14
The appliance is steaming and it takes longer to
brew coffee.
• Descale the appliance. See section ‘Descaling
the coffeemaker’ in chapter ‘Cleaning and
maintenance’.
The lter overows when I remove the jug from
the coffeemaker while it is brewing coffee.
• If you remove the jug for more than
20 seconds during the brewing process, the
drip stop causes the lter basket to overow.
Also note that the coffee does not reach its full
taste before the end of the brewing process.
Therefore we advise you not to remove the jug
and pour out the coffee before the end of the
brewing process.
The coffeemaker continues to drip long after the
brewing process has ended.
• The dripping is caused by condensation
of steam. It is completely normal that the
coffeemaker drips for some time.
• If the dripping does not stop, the drip stop may
be clogged. To clean the drip stop, pull at the
tab of the lter basket holder on the right side
of the coffeemaker to open the holder. Take out
the lter basket. Then rinse the lter basket and
the drip stop under the tap.
• If you remove the jug for more than 20 seconds
during the brewing process, the drip stop
causes the lter basket to overow.
The coffee is not hot enough.
• Use thin-walled cups, because they absorb less
heat from the coffee than thick-walled cups.
• Do not use milk that comes directly out of
the fridge.
• Descale the coffeemaker. See section ‘Descaling
the coffeemaker’ in chapter ‘Cleaning and
maintenance’.
The coffeemaker does not start cleaning the
coffee bean chute.
• Make sure the coffeemaker is connected to
the mains.
• Make sure the lid of the coffee bean chute is
opened before pressing and holding the grinder
button for 4 seconds.
• Press and hold the grinder button for 4 seconds
until the grinder starts cleaning itself.
