706929

Philips HD2651 Manual

5
Zoom out
Zoom in
Previous page
1/54
Next page
guarantee leaet). If there is no Consumer Care
Centre in your country, go to your local Philips
dealer.
Before rst use
Put the toaster in a properly ventilated room
and select the highest browning setting. Let
the toaster complete a few toasting cycles
without bread in it. This burns o any dust
and prevents unpleasant smells.
Toast, reheat, or defrost bread (g.2)
Note:
• Do not operate the appliance without
the crumb tray.
• Never force bread into toasting slots.
Never toast bread slices that have been
buttered. Take extra care when toasting
breads that contain sugar, preserves,
raisins or fruit bits, due to risk of
overheating. Do not use bent, damaged
or broken bread slices in your toaster as
it may get jammed into the slot or stuck
in the toasting chamber.
To toast bread, follow the steps 1, 2, 3, 4.
• Select a low setting (1-2) for lightly
toasted bread.
• Select a high setting (6-8) for darkly
toasted bread.
To reheat bread, press the reheating setting
button ( ).
To defrost bread, press the defrosting setting
button ( ).
Note:
• You can stop the toasting process
and pop up the bread at any time by
pressing the stop button (STOP) on the
toaster.
Tip:
• You may use dierent browning settings
when toasting dierent types of bread:
• For dry, thin or stale bread, select a
lower setting. This type of bread has
less moisture and it will go brown
quicker than moist, thick or fresh
bread.
• For fruit bread like raisin bread,
select a lower setting.
• For higher sugar content bread,
select a lower setting.
English
9
EN
• For heavier textured bread like rye
bread or whole wheat bread, select
a higher setting.
• When you toast one slice of bread,
browning of toast may be slightly varied
from one side to the other.
• For bread that may have loose food
bits, for example raisin bread and whole
wheat bread, remove the loose bits
before putting bread slices into the slot.
This can avoid potential ame/smoke
resulting from loose food bits dropping/
sticking in the toaster chamber.
Bun warming (g.3)
To warm buns, follow the steps below:
a Push down the warming rack lever to
unfold the warming rack.
b Turn the browning control to the bun
warming setting ( ).
Note:
• Do not place bread on bun warming
rack to avoid damage to toaster.
• Never put the rolls to be warmed up
directly on top of the toaster. Always use
the warming rack to avoid damage to
the toaster.
Cleaning (g.4)
Warning:
• Never use scouring pads, abrasive
cleaning agents or aggressive liquids to
clean the appliance.
• Lightly tap the toaster housing to
dislodge any bread crumbs in the
toaster chamber.
• Allow toaster to cool down for 30
minutes after use before cleaning the
toaster.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HD2651 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HD2651 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info