672118
10
Zoom out
Zoom in
Previous page
1/56
Next page
7 Open the lid of the filter holder.
8 Put a paper filter size 102 in the filter holder. Make sure that you fold the sealed edges to ensure
that the paper filter stays upright during brewing (Fig. 13).
9 Use the measuring spoon to put the required amount of pre-ground coffee in the filter (Fig. 14).
Tip: Use one measuring spoon of pre-ground coffee for each cup. Use a heaped measuring spoon
for strong coffee and a level measuring spoon for mild coffee.
10 Close the lid of the filter holder.
11 Slide the insulated jug on the platform of the machine (Fig. 15).
12 Press the jug button to start the brewing process (Fig. 16).
-
The light in the jug button starts flashing and the brewing process starts. (Fig. 17)
Note: If the jug button and the CALC light start flashing alternately during heating up and brewing
(Fig. 18), you need to descale the machine (see 'Descaling the machine').
-
When all the water from the water reservoir has passed through the filter, the light in the jug
button goes out and the machine switches off automatically.
13 You can now remove the insulated jug from the machine (Fig. 19).
14 Remove the filter holder from the insulated jug (Fig. 20).
Tip: You can place the filter holder on the drip tray to prevent coffee from leaking onto your
worktop while you pour out coffee from the jug (Fig. 21).
15 Place the jug lid on the insulated jug and turn it to the keep-warm position (closed lock symbol)
(Fig. 22).
16 Push the lever of the jug lid to pour coffee into one or more cups (Fig. 23).
Brewing pod coffee
Brewing one cup of pod coffee
1 Fill the water reservoir with clean cold water up to the MAX indication and put it back onto the
machine (Fig. 3).
Note: The MIN indication on the water reservoir indicates the minimum amount of water required
for brewing pod coffee. Always fill the water reservoir beyond the MIN level.
2 Put the plug in an earthed wall socket.
3 Open the lid of the machine by moving the lever upwards (Fig. 9).
4 Place the drip tray on the platform of the machine (Fig. 24).
5 Place one pod in the 1-cup pod holder with the convex side pointing downwards (Fig. 25).
Note: Make sure that the pod holder is clean and the sieve in the center is not clogged, e.g. with
loose coffee grounds.
Note: Make sure that the coffee in the pod is distributed evenly and press the pod lightly into the
pod holder.
6 Place the 1-cup pod holder in the machine and close the lid (Fig. 5).
7 Place a cup on the drip tray (Fig. 26).
8 Press the 1-cup button to brew coffee. (Fig. 27)
-
The button starts flashing and the machine starts heating up (Fig. 28).
Note: If the 1-cup button and CALC light start flashing alternately during heating up and brewing
(Fig. 29), you need to descale the machine (see 'Descaling procedure ').
10
English
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HD6591 Senseo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HD6591 Senseo in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info