C
5 Clean the pod holders in hot water, if necessary with some
washing-up liquid, or in the dishwasher.
Check if the hole in the centre of the pod holders is not clogged. If the
hole is clogged, unclog it by holding the pod holder under a running
tap. If necessay, you can use a washing-up brush or a pin to unclog the
hole.
C
6 Clean the water reservoir in hot water, if necessary with some
washing-up liquid.
Use a soft brush to clean the water reservoir. Do not use aggressive or
abrasive cleaning agents and materials.
B
Tip: Subborn scale stains can be removed by means of vinegar. Fill the
water reservoir with white vinegar (4% acetic acid) and leave it in the
reservoir for a few hours.Then rinse the water reservoir a few times with
clean water.
7 Rinse the parts with fresh water after cleaning and put them
back into the machine.
C
8 Clean the water distribution plate with a moist cloth.
Be careful when you do this; make sure that the rubber sealing ring
does not get stuck under the edge of the water distribution plate. If it
does, the coffee machine will start leaking!
Descaling
Regular descaling will prolong the life of the coffee machine and will
guarantee optimal brewing results for a long time. If the machine is
used twice a day on average, it must be descaled once every 3 months.
C
1 Fill the water reservoir up to the MAX indication with descaler
and water according to the instructions on the package of the
descaler.Then put the water reservoir back into the coffee
machine.
Use a descaler based on citric acid.
C
2 Press on/off button 3.
The machine is ready for use when the pilot light burns continuously.
3 Place the 1-cup pod holder in the coffee machine, preferably
with a used coffee pod in it. Close the lid and make sure it is
properly locked.
We advise you to put a used coffee pod in the pod holder when you
descale the machine.This pod will serve as a 'filter' to prevent the hole
in the pod holder from getting clogged with scale residues.
ENGLISH 11
