality with fresh milk is not hot
enough.
• This is normal. A milk-based coffee recipe
is less hot than a cup of black coffee. Milk is
heated to a lower temperature to ensure
high-quality milk froth.
The touch panel with recipe buttons does not work.
• There may be water on the touch panel.
• Make sure your hands and the touch panel
are dry when you choose a coffee recipe.
• Make sure that the voltage indicated on the
coffeemaker corresponds to the local mains
voltage.
ENGLISH
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HD7856 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HD7856 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info